Podrška

tehnicka

Tehnička podrška je prvenstveno namenjena našim klijentima, ali i korisnicima koji su fazi testiranja programa pre kupovine.

 

  Uputstva za upotrebu (eng) 
  Često postavljana pitanja
  Preuzmite poslednju verziju programa
  Mali trikovi

 

Pitanja za tehničku  podršku se postavljaju putem fomulara, e-mail-a ili telefonskim putem.

Korisnička uputstva

U ovoj sekciji se nalaze korisnička uputstva za korišćenje progeCAD-a, kao i pojedinih modula:


 progeCAD 2024 Professional korisničko uputstvo (eng)


perspectivecorr result

Uputstvo za primenu AutoSEZ dodatka (eng)


perspectivecorr result

Uputstvo za korekciju perpetkive slika (eng)


perspectivecorr result

Uputstvo za konverziju slika i nevektorskih PDF-ova u DXF (eng)


perspectivecorr result

Uputstvo za primenu AutoSEZ dodatka (eng)


Mali trikovi

Na ovoj stranici su dati mali trikovi kojima možete ubrzati i olakšati rad u progeCAD-u:

  1. Ubrzajte rad u progeCAD-u 2024
  2. Promenite veličinu skoka zuma pri zumiranju mišem
  3. Ažuriranje progeCAD-a

1. Ubrzajte rad u progeCAD-u 2024

Pre pokretanja progeCAD-a proverite da li imate instalirane najnovije verzije drajvera za grafičku kartu.

Hardversko ubrzanje

Da bi ste isključili hardversko ubrzavanje otvorite Opcije preko menija Tools/Options.

Nakon toga otvorite jezičak Display i isključite opciju Hardware acceleration.

Hardversko ubrzanje 

Nakon toga ugasite progeCAD i ponovo ga pokrenite.

Podesite OpenGL podršku

Ukoliko isključivanje hardverskog ubrzanja nije ubrzao rad u progeCAD-u, izmenite globalnu promenljivu MINOPENGL. Ova promenljiva definiše koja je minimalna verzija OpenGL-a neophodna za za aktiviranje grafičkog ubrzanja. Podrazumevana vrednost MINOPENGL promenljive je 20.

Korisnici koji imaju starije sisteme ili imaju problema sa kurzorom/grafikom, trebali bi da smanje vrednost ove promenljive na neku nižu vrednost.

Da bi ste promenili vrednost MINOPENGL promenljive, neophodno je da u komandnoj liniji otkucate sledeću komanu:

MINOPENGL

Promenljiva MINOPENGL može da ima vrednosti između 10 i 20. Unesite neku nižu vrednost i pritisnite ENTER.

OpenGL podešavanja

 

2. Promenite veličinu skoka zuma pri zumiranju mišem

Ukoliko pri zumiranju crteža vam se čini da su “skokovi” suviše veliki, pogledajte koju vrednost ima promenljiva ZOOMFACTOR. Podrazumevana vrednost je 60, a promenljiva može da ima vrednost između 3 i 100. Ukoliko su skokovi veliki, smanjite vrednos na npr. 30:

Ukucajte ZOOMFACTOR u komandnu liniju i pritisnite ENTER. Nakon toga unesite željenu vrednost i ponovo pritisnite ENTER.

3. Ažuriranje progeCAD-a

ProgeCAD možete ažurirati na dva načina – automatski ili ručno.

Automatsko ažuriranje

Automatsko ažuriranje pokreće sam progeCAD, ukoliko je ažuriranje dostupno na sajtu proizvođača. Takođe, automatsko ažuriranje se može pokrenuti i preko menija Help/Check for progeCAD update.

Nakon pokretanja, progeCAD će izvršiti proveru dostupnosti ažuriranja i, ako je ono dostupno, preuzeće instalaciju koja će se pokrenuti nakon sledećeg pokretanja progeCAD-a.

Ažuriranje

Ručno ažuriranje

Ukoliko progeCAD-u nije dozvoljen pristup internetu, korisnik mora sam da preuzme datoteku za ažuriranje preko linka koji se nalazi na našoj naslovnoj strani (u okviru sekcije “Aktuelna verzija”), isključi progeCAD i onda pokrene preuzetu instalaciju. Nakon završetka instalacije, progeCAD će biti ažuriran.

Nakon svakog ažuriranja programa, preporučljivo je da resetujete sva podešavanja progeCAD-a.

Resetovanje se vrši pokretanjem programa progeCAD 2024 Professional Center, koji se nalazi u Start meniju – Start/progeCAD 2024 - English (x64)/progeCAD Center 2024 - English /x64). Kada se program pokrene odaberete stavku Utility, a zatim Toolbar and Menu. Odaberite Default profil i kliknite na OK.

Kada se pojavi prozor Reset configuration uključite samo stavke Configuration, Search paths, Menu, Toolbar, Aliases, Keyboard Shortcuts i Tablet setings. i kliknite na OK, a zatim na Yes.

Nakon ovog postupka, progeCAD će biti vraćen u “fabričko” stanje i neophodno je opet primeniti prvi savet – Ubrzajte rad u progeCAD-u 2024.

 

Često postavljana pitanja

Ukoliko budete imali dodatnih pitanja, možete da nam se obratite putem e-maila ili putem telefona!

Minimalni sistemski zahtevi su:

  • Microsoft Windows® 7, Windows® 8, Windows 8.1®, Windows 10® ili Windows 11®
  • 2.2 GHz 32-bit (x86) ili 64-bit (x64) procesor
  • 4 GB RAMa
  • 4 GB prostora na hard disku

Preporučeni sistemski zahtevi su:

  • Microsoft Windows 10®
  • 2.5 GHz (ili brži) 32-bit (x86) ili 64-bit (x64) procesor
  • 8 GB ili više RAM-a
  • 4 GB prostora na hard disku

progeCAD Professional se, za razliku od AutoCAD-a, prodaje kao trajna licenca koju možete koristiti dokle god Vam odgovara, a nadogradnju na najnoviju verziju možete kupiti bez obzira koliko staru verziju programa posedujete.

Licenca programa progeCAD Professional dolazi kao elektronska licenca. Licenca se isporučuje putem e-mail poruke u kojoj se nalazi serijski broj i uputstvo za aktivaciju, kao i linkovi za preuzimanje instalacije programa.

Prema korisničkom ugovoru, progeSOFT SA dozvoljava da se jedna licenca instalira na jednom desktop računaru i na jednom laptop računaru..
Jedini uslov za takav način korišćenja licence je da i laptop i desktop koristi isti korisnik, odnosno da se licenca na laptopu koristi kada se korisnik (koji koristi desktop) nalazi na terenu. Odnosno, nije dozvoljeno da u isto vreme dva različita korisnika koriste istu licencu.

Probnu verziju programa možete preuzeti iz naše Download sekcije. Jedino što je potrebno je da popunite formular, nakon čega ćete dobiti e-mail sa linkom za skidanje probne verzije programa. Sve probne verzije programa su u potpunosti funkcionalne 30 dana.

iCARE je jednogodišnja članarina koja Vam omogućava da uvek imate aktuelne ispravke progeCAD-a, besplatne nadogradnje i stalan pristup tehničkoj podršci.

iCARE članarinu je moguće kupiti u toku prvih 30 dana od dana aktivacije programa.

Standardna cena iCARE članarine je 170 € + PDV, a ukoliko se iCARE članarina kupi zajedno sa progeCAD-om Professional, dobija se popust od 18% na cenu članarine.

Kupite iCARE

Standardno, po instalaciji, progeCAD je podešen da štampa crteže ne uzimajući u obzir debljinu linija koje korisnik koristi. Da bi ste pri štampanju dobili linije koje imaju različite debljine, potrebno je da u dijalogu za štampu, u jezičku "Advanced" uključite stavku "print lineweights"

Najbolji i najispravniji način da se uverite u mogućnosti progeCAD-a je da ga probate.Na ovaj način ćete se veoma lako uveriti koje su mu stvarne karakteristike, a šta je samo reklama.

Molimo Vas da iz naše Download sekcije skinete probnu verziju, koja je u potpunosti funkcionalna 30 dana.

Pritisnite dugme "LWT" u Statusnoj traci, da bi ste uključili ili isključili prikazivanje debljine linije.
ILI:
  • Izaberite "Drawing Settings" iz Tools menija
  • Pod tabom "Display", izaberite "lineweight"
  • Uključite "display lineweights"
  • Potvrdite podešavanja

Ako koristite progeCAD 2012 ili noviju verziju, pratite uputstva čarobnjaka za registrovanje (automatski se učitava kada pokrenete proces registracije) uz konsultaciju sa uputstvom za registraciju koje ste dobili pri kupovini progeCAD-a.
U slučaju da koristite starije verzije programa, molimo Vas da nas kontaktirate.

Ispravke u aktuelnoj verziji

Verzija 25.0.6.8 (7. oktobar 2024.)

Nova verzija donosi niz unapređenja i ispravki:speed_proge.gif

Fixed zoom on print preview on 4K monitors
Fixed freeze of progeCAD working in a drawing with 3d solids
Fixed set of margins for PDF, DWF, PNG printers
Fixed quick properties palette to display "Locked" property for Viewport
Fixed bug preventing DXF files from being saved (QSAVE) with the correct name
Fixed search of SHX fonts when file extensions are not specified in the drawing
Fixed display of materials for 3d Solid in some specific drawings
Fixed program slowdown during the osnap operation with "Center Snap" enabled, in drawings with a large number of arcs
Fixed opening of DXF files with the opened layer palette
Fixed SAVE to old DXF formats with the opened EXPLORER palette
Fixed possible freeze of progeCAD loading the drawing in a script or lisp
Fixed face grip edit in the _SOLIDEDIT command with a custom UCS
Fixed alias renaming operation in the ALIASEDIT dialog
Fixed the _OBJECT option of the command SECTION
Fixed freeze of progeCAD opening drawings containing XREF with the opened layer palette
Restored modified drawing symbol ('*') in the drawing tab switching to another document
Fixed bug that disabled polar tracking removing an entity from selection (SHIFT + window selection)
Fixed EXTEND with COMMANDPREVIEW ON selecting entities to extend with window
Fixed insertion of ALIAS from the CUI customization dialog
Fixed incorrect results of FILLET with Radius 0
Fixed incorrect results of TRIM starting from the second segment you trim
Fixed the QLEADER command to create a non-annotative leader even if the current dimension style is annotative
Fixed display of transparent pixels of TIFF images
Added ability to drag and drop layout tabs to change the order
Added ability to operate on multiple layouts using Shift+Click
Fixed copy layout with the 'Select all Layouts' option
Fixed the "Failed to initialize Artisan" error using Artisan render
Fixed regen editing hatches using grips
Fixed scale of imported entities from STEP/IGES according to the settings of the unit
Fixed show/hide of spline control vertices grips
Fixed the HIDE command to hide OLE frames
Improved performance of XREFs
Fixed crash when saving after REFCLOSE
Fixed print of large images to PDF
Fixed crashes using MTEXT in specific situations
Fixed the setting of color for table cell borders
Added saving of "Drawing length unit" control value in the PUBLISHKML command dialog
Fixed the compatibility of digital signature with incremental saving
Fixed the digital signature using the card ID reader
Fixed key prompt error in single DOCFA export
Added "Selected objects" (dummy) layer filter to the layer explorer dialog
Fixed MTEXT field error
Fixed the "Isolate layer" menu from the layer palette, now it turns OFF or locks layers based on the LAYISO command
Removed useless information from error report in OPEN,SAVE commands
Fixed DTextEditor [MTEXT] issue when copying/pasting text from WORD (RTF format)
Fixed extension set in proposed file name in the export save dialog
Fixed PASTE of images as OLE
Fixed issue with executing command from text pasted into the command line (CTRL+V) copied from cells of an Excel file
Fixed FILLET issue on polylines and arcs
Improved the display speed of linetype combobox in the ribbon, toolbar and property palette
Fixed the CTL command selecting multiple entities
Ordered name of layers in the CTL command
Fixed EXTEND selection issue in the ORTHO mode.
Fixed incorrect cell preview in the "Table Style" dialog
Fixed table preview flow direction in the "Insert Table" dialog
Improved speed of esnap on large 3d solids
Fixed automatic regen in layout
Fixed correct resolution of mathematical expressions in the numeric fields of the property palette
Fixed print and preview of JPG and PNG printers
Improved starting and closing time when one of the last opened drawings is on an unavailable network path
Improved speed of closing of the IMAGE dialog
Fixed graphic artifact on the property palette and the command bar using the ALIASEDIT command
Fixed Display of colors of 3d ACIS faces
Fixed the _LAYERP command that sometimes can't undo the last change made to layer settings
Introduced HSL model limits for the hue (0-360), saturation (0-100) and luminance (0-100) parameters in the color dialog
Fixed CTRL + DELETE not deleting words in Text Editor
Fixed text being pasted as an empty string when copied from an MTEXT and pasted in the drawing area
Fixed selection window leaves garbage on screen with HWACCELERATION off
Fixed the IMAGEATTACH dialog with LUPREC == 0
Fixed WATCHPATH to ask to empty filename
Fixed print PNG or JPG with Window setting
Fixed crash opening a corrupted DXF
Fixed need to select viewports twice to LOCK them from the context menu
Fixed ESNAP on MLINE in blocks or arrays
Fixed print preview zoom with the mouse wheel
Fixed the behavior of ‘Show Window Menu’ in the status bar
Set closest paper size in drawings coming from other CAD programs
Fixed crash occurring sometimes when starting progeCAD
Set the PRINTAUTOROTATE variable to 1 by default to manage paper orientation
Fixed print of text on SHARP BP-50M26 PCL6 driver
Fixed freeze of progeCAD modifing LINETYPE from the ribbon menu
Fixed text replace in the _FIND command
Fixed OVERKILL using the "Combine lines and arcs" option
Fixed TANGENT esnap for circles
Added the MKSHAPE and MKLTYPE commands
Fixed set of the default layer for new dimensions from the _DIMSTYLE dialog
Fixed print of silhouette in the hidden line mode
Improved open and regen of ACIS objects
Fixed the underscore '_' char not printed/visible in the command line
Added control in the OPEN/SAVE window : if the dwt extension is selected, the dialog moves to the TEMPLATESPATH folder
Improved speed of layout switching
Implemented the PLOTTRANSPARENCYMODE variable to switch between OpenGL and GDI plot devices:
PLOTTRANSPARENCYMODE & 1 : print with OPENGL
PLOTTRANSPARENCYMODE & 2 : preview with OPENGL
Fixed zoom in/out in a layout of a specific drawing
[MULTIPLOT] Implemented save of page configuration in a drawing and implemented concatenation of PDF generated using PC3
Added preservation of print options set from old progeCAD printers (pfd or jpg)
Improved speed of FLATSHOT/SOLPROF with 3d polyface mesh
Fixed wrong angle results in a custom ucs (non-global ucs) for the MEASUREGEOM command
Fixed correct management of print scale options in the _MULTIPLOT command
Improved image thumbnail quality saving dwg files
Moved the "Prompt boxes transparency (%)" option from the Display tab to the Right-Click Customization dialog (in "General" tab)
Removed multiple warning messages importing a tool palette with blocks from other CAD programs
Restored the geometric center snap on a closed spline
Improved speed of boundary finding in a drawing with splines during the HATCH command
Improved display of wall components in the AECSTYLES dialog using meters drawing unit (AEC)
Fixed display of the image in AECSTYLES-> Window -> dimension (AEC)
Added style preview to the AECStyle dialog (AEC)
Added AEC entity properties to the quick property configuration dialog (AEC)
Improved speed of the choose style dialog (AEC)
Fixed creation of railings with custom blocks (AEC)

PROGRAMMING

[ARX] Implemented the CAdUiTab class
[ARX] Implemented an `IcApDocManagerReactor::documentTitleUpdated` event
[ARX] Implemented some functions of the AcUiFileDialog class, removed "not implemented" exception from AdUiClass::PreSubclassWindow
[ARX] Fixed generation of AcEditorReactor events
[ARX] Fixed AcGeVector2d and AcGeVector3d members to avoid throw of exceptions in special conditions
[ARX] Fixed display of a dialog over the palette from ARX
[ARX] Fixed a CAdUiPalette::SetName fuction
[ARX] Fixed a getMenuContext function to retrieve the current selection object id
[ARX] Fixed creation of the context menu from an arx module
[ARX] Fixed the function sendStringToExecute to accept the ending '\n'
[LISP] Fixed the declaration of the -BIMIMPORT command used in script/lisp
[LISP] Fixed the QSELECT option from the LISP ssget function
[VBA] Fixed plot to file using the ActiveX interface with some drawings

 

Verzija 25.0.4 (26. jul 2024.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed crash changing background color for various entities from the property palette
Fixed paper rotation selecting large pixel image size
Fixed print preview of JPG and PNG pc3
Restored image zoom performance and improved quality of bitonal images
Fixed the "Lines merge control" option in the PDF settings dialog
Fixed MTEXT edit field errors
Fixed cursor displayed in the arrow shape after MTEXT editor closes
Fixed TRIM in paperspace with COMMANDPREVIEW on
[AEC] Fixed delete of used AEC style
Created the _CONVERTSPLINE command which converts selected Splines into Polylines or 3D Polylines by specifying their precision
Set the default margins of ALL paper formats for DWG to PDF.pc3 printer to zero
Improved quality of the PDF,DWF,DWfx preview
[AEC]Updated English AEC styles family files
Changed the default value of the OVERKILLMODE sys var, to disable as default "Combine adjacent lines and arcs into polylines" control in the _OVERKILL dialog
Fixed losing focus on the edit control when the cursor moved over the drawing area even if the value is being edited
[ARX]Fixed tolerance of ARX AcGeMatrix3d::inverse
Fixed insert of BLOCKS with duplicated attributes
Fixed the transparency of images in the PDF print preview
[AEC] Avoided import of curtain wall, curtain wall unit and window assembly styles
Fixed the display of JPG images with CMYK 32 bit color profile
Fixed progeCAD preferences saving to registry behavior
Fixed crash analyzing crash reports
Fixed crash opening drawings with missing XREF
Fixed open of corrupted drawings
Fixed crash when building dataextraction table with the _DATAEXTRACTIONNEW command in non English progeCAD versions
[VBA]Fixed SetXData method in the VBA procedure
Fixed exception starting progeCAD when one recent file has bad timestamp
Fixed ETRANSMIT to include XREF in the zip file
[VBA]Added control to avoid progeCAD occasional crashing using the SetXdata procedure
[ADVBlocks]Fixed the Loss of parameters and actions of Advanced Blocks using RENAME command
Fixed creation of zip from etransmit changing dwg save format
Fixed crash editing a block in a damaged drawing
Fixed crash editing a dynamic block with constraints blocking BEDIT
Fixed error in attaching (_ATTACH) file with non latin characters in the file name
Fixed the EATTEDIT dialog to insert directly field code in the attribute
Fixed unable to edit blocks from layout VP
Fixed empty message unchecking all copyclip options in the OPTIONS dialog
[AEC]Fixed draw of railing with between component panels
[AEC]Fixed update of AEC style preview after resize of window
[AEC]Increased the size of style tree in the AEC styles dialog
Fixed right-click context menu having the same underscore char
Changed the default options [Data Compression(true) and Optimize Simple Geom(true)] for DWG to PDF.pc3 file and related PC3
Fixed the problem in generating very heavy PDFs with DWGtoPDF.PC3 device and related PC3
Fixed set of dynamic view mode properties from the property palette
[AEC]Fixed various problems drawing curtnail walls
Fixed correct setting of the templates default path in the _NEW command
[AEC]Fixed preview of curtain wall styles with inches or feet units
[AEC]Fixed preview of Railings styles with inches or feet units
Fixed MULTIPLOT Command considering line weights in printing operation
Modified AEC menus (Ribbon, Pop Menu and Toolbars) to open the style dialog for WALL, CURTAINWALL, WINDOW, DOOR and RAILING
[ARX] Implemented documentBecameCurrent event
[ARX] Fixed sendStringToExecute to allow ending '\n' in command
[ARX] Fixed getMenuContext function to retrieve current selection object id
[ARX] Fixed AcGeMatrix in case of degenerated cases
[ARX] Fixed AcDbDatabase::getAcDbObjectId function
Hidden View control buttons during load of drawings
[ARX] Fixed getMenuContext function to retrieve current selection object id
Fixed size of dashed rubberband line with metric measurement
[VBA]Fixed crash setting scale from VBA of blockreference that doesn't allow non uniform scaling
[ARX] Fixed acedAddObjectContextMenu to register context menu of AcDbEntity
Fixed print of some CIRCLES and POLYLINES on PDF
[ARX]Fixed several AcGeVector2d and AcGeVector3d ARX functions to avoid exception generation
Fixed FLATSHOT command bug in creation of Arc entities
Fixed plot/export DWF size and page settings
[ARX] Fixed exception using normalize method of AcGeVector2d and AcGeVector3d in caso of zero length vectors
[Arx] Fixed acedAddObjectContextMenu() method throws exception and causes a crash
Fixed correct collection of CTB files in ETRANSMIT command
Fixed folder used to save pcad.log file
Listed point coordinates are fixed + extrusion values fixed
Fixed support for round and trunk support in FIELD (table, attribute, text, mtext entities)
Fixed visualization of POINT entity in XREF
[ARX] Fixed ARX setDatabaseDefaults function used without parameters
Fixed crash with unexpected paper format name
Fixed crash trying to write log file in invalid position
Added possibility to add a comma separated list of distances in the "Add Distance Value" dialog for Dyn Block parameter
Added "Open in editor" option to BLOCK dialog
Added possibility to launch _BACTIONSET command from property palette too
Fixed correct evaluation of string expression starting with operator in dyn input
Set previous selection set using DIVIDE or MEASURE command
Fixed load of .NET dll using APPLOAD startup suite
[NET] Fixed resize of .NET WPF palette also considering DPI Windows scaling
Fixed flashes resizing .NET palette like translator
Removed font substitution dialog when FONTALT specify also bigfont substitution
Changed VSCURRENT command to accept "2" or "2D" options
Fixed start point of the arc when using "Follow" option of the _ARC command
[NET] Implemented PaletteActivated event in .Net PaletteSet object

Verzija 24.0.6.18 (21. septembar 2023.)

Nova verzija donosi niz unapređenja i ispravki:speed_proge.gif

[.NET][VBA] Fixed exception opening and closing multiple drawings
Fixed exception using IMPOINT command
Fixed creation of DIMLINEAR dimensions with intersection esnap on nested blocks
Removed set and reset of ORTHOMODE variable during entity selection
Fixed imageclip of rotated images
Fixed open of drawings with section entity
Fixed crash on bad drawing path in ribbon recent file list
Fixed selection by entity type in selection pane in localized versions
Fixed ALIASEDIT command with localized versions of commands
Fixed exception with print preview setting page setup in PUBLISH dialog
Fixed highlight of hatch during REFEDIT
Fixed exception opening drawing with unsupported GEO connection
Fixed crash creating a new printer configuration (pc3) using command CONFIGUREPRINTERS
Added possibility to specify a whitelist of the IP Addresses in the NLM Server Monitor Admin Panel
Fixed TRIM using XLINE, RAY, 3DFACE, WIPEOUT, MLINE as cutting edges
Disabled default of "Hide point entity in block"
Fixed crash editing tolerance objects
Fixed progeCAD unable to recognize command "_DWFIN"
Fixed Text Height of the Leader not modified at the contextual ribbon menu.
Improved visibility of the texts of the "non-editable" fields of the properties mask, when the selected theme is the light one.
Fixed crash customizing paper size
Fixed ORTHOMODE not disabled after using SHIFT during TEXT rotation input
Removed set and reset of ORTHOMODE variable during entity selection
Fixed prompt on command line of GRIP command
Fixed selection preview to avoid cancel of current command (like CHAMFER of FILLET)
Improved block preview generated after dragging the block to the toolpalette or by click on "Update Tool Image" on the block tool. Now the background of the preview depends on the current UITHEME.
Fixed open of drawing with missing fonts on Windows 7
Fixed "remove boundary" from HATCH dialog
[VBA]Fixed exception printing from ActiveX called from LISP function
Fixed save and restore of opened EXPLORER palettes
Fixed creation of regions from VBA
Added "Display the REFEDIT preview" option to the "Display" tab of the OPTIONS dialog
Fixed DIST output ignoring DIMZIN
Fixed DIST output in case of architectural units
Fixed crash using toolbar editing MTEXT
Fixed display of point sized entity outside blocks
Fixed creation of REVCLOUD when DIMSCALE isn't 1.0
Fixed display of isolines of 3D solids with spline surfaces
Fixed update of datalink from status bar
Fixed paper preview in plot dialog
Fixed crash when none of the options is selected (pressed ENTER for each prompt that requires an option) in TCOUNT
Fixed print of text with mixed Korean and latin symbols
Fixed opening wrong drawing when the user click over a recent document item's tooltip on Start Page instead of the preview
Improved "Entity" Selection Filter. Now it will display localized entity names
Fixed HATCH command with imperial units after creation of custom Hatch
Fixed search of fonts in current drawing folder opening drawing
Implemented multiple XREF selection in XREF dialog
Restored Sheetset and formula fields category
[LISP]Fixed refresh of layer palette deleting a layer using LISP
[LISP]Removed error message when tear-off menu is missing
Added tooltip near cursor to show AREA and perimeter
Fixed "saved with error" changing color of 3d polyline created by TXTEXP command
Fixed CENTERMARK command to use CENTEREXE variable
Implemented MATCHPROP for CENTERMARK objects
Added CENTERMARK objects to ADDSELECTED command
Fixed color of fence selection line when background is white
Fixed dynamic input to support surveyors angle
Fixed input of imperial distance in dynamic input
Removed ORTHO, ORTHOGONAL from command history to avoid to repeat command with enter
Fixed type of scale in viewport scale drop-down
Fixed selection of scale from list in Viewport scale drop-down
Fixed incremental save in OPTIONS dialog: incremental save is turned ON/OFF only by ISAVEPERCENT variable
Fixed right click to start keywords from dynamic input
Fixed problem that prevented the import of blocks downloaded from CADENAS/TRACEPARTS and its correct placement in the right iCADLib folder
Added extension DWFX to DWFIN command
Fixed crash using PUBLISH

Verzija 24.0.4.8 (29. maj 2023.)

Nova verzija donosi niz unapređenja i ispravki:

Disabled block insertion unit item in entity property palette
[LISP]Removed error message when tear-off menu is missing
[.NET]Fixed crash printing different drawings from .NET
Fixed PUBLISH and other commands to accept more and multiple long filenames
Fixed EXOFFSET command
Changed default of FULLPLOTPATH to 0 to restore 2022 default filename in case of PDF printing
Added 2 decimal digits to page preview in plot dialog
Added CHECKFILEDIA variable to reset FILEDIA variable to 1 at start time
Fixed TRIM to select single entities as cutting edge
Fixed crash getting area of complex hatch
Fixed MEASUREGEOM command with '°' symbol on angles
[.NET] Fixed save of drawing opened from .NET without editor
Fixed load of LAS file with non latin chars in path
Fixed Serious problems editing grips with DynInput with rotated UCS
Fixed crash when switching property palette to tree view
Fixed crash executing undo in some circumstances
Fixed creation of DIMLINEAR entity on a specific drawing
Fixed open of hyperlink associated to an entity using CTRL+Left click
Fixed edit of aligned dimension with bad association osnap point
Restored message to suggest REFEDIT in BEDIT in case of Dynamic blocks
Fixed enable of "New ..." menu items in various EXPLORER dialogs
Fixed LAYERP command after change of layer properties from ribbon toolbar
Fixed display of OLE objects in XREF
[VBA] Fixed crash using method Boolean
Implemented edit of block properties and block attributes inserted in table cell from property palette
Enabled BEDIT of blocks containing ARRAY objects using double click
Fixed center of plot preview when size of paper is larger than A1
Fixed save/load of paper margins, fixed display of paper preview in print dialog
[VBA]Fixed crash adding XRECORD to dictionary
Fixed afterimage zooming in print preview
Fixed center of plot preview using some printers
Fixed paste of cell with different text style
[CUI] Fixed add of workspace via Transfer tab loses toolbars
Fixed object regeneration on the PAN after zoom in the Model or in Layouts
Fixed crash looking for intersections for degenerate polyline
[LISP][VLAX] Strings received from COM+ functions can be invalid
Fixed DIMCONTINUE that works incorrectly
[LISP]Added Variable DefaultFormatForSave (setenv/getenv "DefaultFormatForSave")
Fixed UCS rotation and solid defintion via Command line
Fixed Crash in pasting via clipboard when R14 clipboard format is enabled
Fixed Slow zoom and pan in specific huge drawing file
Changed REFEDITPREVIEW default to 0
Added Support MG4 MrSID images (with 5 bands)
Fixed update of table created with datalink
Fixed default value for MAPCONNECT command
Fixed exception generated when selecting a style index in AIDIMSTYLE that is higher then the number of dim styles in the current drawing
[SDS/IRX] Added buffer size to several string functions to check for buffer overflow
Removed useless information from property palette with MPolygon entities
Fixed Text Frame property not working in the Property Palette
Fixed save of drawing with SDF map
Fixed create of splines using control points and various knot parameterization methods
Added new CVSHOW and CVHIDE commands and modify Properties for splines and NURB surface to turn on/off control point frame and hull respectively
Fixed quick select of text with some special characters
Added map information imported using MAPIMPORT command to property palette
Added BIMOPTIONS command to configure BIM import and attach parameters
Fixed save of modified PC3 file
Fixed custom paper margins from PMP file
Fixed reload of changed paper parameters
Selected first attribute in DDATTE command
Fixed update of property palette erasing selected entities by LISP and changing current layer by LISP
Fixed HATCH using XLINE as boundary
Changed preview of HATCH with HPQUICKPREVIEW variable - OFF -> draw only boundary highlighted - ON -> draw hatch + boundary highlighted
Added Block name to FILTER dialog
Fixed SLOPEAREA command with metric template
Fixed SLOPEBLOCK and SLOPEAREA commands
Fixed "Text" option in DIMRAD or DIMDIA to display dimension value on command line
Fixed restore of OSMODE, DYNMODE variables after 3DFLY or 3DWALK commands
Added message to warn user about perspective change
Fixed ORTHO called from LISP
Fixed VPOINT command in empty drawing
Fixed reaload of modified XREF using baloon
Fixed INSUNITS of saved Block on Disk using block explorer
Fixed CTRL+C to copy text and format of a table cell
Implemented drag and drop for file types managed by IMPORT command, Fixed IMPORT of XLSX file type
Fixed display of ISOLINES on ACIS surfaces imported by ACISIN
Fixed order of entities in selection cicling dialog, selected first entity in list
Updated list of blocks in drawing explorer after RENAME command
Fixed change of Spelling dictionary from the OPTIONS dialog
[PRINT] Fixed printers initialization in case of printer connection problem
Fixed LUPREC issue during BLOCK DEFINITION
Fixed wrong apply of base point modifying GRIP of an array object
Fixed VPOINT command options
Fixed missing keyword in XREF command
[SNAP] Status bar should display correct coordinates when switching between snap points using TAB
Fixed crash in Revit UI update
Fixed crash using explorer
Improved selection of coordinate system: when no coordinates are specified, all coordinate systems are displayed
[.NET] PaletteSet - Custom .NET palette set is filled with built-in Tool Palette window contents
[Tool Palettes] Fixed GreyedOutExpression and HideExpression
Fixed rotation of block inserting block in table cell
Fixed font postion and wrong shape of korean text
Fixed load of DXF file with map entities

Verzija 22.0.12.12 (19. jul 2022.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed display of broken mechanical entities
F12 key didn't change Dynamic Input icon in Status bar
VBA: Changed SendCommand to make it sync with VBA execution. Added SENDCOMMANDSYNC variable to restore previous behaviour
Fixed PUBLISH of multiple DWF files
Fixed polar ARRAY ribbon controls to change angle filled, angle between
Fixed fade of entities outside of refedit set starting REFEDIT command
VBA: Fixed Boolean operation on regions
Fixed print and preview of OLE objects in block in paperspace
Users can now choose if the dragged file onto the drawing area is opened or imported into the current drawing
Now TXTEXP command explodes pre-selected entities
Now BURST command explodes pre-selected entities
Added tooltips for NETWORKSEARCHTIMEOUT in performance Dialog
Improved speed of open of drawing with 3d solid objects
Improved speed of esnap over 3d solids
Fixed enter of multiple point text in table cell
CHANGELOG: Fixed freeze using esnap on big block
Users can now choose if the dragged file onto the drawing area is opened or imported into the current drawing
Now TXTEXP command explodes pre-selected entities
Now BURST command explodes pre-selected entities
Added tooltips for NETWORKSEARCHTIMEOUT in performance Dialog
Improved the messagebox that is displayed after user released tokens in NLM Server Monitor
Improved response of click over tool palette
VSLIDE not hiding background drawing
Fixed pointer behavior in SOLIDEDIT command
Fixed area of hatches
Fixed calculation of hatch area in case of trimmed hatches
Fixed set of columns and rows of rectangular array using dynamic input controls
Fixed ROTATE command with DININPUT,ANGBASE/ANGDIR modified
Fixed grip position of rotated array objects
Fixed Page Setup associated to a Layout Space not visible in Plot dialog
Fixed crash using QDIM command
Fixed change of XCLIP boundary on block pasted in another drawing
Fixed crash in property palette
Fixed EXPORT command when file already exists
Fixed crash with SETTINGS dialog with AECOBJECTS = 0
Fixed regen of xclipped blocks using clip frame grip
Improved DWG file extension association to progeCAD
Fixed crash in image manager drawing images stored on unresponsive file system (NAS)
Reduced size of DXF file removing preview image from file
Fixed pick of first point of MLEADER with ESNAP
Fixed crash closing palette activating a drawing from start page
Fixed grip edit ESNAP now prevails over ORTHO and GRID
Properties height and width of Custom Paper size when plotting PDF with the progeCAD PDF Virtual Printer are limited to 3200 mm (or 126 inches). To achieve higher page sizes use ADDFORMAT
Using command BEDIT on dynamic blocks now tells the user to use REFEDIT command instead
Added zoom option to FIND dialog
Added IGESSTEPEXPORTSCALE variable to options dialog(command IGESSTEPOPTIONS)
Fixed IGESOUT/STEPOUT command to be used from scripts
Fixed color names in the non-English version of the Selection Palette
Slow switching when editing table cells
Fixed message in WIPEOUT command
Added extension DWFX to DWFIN command
Fixed ESNAP center of closed splines
Improved speed to show BEDIT dialog with many blocks
Added dxf format to publish
Fixed LMAN dialog to restore layer settings
Fixed hatch boundary recognition in some drawings
Partially fixed wrong PREVIEW of DIMENSIONS TEXT during COPY>PASTE operation
Fixed set and save of crosshair related colors
Fixed vl-princ-to-string to deny print of source of lisp function
Fixed selection command with lower case letters, in dynamic input list
Fixed CENTERLINE command
Added REVERSE command
Fixed Crash with Zoom Extents
VBA: Fixed VBA area property of hatch
Fixed area calculation in specific hatch

Verzija 22.0.8 (28. mart 2022.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed crash printing PDF with layer
Disabled PDF layer default
Fixed open of drawing with many XREF
Fixed crash opening OPTIONS dialog
Improved PAN performance
Fixed display of missing external reference dialog box
Fixed open of DWF file generated by PRINT command
Stored default path used to print PDF and JPG files
Fixed lisp entmod on 3d solids entity it created corrupted entity
Fixed crash using intersection esnap in a specific drawing
Improved speed of zoom in drawings with many XREF
Fixed MERGE option not working properly when converting a multipage PDF into DWG
Removed lag starting dragging entities in commands MOVE, COPY, etc
Fixed MAIL command
Fixed resize of cancel button in XREF dialog
Fixed field evaluation in attribute of dynamic block
Fixed OFFSET for a complex polyline profile
Fixed localization of date in start page
Added new bigfont files in BIGFONT.INI to improve compatibility with Asian language
Fixed display of korean text using korean bigfont
Fixed offset of face of 3d SOLID using CTRL+click
Fixed display of 3d Solids with ISOLINES = 0
Fixed display of isolines made by splines in 3d solids
Fixed crash using UNDO, REDO on LAYOUT command
Improved OSNAP on 3d Solids
Fixed EXTMAX and EXTMIN variable with MTEXT objects
Fixed display of dimension radius/diameter with lineweight and antialiasing enabled
Placed on top "Custom" paper size in paper list in pdf printer property dialog
Implemented Extend for splines
Added Geographic option to COORDINATE command
Implemented INTERSECT on 3D surface objects
Fixed OFFSET on DONUT object
Fixed intersection between 2 ETRACKs points
Fixed highlight and grips of multiple selected 3d solid faces
Fixed display of 3D solids with one face selected and antialiasing
Fixed crash setting viewport linetype with layer palette
Fixed CONVTOSOLID command
Fixed crash trimming hatch with spline
Fixed grip edit with ORTHO in isometric mode
Fixed BEDIT on block with proxy

Verzija 20.0.6 (16. februar 2021.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed the height of the Find&Replace dialog when the TOP of the program is not aligned with the TOP of the screen
Fixed REFCLOSE in case of editing XREF using REFEDIT
Fixed display of point style in SETTINGS dialog
Fixed delete of unused files in temp and in backup folder
Replaced _CUSTOMIZE with _CUI. Changed command associated with QCUI alias
Fixed set of active view from VIEW dialog, now it doesn't need a double "Set current" to activate it
Fixed PLAN command to disable front and back clipping plane
Fixed open time and anomal memory usage opening drawing with clipped blocks
Fixed transparency of polygon selection window and circle selection window
Fixed z displacement using associative array
Fixed STRETCH command in a drawing with bad mechanical entities
Fixed crash using color combobox in property palette
Added check to avoid crash in FILLET command
Updated library to import various file formats
Fixed PYRAMID command in NWUCS
Fixed set of 3D SOLID color also when a subentity has RGB color
Fixed crash opening a drawing with FIELD in attributes
Fixed set of color when ACIS subentity already has a RGB color
Activated Dynamic UCS for PYRAMID command
Fixed background color of PDF export
Fixed RGB color of acis 3d object
Updated solidworks import library
Added check to avoid crash opening a drawing from start page using mouse wheel
Fixed crash in 3dConnexion module
Fixed insertion point and scale of image inserted using positioning file
Fixed crash on selection
Fixed crash clicking on start page during load of drawing
Implemented BLOCKCACHELIMIT variable
Fixed EasyArch edit scale dialog
Changed value of SAVETHUMBNAIL variable to fix crash saving drawing and enlarged to 512 pixels generated thumbnail size
Fixed priority of commands in command list
Fixed crash copying or moving an entity with wrong dimension association
Partially fixed problem trimming spline entity with another spline
Fixed open of drawing from start page: if drawing has missing xref and user choose to update path of missing xref a regen fails and create an unresponsive state
Fixed command list typing on command line, Fixed localization of alias command list
Fixed double click action on entities placed on locked layer
Disabled ARRAYASSOCIATIVITY with 3DARRAY command
Fixed crash selecting array entities
Changed backup folder to "progeCAD backup drawings". Implemented clear of old backup files using CHECKTEMPFOLDER variable
Added BACKUPOPEN variable to backup drawings in temp folder before open
Improved PDF2CAD command: now it will check input files list before starting the conversion thread
Fixed freeze during REGEN on very high zoom in a drawing with complex linetype
Improved Quick Properties Configuration dialog: - Fixed the way string resources are loaded
Fixed disappear of some entity after REFCLOSE
Improved QRCODE dialog: - added "Help" button - handled click on "Help" button Defined help context for QRCODE dialog
Fixed "Invalid input" error message using ENTER changing scale or angle in HATCH dialog
Implemented automatic search of block selected for REFEDIT also on double click
Fixed selection of right subblock in refedit tree
Fixed 3DCONVERT not loading the correct string resource for an error message
Fixed Selection Palette page creating a wrong filter for Layer Name, Entity Color and Linetype properties. Now it will use the localized name of those properties to create objects filter
Removed isolines with HIDDEN mode to improve speed of regeneration
Fixed crash in PDF2CAD
Added Modeless Progress Indicator loading a drawing
Fixed osnap on zoom window according to OSNAPCOORD
Fixed creation of corrupted HATCH using PREVIEW during HATCHEDIT
.NET API: Changed open file function to get failure from .NET procedure
Improved Main Options dialog: now *Scale* options means "millimeters per DXF unit" Improved Advanced Options dialog: restored *Scale Text* option and moved it to Scaling Options group
Avoided explosion of solid hatches in 2d solid entities using EXPLODE command
Improved performance of EXPLODE command
Fixed selection of dashed entities in empty part of linetype changelog : Fixed selection and ESNAP of dashed entities
Fixed print of Footer or Header when drawing name that cointains ','
Fixed TRIM with rotate view
Implemented selection of last opened file in OPEN dialog
Disabled SELECTIONCYCLING within LISP or SCRIPT commands
Fixed Replace in FIND dialog with MLeader using Block as content type
Fixed FIND command with MLEADER using BLOCK with ATTRIBUTES
Fixed stack corruption problem opening file that uses vertical true type fonts (with '@')
Fixed hang using print preview with PDF printer and custom paper size without customize the size
Fixed save and get of print transparency from layout
Fixed print PDF with transparency (or hidden, shaded) using our PDF printer, added PRINTTILEMODE variable (ON is 2020 mode, OFF is 2021)
Fixed Revit underlay scale after reopen
Fixed speed of selection of 2d Polylines with many vertexes (+10k)
Fixed FLATTEN command with 3d Solids objects
Added message for unsupported Revit file version
Fixed APPLOAD command to load lisp that contains COMMAND
Fixed purge of Dynamic blocks to avoid delete of referenced dynamic blocks
Implemented print of TIFF file using our JPG printer
Fixed selection speed in drawing with too complex hatch, ignored (not regenerated) hatches with more than 5000 loops
Implemented sysvar fields in FIELD command
Reduced size of objects pasted in Word-Excel, Added EMFFACTOR and WMFFACTOR to change size factor of EMF and WMF created during COPYCLIP
Improved PDF2CAD command: now it will display only one message if some of the input files were skipped during Batch conversion
Improved PDF2CAD: handled skipped files Improved "Single File" mode tab: now it will display an error if invalid PDF file is selected Code Cleanup
Disabled thumbnail generation during autosave to increase speed of autosave
Fixed OFFSET with lines standing on different Z levels
Fixed the initial height of the DWG Preview in Open File dialog
Restored vertex grips of non associative hatch created selecting objects
Property palette :Fixed change of number of items and angle between items of polar array if angle is less than 360°
Fixed print of images with a page size larger than A3
Fixed lag after copy of block
Removed "last access" from open/save dialog
Fixed a bug in DATAEXTRACTION dialog when user is unable to move from step "Data Source" to step "Select Objects"
Fixed default option not being recognized by PCAD in a few prompts of the _3DARRAY command
Property paleete: Fixed change of total angle of polar array if angle is less than 360°
Fixed speed of COPY of some specific blocks in a big drawing
Fixed the command bar position in a Multi-Monitor context. Now it appears on the correct monitor at startup time
Fixed temporary OSNAP in ZOOM window command with OSNAPCOORD = 2
Fixed zoom and pan with ZOOMDETAIL = -1
Fixed update of Quick property palette changing color with ribbon or toolbar combobox
Fixed insertion of blocks from tool palette: layer names and other styles coming from inserted blocks are preserved
Print: removed message and popup about 3d hidden/shaded view and plot styles
Fixed EXTRUDE direction option with NWUCS
Fixed ELEVZERO command with REGION objects: the command now filters out REGION objects
Fixed display of main window during application startup
Fixed ESNAP and ETRACK markers in diffent VPORTS : Restored SNAPALLVIEWS to 0
Changed selection windows to display only in active window
Quick Property: added a limit to height max to 750 pixel, added scroolbar when exceed to height limit
Improved speed of command hint list with great number of results
Added OneDrive business path to cloud commands
Fixed load of some commands opening drawing with double click on PC with QUADRO video cards
PDF2CAD : Fixed crash when attempting to show preview of a protected PDF file
Fixed display of DGN underlay
Fixed wrong DIST result on layout Viewport
Implemented dimension scale depending from layout viewport scale
Implemented PURGE of empty text objects
Fixed APPLOAD of .NET modules , filename is not requested twice
Fixed exception finding hatch boundary
Added IMPROVETEXTQLTY variable to HWCONFIG dialog
Fixed delete of unused files in temp and in backup folder, changed number of backup files to 2, changed remove of old backup file controlled by BACKUPOPEN variable
Added check to avoid crash using layout tab during block editor
Fixed explorer preview pane after start
Fixed edit of text of annotative dimension
Fixed activation/deactivation of POLAR and ORTHO passing from one drawing to another
Fixed problem using PUBLISH with our PDF printer, added license activation and set options for each page
Fixed open time and anomal memory usage opening drawing with clipped blocks
Improved speed of regeneration of TTF text
Added IMPROVETEXTQLTY variable to enable or disable change of TEXTQLTY variable opening drawing
Fixed DIMRADIUS command when circle stands on z plane different from current elevation

Verzija 20.0.8 (15. jun 2020.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed color of edges to color of 3d solid entity
Fixed Fit option of MVIEW command
Fixed linetype combo in property palette: removed duplicate of *Varies* linetype
Fixed save as dwg 2004 of drawings with non latin characters in layer or layout names
Fixed crash while copying and pasting special associative dimensions
Fixed dynamic input specifing Z coordinate
Fixed crash when copying unicode text
Fixed crash closing ARTISAN's render dialog
Fixed wrong hatch selection when clicking on an empty pattern in "ANSI", "ISO" and "Other Predefined" tabs in "Hatch Patterns" dialog. Graphically improved the selected pattern by drawing a red border around it
Fixed the CAMERA command that didn't use the CAMERAHEIGHT variable correctly
Fixed crash in layer palette
Fixed crash when executing BEDIT during the session of another BEDIT
Fixed hatch not copying background color using _MATCHPROP command
Made _FIND dialog smaller and now there is the possibility to expand it
Fixed scroll on grid tooltip in property palette
Removed some unsupported ColorBooks
Fixed compound tangent snap to circle specifing second point with angular coordinate (eg: 100<45)
Fixed _TABLE insertion using "specify window" option
Fixed linetype color in "Appearance" column of _EXPLTYPES dialog being always black
Fixed text color in "Font Name" column of _EXPFONTS dialog being always black
Removed useless REGEN after REFCLOSE
Fixed lisp GETENV function to load variable also from registry
Fixed the way TARGET system variable is handled in a few commands of EasyArch
Fixed update of dimension associated with 2d polyline
Added column sorting when clicked on column header in _EATTEDIT dialog
Fixed crash in shape importer
Fixed crash in hatch dialog
Fixed dimensions are modified with print window
Fixed open cad object from excel
Fixed crash at closing time
Fixed usage of font Typo_SsangmunDongStencil.ttf
Fixed display of a specific text using just installed specific fonts
Fixed APPARENT intersection of a 2d line perpendicular to view plane
Fixed DIMBREAK of extension lines of aligned and rotated dimension
Fixed dwg preview not visible in windows' explorer preview pane
Fixed color of some entities in blocks using DISPLAYLIST ON
Added message at end of "Rebuild all" option
Fixed DIMBREAK command to use only selected entities
Fixed linetype of circle created by 2 arcs with OVERKILL command
Fixed TANGENT snap moving line grip and using deferred tangent with dynamic input
Added isolines properties to Swept surface and added other geometry properties disabled due to unsupported operations
Fixed memory exception in ADDFORM dialog
Managed "*" as filter in tool palette "add blocks" feature
Fixed property palette with extruded surface, added other properties to control height and angle of extrusion
Fixed PASTESPEC to create table object using data from Excel
Fixed speed of selection using property palette
Fixed dynamic input with negative value for single edit control
Fixed COPYCLIP in a specific corrupted drawing
Fixed '*' in menu macro to repeat all macro instead only one command
Fixed poor performance opening a drawing or shading
Fixed Drag jig failing for rotation angle when Ortho is On
Added LOADDOTNETWITHQUADRO variable to enable/disable load of .NET with QUADRO video cards
Added "Misc" tab in nlm server monitor Added custom token description management in this tab
Added check to avoid crash using DIMENSION with Intersection esnap
Fixed XREFNOTIFY not handling DWGs with an absolute path but are not there because they are in the same folder as the main dwg
Fixed XREF not being inserted using the "No path" option
Filter selection is not working correctly when changing layout with model space
Fixed -ARRAY command with 360 degree
Fixed FROM using keyboard
Fixed CIRCLE with 1 pt + 2 Tangents to lines
Fixed size of dots in dynamic input in drawings that redefine custom "_Dot" block
Fixed use of expression in dynamic input with single control
Fixed print of long paper size (9000mm) using custom paper size added as form (using ADDFORMAT command or with some: drivers HP DJ T930 V4)
Fixed Snap to 0 length polyline in a block
Fixed save of wrong publish DSD file
Fixed problem of display of objects on OFF layers after LAYISO command
Fixed set of active CTB from plot dialog after run of VBA routine that sets same parameterss

Verzija 20.0.6 (7. novembar 2019.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed fade of refedit
Fixed context menu and prompt menu according to SHORTCUTMENU variable
Fixed substr LISP function with Unicode strings
Fixed DIMCONTINUE on polyline with INTERSECTION esnap
Fixed BOX command with esnap with NWUCS
Fixed export of 3D PDF using EXPORT command
Fixed _ALIASEDIT command not updating the right pane in customize dialog
Fixed display of Full Drawing Path,shown in title bar when option is disabled
Fixed usage of Unicode string from lisp, fixed getmess function and lisp strcat
Fixed STEP import crash
Fixed BOX with dynamic UCS with esnap
Handled Unicode Strings in Filter Dialog
Fixed BOX with 2 esnap points
Fixed APPLOAD command with network path
Removed point on optimized entities during PAN and ZOOM
Fixed Center option of TEXT command from script, added dynamic UCS to interactive part
Fixed creation of box using esnap and starting from elevation
Fixed remove of entities using SHIFT from selection set of STRETCH command
Fixed DIMCONTINUE on polyline with INTERSECTION esnap
Fixed HELIX command
Fixed POLYSOLID justification using a session variable
Fixed selection of HATCH, now PICKSTYLE is controlled during GROUP selection
Fixed arrow keys not moving the editing cursor in dcl edit box
Fixed DCL dialogs positioned incorrectly on multi-display configurations
Fixed BOX command starting a different Z and using Osnap
Fixed search of pcad.pat and pcadiso.pat file to load hatch patterns
Fixed mtext not fully considered in zoom extents
Fixed SWEEP with helix as path
Fixed FILLET with PLINETYPE = 0
Fixed missing option in JOIN command on arc entities
Fixed SLOPEBLOCK command adding a question to remove or not last entity created
Fixed face extrude with negative taper angle
Fixed WEDGE command with Center option
Fixed _STYLE dialog not closing after pressing "ESC" key after having clicked on Apply button
Wrong view in viewport with rotated UCS Disabled FIELD button in text editor
Added another Lock file type (LOCKFILEMODE variable) to allow update of drawings for wider range of cad
Fixed Length option of BOX command
Fixed selection of MLEADER text also when arrow is not present
Fixed hatch in a drawing
Fixed extra trim when Save button is pressed in Edit Table Cell Dialog
Fixed BEDIT inside another BEDIT session
Fixed trim in a specific condition
Fixed BOX command setting height with second point z coordinate
Fixed crash with COPY command in a drawing with constraints
.Net : Implemented Document.Window property and IntelliCAD.Windows.Window class
Fixed save of RASTERPREVIEW variable between sessions
Fixed layer property of FIELD object
Fixed move of linear dimension created selecting a subentity of a block
Fixed deferred tangent of 2 circles using SHIFT+RX click menu to select esnap
Fixed JOIN command of two arcs to create a circle
Fixed display of polyline entities with arc segments with bulge near to zero
Fixed set of center of circle using @ to get last center of previous circle
Updated tolerance in a DynVCT script
Fixed erase of some dimension with bad dimbreak information
Fixed FADE during REFEDIT in some circumstances
Fixed rotate face, removed useless offset
Fixed display of JP2 raster images
Fixed properties of MTEXT display in QSELECT
Improved speed of images during PAN and ZOOM with MTMODE = 3
Lisp: Fixed VLAX-CURVE functions with entity name
Fixed crash with COPYCLIP of a malformed spline
Fixed usage of some TTF fonts not recognized on Win10 ver 1903
Fixed file finder from OPEN/SAVE dialog
Fixed name of page format when changing units in "_ADDFORMAT > new" dialog
Fixed VPCONTROL variable range
Fixed _LOFT command not using graphically closed polylines
Fixed Digital Signature multiple error prompts
Added MS and PS aliases for MSPACE and PSPACE commands
Fixed overridden dimension style in BEDIT session, incremented variable number to copy from source database to BEDIT one
Fixed deadlock with blocks with attribute after BEDIT
Fixed selection of hatch pattern when ansi, iso or predefined tabs are opened
Fixed custom hatch pattern not chosen when tab is opened
Fixed crash trying to hide or show a non-existent toolbar from the command line
Fixed hatch pattern dialog not memorizing custom as last used tab
Fixed scrollbars in hatch pattern tabs
Made hatch pattern automatically being picked when double-clicked
Fixed crash using BEDIT without drawing tab
Fixed display of isolines of a drawing coming from another cad
Fixed QUIT/EXIT command to get parameters from lisp
Fixed creation of block with NWUCS
Fixed REFEDIT adding associated dimensions to blockset
Changed default CROSSINGFRAMECOLOR and WINDOWFRAMECOLOR to white
Fixed "_SETTINGS > Coordinate Input > Entity Selection > PICKADD" checkbox not taking 2 as a option
Expanded special case for WORD/Excel OLE objects
Fixed lisp strlen function on Korean OS with Korean strings
Fixed associativity of dimensions using paperspace viewport
Fixed window print selection adding a page setup from plot dialog
Fixed JOIN of lines and arcs
Fixed substitution of pfb font files
Fixed exception during spline generation of isolines of a 3d solid
Fixed crash during COPYCLIP command, reduced transformation matrix value from 1e+99 to maximum of 1e+16
Fixed step/iges export with colors
Fixed export of entity color in command ACISOUT
Fixed STRETCH command which didn't work on WIPEOUT
Fixed open in read only mode to allow files to be saved by other cad
Updated Insert Block Dialog: - Excluded "External References" as blocks. Fixed typo in Ribbon Manager
Fixed display of text in block with frozen layer
Fixed wrong message when the user doesn't have the read/write permissions in allusersprofile
Fixed program name in few string resources
Crosshair follows the mouse pointer on grips even if ortho is active
Fixed lisp strlen function on Korean OS with Korean strings
Fixed priority of POLAR/ETRACK over standard esnap
Fixed import of ARG files
Fixed TRIM of XLINE with crossing option
Fixed _STYLE dialog not closing pressing the ESC key
Fixed crash with zoom extent in a specific drawing with HWACCELERATION=0
Fixed various crashes with gripedit
Fixed grip rotation according ANGBASE variable
Fixed exception using polar in _DIST command in layout space
Fixed crash using grip in some conditions
Fixed crash at closing time after iges/step import
Fixed crash updating status bar
Fixed crash in Field command
Fixed removal of layers in layers' palette asking every time what to do with the entities on them. Now it's possible to apply the chosen action to every selected layer
Fixed layer count not refreshed when deleting a layer from the palette
Fixed crash using explorer in some circumstances
Improved speed of regen of solids reusing facets

Verzija 20.0.4 (30. jul 2019.)

Nova verzija donosi niz unapređenja i ispravki:

Changed default color of CROSSINGFRAMECOLOR and WINDOWFRAMECOLOR to white
Fixed display of text in block with frozen layer
Fixed crash activating/deactivation GRID in a viewport
Enabled SNAPALLVIEWS variable to avoid crash using ESNAP+POLAR after change to layout, forced to 1 at start time
Fixed PASTEBLOCK with NWUCS, fixed insertion point parameter after changes
Fixed TRIM using edge of text and mtext
Fixed MOVE of dimensions, fixed associated entity extracted from ESNAP
Fixed Center option of CIRCLE command with dynamic input ON
Fixed crash using PUBLISHKML with a peculiar file
Fixed display of selected cutting edge entities after execution trim
Fixed DAEOUT e PRINT3D e STLOUT commands
Fixed crash deleting layers in explorer
Fixed crash in "add vertex" item in hatch grip menu
Fixed crash avoiding exception in dimstyle combo
Added "RAL CLASSIC.acb"
Changed Popup's Type into [Yes/No/Cancel]
Updated BCLOSE command in order to handle options from updated popup: - Yes: Save changes - No: Discard...
Fixed exception in LWeight combo box
Fixed crash changing active dimstyle
Fixed exception using STEPOUT command
Fixed crash getting area of hatch with malformed spline as boundary
Fixed crash with hatch grip context menu
Fixed crash related to DIMLAYER combobox
Removed XREF dependent blocks from BEDIT list
Fixed PASTEBLOCK command with attributes
Fixed stretch of polyline's arc segments on their own starting/ending grips creating a really huge arc
Added ORTHO in PAN when shift is being pressed and orbit sphere is not triggered
Added support for crypted color book acb files, Added new RAL and PANTONE acb files
Fixed PICKADD variable seen as boolean and not as a tristate variable in _OPTIONS > selection tab
Fixed dimension style in BEDIT session
Fixed current styles in BEDIT session
Fixed Keywords List of -COLOR
Fixed _OPTIONS > Clipboard > "AutoCAD 2013 - AutoCAD 2017" check not working
Fixed _COPY taking long time creating EMF and WMF files when zoomed in
Added "Edit" command to Context Menu of Filters Tree in Layer Filter Properties
Removed External Reference from Block list in Insert Block Dialog
Removed External Reference from Block list in Block Dialog
Fixed crash opening a drawing with REVIT underlay
Fixed load of RCP files
Added EXPBLOCKSCLOSE command in order to close Blocks Explorer Palettes
Fixed TDINDWG variable
Removed preview of point cloud in explorer to avoid hang
Reduced GDI objects leaks in EATTEDIT dialog
Reduced GDI objects leaks in Settings Dialog
Reduced GDI objects leaks in 3D Tab in Settings Dialog
Reduced GDI objects leaks in Entity Modification Tab in Settings Dialog
Reduced GDI objects leaks in Entity Creation Tab in Settings Dialog
Fixed height of mtext in property palette
Fixed crash using QSELECT option in SELECT command
Fixed position of cursor clicking in mtext editor
Removed DGN option from _NEW command
Fixed change of color of 3d solids imported by IGESIN/STEPIN
Fixed "Save Pc Info" button in _HWCONFIG dialog not working on windows 7 (removed quotes from output file name)
Fixed import of MNU/MNU files that contains label with "**"
Added ability to disable "automatic numbering" with variable MTEXTDETECTSPACE, Automatic Numbering now is enabled only with '1' or 'a' or 'A'
Fixed display of folder name in open/save dialog
Fixed number of isolines visible on some curved 3d solids in 2d wireframe
Preselected images in IMAGE dialog to reflect active selectionset
Fixed PREFIXSUFFIX command, added vl-load-com to enable vlax function used
Reduced GDI objects leak in SETTINGS command's Dialog: - Handled Property Sheet Icon Resource
Aborted open transactions before save to fix problem of drawing "Saving_with_errors"
Fixed save of drawing after cancel of DWGPROPS command
Reduced GDI memory leaks in TABLEDIT command's Dialog: - Handled Button Icons
Reduced GDI memory leak in HATCH command's dialog: - Improved Pattern Tab
Fixed crash on selection of entities
Fixed _REFEDIT preview dialog having strange Windows 7 alike style
Fixed too long color combobox dropdown length in property palette
Fixed _CENTERLINE > Extension > Amount option not taking enter without modifying the amount
Added "Back" option in _CENTERLINE > Extension
Removed memory leak in Tool Palettes when switching tab
Fixed crash in _EATTEDIT command editing multiline attribute in the list
Fixed QDIM ordinate function with NWUCS
Removed memory leaks in Color Dialog
Added outputfile parameter in pc info button in _HWCONFIG dialog
Fixed "Save PC Info" button in _HWCONFIG dialog not working on windows 7
Fixed Isolate objects left click on status bar
Fixed custom menus having different style in status bar
Fixed Refedit with NWUCS
Made long layer names fit inside the layer combo of property palette
Improved prompt menu's title dimension
Added multicore configuration to HWCONFIG dialog
Removed memory leaks of GDI Objects in Open/Save/New File Dialog
Implemented MULTICORE -3 value to disable 1 core of cpu, added reactor to change it without closing the cad
Fixed speed of creation of entity after autosave of drawing version 2013
Fixed crash closing drawing after edit of associated dimension
Fixed memory leaks in property palette
Fixed use of dynamic blocks in tool palettes
Fixed selection of attribute to edit with double click, fixed NENTSELP and NENTSEL function
Fixed multiline attribute edit, restored old dialog based interface instead of inplace editor
Improved speed of draw of grips, added timeout to display grip menu (GRIPMENUTIMEOUT)
Fixed insert of XREF in DXF file
Fixed availability of various status bar panes
Restored column features in MTEXT editor
Fixed crash in hatch command
Fixed exception using UNDO after REFSET add, it was caused by refedit preview dialog
Fixed vla and vlax functions
Fixed selection of text with MTEXTFIXED > 0
Fixed esnap node in block with Point entity
Improved Stability of Create Linetype Dialog

Verzija 19.0.10 (18. februar 2019.)

Ova verzija donosi niz unapređenja i ispravki:

Fixed crash occurring while creating an alias with empty name
Fixed esnap on degenerated polyline with 0 lenght and with various overlapped vertex
Fixed SINGLETON variable with double click, now SINGLETON variable is taken into account when double clicking on multiple dwg files
Added a message in _SOLIDEDIT command
Fixed import of localized PGP
Fixed wrong polar tracking tooltip when ucs is not world
Excluded file types with multiple extensions from File Find Dialog
Fixed ortho turned off after _DIMORDINATE command
Added again automatic set of mtext's width (if it was equal to 0) but added also a control to set back to 0 the mtext's width if it was not edited
Added some tooltips in IMAGEATTACH Dialog
Fixed HANG editing MTEXT from property palette: avoid double entering in edit function that causes exceptions and wrong resource handle settings
Avoided unhandled exception in property palette moving a MLEADER entityFixed "invalid input" using _MATCHPROP on solid hatches
Fixed leader's last segment's position changing with mtext justification
Fixed not refreshing viewport when a layer inside was freezed or thawed
Fixed "Initial_focus" DCL property, now it manages also text in editbox
Added management of image's drawing units inside _IMAGEATTACH dialog
Fixed print of point clouds switching white from RGB color to color index 7
Added alias for command PURGE
Fixed wrong zoom after "_ZOOM > object" in paper space
Fixed print window in specific drawing
Fixed creation of hatches in drawings with architectural units with dynamic input. Now dynamic input angular text box accepts also other type of units
Fixed _MATCHPROP not applying source hatches' background color to destination hatches
Fixed message box appearing for every selected entity when an invalid input was inserted in the property palette
Fixed freeze/crash caused by INSERT's dialog preview
Handle Properties Group when using Enter to move from one property to the next one
Added ToolTip String Resources for Refedit Preview Dialog
Changed QSAVE behavior. Now QSAVE will always use Default Save Format
Implemented ToolTips for buttons in Refedit Preview Dialog
Fixed properties combos using SELECTIONPREVIEW : removed update of combo when cursor is hover entities with SELECTIONPREVIEW = 3
Handled UNITS system variable in TableStyle
improved CSV import procedure in Create Table Dialog
In the Publish dialog, "Add Drawing" now handles .dxf files
In the Publish dialog, a warning message is displayed before removing all sheets
Minor UI tweaks in Publish dialog
Improved speed of both raster image dialog and save command with many raster images located (or missing) on network path
Fixed move of dimensions that modifies dimension entities
Fixed ENTER on dcl dialog: Implemented "multi_edit_box" tile for multiline. Fixed "accept_value" attribute for "edit_box"
MARKERS command, removed bug in marking with text style with fixed height
Fixed plot dialog losing focus adding new page setup
Fixed change of dimensions moving or copying: changed recompute algorithm to manage text outside of extension lines. Fixed vertical text in several conditions
Fixed TTR circle that wasn't working well when UCS is different from World
Fixed creation of associative dimensions
Fixed _DWFIN command not recognized
Fixed wrong alignment in the preview of gradient hatch in _HATCHEDIT
Added preview of transparency and layer switch during _HATCHEDIT
Fixed not set of layer from _HATCHEDIT dialog
Fixed not set of transparency from _HATCHEDIT dialog
Changed column order in _LMAN (switched lock and freeze columns to be in the same order as in layer palette)

Verzija 19.0.8 (22. oktobar 2018.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed QSelect command that changed current selection line type
Fixed propagate of sheet settings taking settings from basic layout page setup, fixed concatenate of PDF
Fixed redefine block from command line
Fixed crash starting print preview with window and printwindowoptimization
Fixed usage of "_OtherIcon" options in flyout and fixed GDI leaks
Fixed bug in Print Dialog. Now "Number of Copies" will be restored correctly upon returning from Preview Window.
Increased numeric values precision in order to fix a problem with options that use real values (i.e. Circle Radius)
Fixed bug in Print Dialog when changing "Print Area" type with Page Setup set to
Fixed problem with "Add Selected Entity" in "Entity Selection Filter" dialog. Now, dialog will report all available options.
Improved FLATSHOT performance and added progressbar
Fixed crash pressing "DEL" button in some condition
Fixed concatenate of PDF files in PUBLISH: changed to use printer concatenate function and disabled layer
[G] Fixed "Plot to file" flag remain active after one plot to file
Enabled multiple entities selection in case Classic Skype was found.
Changed title of displayed dialogs. Enabled multiple entities selection.
Improved entities selection in "Quick Select" Dialog.
Fixed creation of circle, now it uses CELTSCALE instead of LTSCALE
Added exceptions on double click on excel and word OLE objects
Changed dialog type for "Explore Linetype" entry from Linetype Control in Ribbon.
Improved numeric data management in Create Table Dialog
Fixed forced plotstyle for single page in PUBLISH dialog
Handled direct editing of "Linetype scale" and "Global linetype scale" in Linetype Manager Dialog
Fixed TRIM of solid hatch
Handled ENTER key on Layers List in Layers Dialog.
Handled TAB and ENTER key in Property Palette.
Fixed plot offset and plot style table in PUBLISH command using printer or PDF to our PDF printer
Fixed PUBLISH with pdf printer, now it asks output filename printing on this printer
Fixed rotation of paper using PUBLISH on printers
Fixed GDI leaks loading external toolbars
Improved speed of VBA selectionsets
Changed behavior of "SENDTOSKYPE" command when new Skype version is installed.
Fixed crash selecting objects after load of custom toolbars
Fixed color of edges in hidden line mode in viewports
Fixed print of images according IMAGEFRAME with PRINTWINDOWOPTIMIZATION on
Fixed bug in Property Palette of OLE Object
Fixed polyline width after _break command (also when the polyline's widths are edited from the property palette)
Added ALIASEDIT command
Changed AREA command's output when option ADD or SUBSTRACT is used
Fixed scaling problem in EATTEDIT command's dialog
Fixed print window in assonometric view, removed print window optimization in such case
Implemented multiple items selection in PURGE command's dialog.
Added LAYERSTATE alias for LMAN
Fixed preview of POINTCLOUDATTACH dialog
Fixed PRINTWINDOWOPTIMIZATION with frozen layers on XREF
Changed column order in EXPLAYERS (switched lock and freeze columns to be in the same order as in layer palette)
Managed MEASUREMENT variable in TABLE command dialog
Fixed crash removing entities in REFEDIT session from two different drawings
Improved LISP execution speed
Fixed _PYRAMID command
Fixed previous plot not setting the previous plot type
Fixed imperial units always written as 0.0000" (this happened when a measure had at least 1 foot but no inches [ex: 2'-0.0000" -> 0.0000"])
Added SHIFTMBTNROTATION variable to enable/disable the rotation using shift + middle mouse button
Removed unused option in _EDGE command
Fixed property dialog closing itself changing the property of a dwf/dgn underlay
Made combo box in QSELECT dialog fit the longest name
Fixed _SOLIDEDIT > Face > Taper not working with negative angles
Fixed wrong area on polylines with intersected segments in _AREA command
Fixed not working polar in ellipse command after insertion of second point
Added ACTIVEVPORTBORDERCOLOR variable
Fixed active viewport border color not restored after _VPMIN in model space
Fixed status bar not refreshed switching between viewports in model space
Fixed keyboard shortcuts seen in the toolbar tooltips
Fixed wrong message in LAYISO command
Fixed LAYOFF command ending if nothing is picked
Fixed not seen cyrillic letters in the dropdown list of INSERT command's combo box (changed font from "MS Sans Serif" to "Microsoft sans Serif")
Fixed _DIMOVERRIDE command not using DIMATFIT variable
Fixed _DIMOVERRIDE command not using DIMTMOVE variable
Fixed "append to current selection" option in _QSELECT command
Fixed wrong dimension position property when ucs is not world
Fixed not recognized korean characters in current named filter
Fixed enable/disable of buttons in publish dialog
Fixed commands defined in .NET language
Added _POINTSEXPORT command to export points in xyz or csv files
Moved some functions to different header file to simplify usage on non MFC projects
Fixed registry path to autoload .NET dlls
Added missing .NET examples file
Added missing files to "Icad Managed Wrappers" project
Fixed DWF PUBLISH also from multiple drawings
Fixed prompt menu always changing position on right click
Added check to avoid exception in property palette with wrong polyface objects
Fixed ORTHO using command -PAN
Fixed qsave command with DXF
Allowed space in the "Edit dimension text" option ("Dimension" menu)
Fixed PUBLISH of PDF using page setup using internal engine
Fixed wrong behaviour in -PAN command when UCS is not World
Fixed wrong behaviour in -PAN command when a distance is inserted instead of the second point
Fixed rotation of plot in PUBLISH
Enabled "Preview" button in Pagesetup dialog called from PUBLISH
Fixed visualization on single line of read only variables
Fixed wrong behaviour if not defined destination point in _-PAN command
Fixed lag after pan and zoom in layout, removed regeneration after viewport change
Fixed not working aliases of "dashed" commands on autocomplete on screen
Fixed edit/new page setup to allow to use "Preview" and "specify window" button from page setup dialog
Fixed not working input of snaps separated by the comma in _ESNAP command in not ENG languages
Fixed wrong pdf underlay attachment (caused by wrong name truncation at first "." instead of the last one)
Enlarged toolbar text style and mleader combos and made them as big as the ribbon ones
Enlarged toolbar dimstyle combo and made it as big as the ribbon one
Enlarged toolbar layer combo and made it as big as the ribbon one
Added question to save current sheet list in PUBLISH
Set the maximum number for recent commands from 11 to 20
Add "plot style" properties to PUBLISH dialog and fixed some refresh to update properties after some changes
Changed page setup management in PUBLISH dialog, added "New page setup" and "Edit page setup", changed PAGESETUP command to get object id to edit directly a plot style
Fixed unhandled crash occurred in EATTEXT command when template file didn't exist
Added MODELUCSICONWHITE variable to manage if the usc icon should be white or take axis' colors
Fixed -PDFATTACH, -DWFATTACH, -DGNATTACH commands opening the file dialog even though they are "dashed" commands
Removed force "Portrait"/"Landscape" functions from PUBLISH dialog, Removed "Page size" in PUBLISH options, Fixed priorities of options with PDF
Added PAGE SETUP button to PUBLISH dialog
Enabled multiselection for many operations in PUBLISH dialog
Fixed lost of properties of viewports after zoom, fixed lost of visualStyleId of viewport object caused by recalcview
Added "Plot Style" and "Page Setup" group boxes to publish dialog
Added message on not erasable proxy
Added buttons to PUBLISH dialog to replicate menu features
Fixed crash occurred reading layer filters
Added check to show "Email-activation" button in NLM monitor when the user try to activate tokens without internet connection
Implemented page setup, properties of page in PUBLISH dialog
Fixed _AIDIMFLIPARROW command not taking "Both" as default option when DYNINPUT is off
Fixed crash occurred reading layer filters
Fixed insertion point in BLOCK command with imperial units
Changed design of text background color dialog to make it more clear and intuitive
Added "Edit scale list" to viewport scale combo box which executes _SCALELISTEDIT command
Fixed POLARMODE using EXTRUDE command aborting selection of path
Added "Page Setup" menu item to publish context menu
Added MODELUCSICONSCALE and PAPERUCSICONSCALE variables to manage ucs icon dimension respectively in model space and paper space
Added saved page setup in PUBLISH menu
Added load of linetype of rubberband if it's not present in current drawing. Fixed load of SELCLT linetype from lin file according to MEASUREMENT variable
Fixed duplicated elements in scale list modifying the annotation scale list
Restored ARCTEXT command
Fixed crash to plot or preview a corrupted file
Sorted alphabetically "Standard Paper Sizes" list
Fixed wrong suggested scale value in _SCALE command
Changed design of point cloud color map dialog (removed tabs)
Fixed DWGPROPS command not recognized
Fixed visualization of inverted XCLIP blocks
Fixed inverted XCLIP filter creation
Fixed entities remaining highlighted after zoom or pan when SELECTIONPREVIEW variable was set to 1 or 3
Fixed double click on dynamic block not executing _REFEDIT command
Removed regen after dynamic block grip edit
Fixed edit of aliases, set modified flag to avoid double check changing focus between property values
Fixed set of multi line style
Fixed explode of block during REFEDIT
Fixed not saved DCTMAIN and DCTCUST variables in _SPELL > change Dictionaries...
Fixed DCTMAIN variable not saved in OPTIONS > file/path (saved only the file name and not the whole path)
Disabled by default SNAPALLVIEWS variable (to draw esnaps only on active viewport)
Fixed impossibility to draw caused by snaps outside the viewport in this case
Fixed drawing of helixes on all the views (it worked only on top view)
Fixed wrong message editing an XREF with REFEDIT
Fixed pcad.chm not found clicking on help button in "Add Print Style Table" Dialog
Fixed edit of aliases
Fixed DIMLINEAR with esnap on objects in viewport
Fixed load of icons from an external DLL
Fixed mleader's properties not seen in property palette
Fixed change of color of layer: fixed icon of color changed on click
Fixed impossible to hide some options from status bar such as dyninput, dynucs and isolte objs
Added MULTIMONITORPALETTE variable which when enabled allows the saving of the palettes on secondary monitors
Fixed wrong message and management of PICKADD variable in OPTIONS > Selection tab
Fixed grip and edit of XCLIPPED blocks
Fixed hand cursor staying visible and link not changing color when hovered in about dialog (due to last commit)
Added editing of User Name inside about dialog when an nlm server is used
Fixed not refreshing of property dialog
Fixed ucs icon not hooked as before (after color scheme restore)
Fixed TRIM of specific drawing. Fixed exception in geometric library that creates composite curve with degenerate segments from ortho projection
Added message using REFEDIT on dynamic block
Fixed FLATSHOT to create spline curve from too angled segments
Fixed previous selection remaining on the screen when switching between viewports (also when you exit from a viewport via double click)
Added expression evaluator in distance input (Eg: radius of circle)
Fixed substitutes of TTF fonts using pcad.fmp
Removed useless message about substituting font with same name
Fixed previous selection remaining on the screen when switching between viewports (also in layout space)
Enabled selection area only on active viewport and not for all
Fixed -PLOT command to set plot window area with TARGET variable different from 0,0,0
Added grip menu on hatches defined by edges
Fixed failing return of VlaEnameToObject function
Added management of LAYOUTCREATEVIEWPORT and MAXACTVP system variables in OPTIONS > Printing tab
Fixed double click to edit table on active layoutFixed QSELECT to select only objec

Verzija 19.0.6 (6. jul 2018.)

Nova verzija donosi niz unapređenja i ispravki:

Fixed QSELECT to select only objects on current layout
Fixed table editing and viewport switching bad behaviour in layout space
Fixed double click to edit table on active layout
Added STL mode to import surfaces from step/iges
Fixed IGESSTEP import status bar icon clicking another icon
Fixed linetype scale with print window optimization
Implemented the IGESSTEPCONVERTERMODE variable to set converter mode
Fixed wrong stretch of lines when stretched from arrow grips
Changed IGES/STEP converter to improve speed and reliability
Added check to avoid crash on exit
Fixed FIELD evaluation for MTEXT object
Enlarged the "Drawing settings" button in the options dialog
Fixed print window with images on other layout
Fixed "Contents" field value of TEXT entity
Removed RegenAll changing style from the ribbon combo box because it caused slowness
Fixed keyboard shortcut for snaps in SETTINGS > Coordinate Input > Entity Snaps
Changed resource string from "Fit to screen" to "Fit"
Fixed not saving the value of IGNORESHADEDGE in SETTINGS > 3D Settings > Shading
Fixed FIELD dialog to insert object properties with property name different from display in dialog
Fixed resize of layers palette
Fixed display of images on 4k monitor in IgesStepConverter
Fixed hatch area: added fallback function and improved region area function
Fixed set of visualstyle of selected viewport from property palette

 

Verzija 19.0.4.7 (28. jun 2018.)

Nova verzija donosi niz unapređenja i ispravki:

PERFORMANSE
 
Improved startup time.
Improved performance in drawings with XREFS.
Improved entity snap performance in drawings with underlays.
Improved redraw performance creating and updating drawings with multiple entities.
Improved performance printing large drawings in the model space with windowed print area selection.
The New engine for 3D PDF conversion.
 
KORISNIČKI INTERFEJS
 
Optimization for 4K displays.
Redesigned and rearranged menus.
Edit and Import/Export of Menu, Toolbars, Ribbons, Application Buttons, keyboard shortcuts and aliases from .cui files. Import/Export of aliases from .pgp files. Watch how to load Customized Menus and Alias files
Spaces optimization in the Ribbon menu to improve readability
The New Insert blocks dialog with preview
Pointer colors. The pointer color management allows assigning different colors for the pointer in 2D and 3D views.
Viewport Controls provides a convenient way of changing views and visual styles.
New CUI Editor for easier customization of the User Interface.
AUTOSEZ is a tool for the automatic creation of surface profiles to show surface elevations along a horizontal alignment to represent, for example, road edges or ditches (Topographic Sections - AutoCAD Civil 3D Feature)
SLOPE is a tool for an easy creation of terrain slope lines (ticks) between two edges or for a conversion of polylines into slope-style polylines (Topographic Sections - AutoCAD® Civil 3D Feature)
files files.
Fast triangulation of unordered point clouds. Creation of TIN surfaces from points within point cloud scan files. AUTOSEZ command can be applied to these surfaces. 
Numbered Markers (Bubbles) automatically creates bubbles with sequence numbers or letters
Total Length Measure. Calculation of the total length of selected entities.
a. The Cumulative length is displayed in the properties palette when the user selects some polylines and lines.
b. When the user selects more than one hatch, the Total Area is displayed in the properties palette.
AIDIMFLIPARROW flips the direction of arrowheads on Dimensions.
Plot Margin Customization (Zero Margin). Editing standard paper size margins of plotters/printers. Print over the standard devices margins and cover the entire sheet area.
PointCloud. Color Map. Set color scheme for imported PointClouds
PointCloud. ESNAP Support on Points.   
Sort Data Extraction. Changing the sort order of tables generated by attribute extraction based on Columns.
BetterWMF Integration  solves the problems related to copying and pasting drawings into other software packages like Microsoft Word
dwg file that contains only your selection.
The New SENDTOSKYPE command allows sending a .dwg file with selected entities via Skype.
Advanced Copy&Paste adds an option to enable Copy&Paste of selected entities as CAD data into other applications like Explorer or Chat apps (Telegram etc.). Fast transfer via Chat of a dwg file that contains only your selection.
 
UVOZ/IZVOZ FORMATA
 
IZVOZ:
 
STEP and IGES
Maya .RGT
Wavefront .OBJ
3D Studio file .3DS
LightWave .LWO
IFC (Underlays)
 Attach IFC underlays. The IFC (Industry Foundation Classes) format files include building and construction data.
The IFCPANE command allows opening the Objects categories panel in order to control visibility. Once the .ifc underlay is attached, it is possible to snap to its entities or explode it converting into editable CAD data.
Google Earthfile .KMZ
Improved ESRI Shape (.shp) import. Base Elevation (initial Z value) can be set.
Pointcloud .LAS (as CAD points)
Pointcloud .XYZ (as CAD points)
Stereo Lithography file .STL
Virtual Reality Modeling Languagefile .VRML
 
IZVOZ:
 
STEP and IGES
Wavefront .OBJ
Maya .MA
LightWave .LWO
EXPRESS TOOLS
 
NOVI EXPRESS ALATI
 
GETSEL creates a selection set of objects based on layer and object type filters.
BSCALE scales a block reference relative to its insertion point.
GATTE replaces all values with the same attribute tag name in all selected blocks.
QLATTACH attaches a leader line to an mtext, tolerance or block reference object.
DIMDISASSOCIATE removes associativity from selected dimensions.
PREFIXSUFFIX adds Prefix or Suffix to selected Texts .
 
RAZNA UNAPREĐENJA
 
Previous print area highlight (the Area of drawing used during previous print will be highlighted)
The new interface for External References management (DWG, DGN, DWF, PDF, PointClouds, Images)
The in-place Multiline Text editor now fully supports line spacing, lists, and paragraph justification
The New Filter command with the dialog (‘_FILTER)
Search for files when using the Open command by clicking Tools > Find.
The Publish command with the improved GUI. Now the user can choose to publish his drawings using the PDF Printer driver.
The HATCHTOBACK command moves hatches to the back of the draw order.
More features available in the Quick Access Toolbar
Improved AutoComplete. Smart Search with priority to most frequently used commands, improved readability.
New or Updated : BLIPSIZE, IFCOSNAP, MLEADERSCALE, SELECTSIMILARMODE, SNAPSIZE, UOSNAP DTEXTED, GFANG, GFCLR1, GFCLR2, GFCLRLUM, GFCLRSTATE, GFNAME, GFSHIFT, MDISTYLE, MTEXTED, TEXTED, TEXTEDITMODE, XCLIPFRAME.
 

Verzija 18.0.10.22 (17. april 2018.)

Ispravke i novine u verziji su:

 

Fixed crash on WMF generation when copy to clipboard
Fixed freeze when zooming in OLE image
Fixed GRID restoring view with dialog and CLI
Fixed Layer of MTEXT created by TXT2MTEXT
Fixed wrong grid\'s colors inside VPMAX control
Fixed PICKFIRST variable that looses its status
Fixed GDI leaks in layer palette
Fixed default rotation inserting XREF
Fixed void name in PUBLISH command after autosave
Managed two decimal digits into PDF2CAD configuration file for \"Min Line Width\"
Fixed display of REGION entitiesligned mtext (MTEXT Editor)

Verzija 18.0.10.6 (5. mart 2018.)

Ispravke i novine u verziji su:

 

Fixed not added new text style when created from table style editor
Fixed not working annotative checkbox on new dimension style
Fixed selection when cursor tries to select before text (MTEXT Editor)
Fixed selection of last char in dimension text or other middle aligned mtext (MTEXT Editor)
Removed chance to set width, height, length and scale of pointcloud entities to less or equal to 0
Added "proceed" option in textmask command
Fixed save path when path is over 90 chars
Fixed freeze when zooming in OLE image
Fixed table with exceeding column at the end (importing csv file or using eattext command)
Fixed wrong display for some stairs when in meters (EasyArch3D)
Fixed layouts order in publish command (now it\'s not ordered alphabetically)
Fixed command line version of mapimport command to avoid file selection dialog
Fixed editing of layer state name
Fixed display of Chinese text
Increased HATCH definition from 72 DPI to 600 DPI in EXPORT command
Increased HATCH definition from 72 DPI to 600 DPI in PUBLISH command
Fixed wrong scale switching from mm to inches in ADDFORM command
Fixed FIND with previous selection and blocks
Fixed automatically assigned ByBlock color instead of ByLayer in PLANE and SOLID commands
Fixed toolbar/ribbon not updated when SELECTIONPREVIEW system variable is 1
Fixed JOIN command in several conditions
Fixed refresh of table preview when changing the table style
Added editing of arctexts with the double click
Fixed load of localized commands from .NET dll
Fixed AREA and TRIM of hatches in some condition
Fixed wrong conversion between millimeters and inches in ADDFORMS command
Implemented selection of entities for WMFOUT command
Fixed transparent background for EMF and WMF according to WMFBKGCOLOR variable, increased resolution up to 10x to improve curved entities
Fixed bad value order into "AREA" command results
Fixed missing image drawing units in the image details (before the insertion of the image)
Added checkbox for ZOOMWHEEL system variable in OPTIONS > CROSSHAIRS
Fixed "DWG Wizard" not displayed on _NEW command when STARTUP variable is ON
Fixed issue that was causing the lost of the selection before _QDIM command
Added "Don\'t show anymore" checkbox in the message that appears when print configuration is not found and replaced with the default one
Fixed reset option in _-SCALELISTEDIT command
Fixed wrong setting of image scale from property dialog
Changed the minimum dimension of paper margins in ADDFORM from 0 to 6mm (which is the tolerance applied later)
Fixed the reset of arctext color when the edit dialog was opened
Fixed not enabling rename, delete and modify buttons in "Multiline Style" dialog
Fixed table border color applied only to table\'s last grid line and not to every cell
Fixed some issue moving palettes in multi monitor configurations
Fixed problem editing values in DIMSTYLE dialog when LUPREC system variable is set to 0
Fixed not working single line quote when upper and lower deviation tolerances are equal. Enabled "Display print styles" by default in print dialog
Added a message that alerts the user that by removing all DWG checks copyFrom/paste function may not work
Fixed duplication of the grid and duplicated count of "All(X)" items in property dialog

Verzija 18.0.8.42 (15. januar 2018.)

Ispravke i novine u verziji su:

 

Fixed XLINES regeneration issues
Fixed dynamic input after popup menu
Disabled textbox when “no limit” is checked and changed the minimum accepted value from 1 to 2 in qleader settings dialog
Fixed automatic text override after dimension command
Fixed invisible text after dimension command
Fixed origin point not inherited from other hatches
Fixed loss of hatch gradient on TRIM command
Fixed loss of hatch transparency on TRIM command
Fixed duplicates of “*VARIES*” text in property dialog
Fixed sds_getcolordialogtruecolor function to return RGB values of selected color
Fixed MTEXT line spacing increased every time you edit it (when annotation scale is activated and different from 1:1)Fixed qleader text\’s color not being taken from dimclrt sys variable but layer\’s color
Made “show menu grips” checkbox in the options equal to the one in settings
Applied background color to the mtext editor when it is modified
Made “Display print styles” checkbox not visible print dialog
Enabled “Display print styles” checkbox by default in page setup dialog
Fixed not enabling rename, delete and modify buttons in “Multiline Style” dialog
Enabled the preview in “Multiline Style” dialog
Set the number of columns and rows of a table as constants (when you insert a new table)
Fixed table border color applied only to table\’s last grid line and not to every cell
Changed the dimension of “Edit Lineweights” dialog
Fixed change of table style from property mask
Fixed problem editing values in DIMSTYLE dialog when LUPREC system variable is set to 0
Removed possibility to delete layers from xrefs
Fixed qleader text oriented only on top view
Fixed not showing traced lines when typing text in QLEADER command
Solved not inserted QLEADER on left and right view
Fixed wrong DIMCONTINUE after DIMALIGNED
Fixed not working single line quote when upper and lower deviation tolerances are equal
Enabled “Display print styles” by default in print dialog
Added a message that alerts the user that by removing all DWG checks copyFrom/paste function may not work
Fixed duplication of the grid and duplicated count of “All(X)” items in property dialog
Fixed wrong thickness on MATCHPROP on single segment polyline
Changed standard drawing files “label” during open and added all supported files option
Fixed disabling of AutoCAPS when SHIFT is pressed and AutoCAPS is on during MTEXT
Fixed problem calculating intersection with non world UCS

Verzija 18.0.6.11 (5. oktobar 2017.)

Ispravke i novine u verziji su:

Added zero margins prints
Implemented Object properties evaluation, now it’s possible to create FIELDs compatible with Autocad and evaluate properties
Implemented MLEADER,MLEADEREDIT, MLEADERALIGN, MLEADERCOLLECT commands
Fixed Display grips of clipped block references with XCLIPFRAME variable off
Fixed preview during drag of XREF
Fixed Block wrong move after REFEDIT
Fixed DIST command issue with rotated UCS
Implemented hatch stretch and grip edit for hatches created selecting entities
Fixed display of XREF after a cancel of REFEDIT command
Fixed QSELECT dialog in some drawings
Fixed TRIM with SHIFT and EXTEND with ENTER
Fixed freeze selecting polylines and hatches, new method to calculate area of a polyline
Fixed crash trimming HATCH
Removed “Reset” button in customize dialog
Fixed display of entities on locked layers
Fixed select of ESNAP from SHIFT+RCLICK menu using keyboard shortcut
Fixed selection of items in option list of dynamic input
Fixed REFEDIT > DISCARD some blocks are deleted
Fixed Text entering is under images
Fixed join of colinear segments
Fixed insert of XREF without path
Fixed undo of changes to 3D solid properties from palette
Fixed dimstyle and textstyle combo in toolbar and in property palette
Fixed crash while closing with multiple drawing
Fixed error when breaking walls on EasyArch
Fixed DIMLINEAR – “Invalid input” when trying to insert Mtext/Text after DIMLINEAR->Horizontal and DIMLINEAR->Vertical by passing the correct state parameters
Fixed exception using dynamic block grips and fixed restore of ORTHOMODE using grips
Fixed exception in REFCLOSE command makes impossible to continue to work
Fixed lag and slowdown creating objects, with selection window and other operations when some other process uses CPU heavly ( > 90%)
Restored FILEDIALOGS variable to control choose file dialog with every file extension
Fixed exception with REFEDIT on block containing dynamic block
Fixed import button in SCALELISTEDIT dialog called from status bar
Fixed autocomplete dialog layout
Fixed drag of blocks with dragdetail > 0
Fixed drag of objects during MOVE,COPY, SCALE, etc … with great coordinates
Fixed evaluation of field “ObjectName”
Fixed crash opening drawing with fields
Fixed height of toolbar using “classic” UI on 4k monitors
Fixed size of icons in layer palette with 4k display
Fixed size of layer Icons with 4k monitor
Fixed locked layer selection in commands (MOVE, COPY, etc) after changes to TRIM on block
Fixed FILLET between XLINE
Fixed crash at close time
Fixed selection of clipped viewport with its polyline
Fixed selection of viewport in layout
Disabled QLEader attachment options when “Underlay” is checked
Fixed trim of circle or arc with rectangle as boundary
Fixed TRIM and EXTEND with blocks selecting with window
Fixed area of hatches with simple island
Fixed Czech capital letters in command line
Fixed lag after edit commands (eg: DELETE, TRIM)
Avoid crash when superhatch cannot detect intersections in boundary detection
Removed XREF dependent layer from DIMLAYER combo in dimstyle dialog and in ribbon/toolbar
Filtered XREF dependent layer in layer combo in HATCH dialog
Removed background white rectangle from print
Fixed area in properties and list for polyline and 2dPolyline objects
Improved performance of copy large amount of objects
Fixed a crash when insert a door/window with no wall (using EasyArch)
Fixed selection with PREVIOUS option
Fixed selection of source object in MATCHPROP command
Fixed HATCH area calculation using region method
Fixed performance of DIMSTYLE dialog with many Dimension styles in quite large drawing
Implemented selection of entities on locked layer
Resized linetype, lineweight and color ribbon combobox
Improved performance of REFCLOSE with refedit preview
Added symbol menu in context menu for single line text edit
Fixed cone radius, height and center z into property palette
Hidden some fields from list in “FIELD” dialog
Fixed crash opening drawing with clipped XREF
Fixed slow selection in drawing with clipped xref
Fixed selection of block reference with window selection mode
Fixed crash saving modify to a xref using REFEDIT
Fixed visualization of faded objects (placed on locked layer, XREF or during refedit), on some drawings such entities disappear
Fixed text not aligned in the middle in QLEADER command
Fixed MTEXT option that didn’t start the MTEXT command in QLEADER command
Added Rename and Delete buttons in WSSETTINGS dialog to rename and delete workspaces

Verzija 18.0.4.6 (14. jul 2017.)

Ispravke i novine u verziji su:

Added support to open Autocad 2018 files
Improved speed of draw of entities in large drawings (>5MB)
Improved speed of regen of 3d solid entities in shaded/hidden mode
Fixed ESNAP with layer OFF, now objects on OFF layer are ignored
Fixed print of PDF file with layer name containing round brackets
Improved print performance with pdf printer and layer enabled
Added checkbox to enable/disable layer in pdf printer
Fixed intersection esnap between polylines with some objects in draworder table
Fixed display and print of OLE objects in blocks
Improved speed of automatic Regen of OLE, Images, Xray objects
Improved speed of Highlight and selection of entities
Improved selection performance: improved update of style comboboxes
Improved selection performance: Improved update of viewport scale and HPLayer combo box
Improved selection performance: Improved speed of update of textstyle and dimstyle combo boxes
Improved object modified reactor to improve MOVE, COPY speed
Fixed SELECTIONPREVIEW with PAN and ZOOM
Fixed creation of dimension using esnap on overlapped entities
Fixed solid grip dragging with face having negative normal
Disabled REFEDITPREVIEW by default
Added check to avoid crash in layerwalk
Improved print of PDF in case of layer disabled
Fixed face grip edit for compatibility with AutoCAD 2018
Added check to avoid exception in viewport scale combo
Start “PEDIT” on double click on 3D Polylines instead of “PROPERTIES”
Added advanced render uninstall request at uninstall time
Improved layer palette
Make layer list font 1px bigger
Improved layout and colors
Fixed click of editbox into list to allow the click and related features
Fixed dragging/editing
Fixed selection of font drawing an MTEXT
Fixed crash with angular dimension of polyline
Fixed crash using font substitution dialog
Fixed save of HPLINETYPE variable
Fixed key tip for application button
Fixed size of print stamp
Added message starting POINTCLOUDATTACH command
Added ETRACKPRIORITY variable and relative tooltips to the settings in “Coordinate Input” tab (Entity Snaps) and in “Dynamic Input” tab
Fixed COPYCLIP and PASTECLIP of corrupted ACIS solids with bad materials assigned to subentities
Improved SELECT ALL performance to do a single highlight
Fixed architectural units in Korean command line, fixed when options contains ‘()’ for capital letters
Fixed dynamic input with imperial units without specifing ‘”‘
Fixed SWEEP command in some cases
Fixed draw of BOX with NWUCS
Improved switch between drawings, removed useless resize of non active view
Fixed printing JPG using pc3 of our jpeg printer
Fixed SELECTIONPREVIEW with dynamic input on
Fixed priority of dynamic input over polar tracking, Added ETRACKPRIORITY variable to set priority of ETRACK over dynamic Input
Added font support in copy and paste from Excel
Switched Center mark, center cross icons
Changed icon into profile export mask
Added “Center mark with settings” to the ribbon
Fixed error in placing Label for EasyArch
Fixed imperial units in text height combo
Leader changes moving all drawing
Fixed command line options with ‘()’ for far-east languages, Fixed underlined part
Added single selection mode to JOIN command
Fixed Command line message crating a new profile
Fixed crash in OVERKILL command with dynamic input
Fixed JOIN command to join lines in different directions, removed source line on success
Removed grips and selection from deactivating document
Fixed crash in MOCORO with unsupported objects
Fixed exception in sds_getkword function with Dynamic Input
Fixed EXIT command after undo of REFEDIT session
Enlarged some combo in Dynamic Input tooltips configuration dialog
Changed the default colors (for LAZ files without RGB data) when importing a laz pointcloud file

Verzija 16.0.10.23 (21. januar 2016.)

Ispravke i novine u verziji su:

Updated ALL Amyuni driver files to 5.0.1.9
Fixed print and preview of images
Disabled resize of edit dimension style dialog
Fixed LISP vlax-ename->vla-object and (vla-get-activedocument (vlax-get-acad-object))
Fixed FROM esnap with NWUCS
Fixed “Autor” in dwgprops command
Fixed a probably NLM thread gosthing with Windows 10
Fixed creation of spline from VBA
Fixed elevation of hatches in NWUCS
Fixed stack/unstack selecting last characters in mtext editor
Fixed entity type used by vba for ExternalReference and added Path property to Block object
Fixed update of dimensions changing scale factor
Fixed HATCH command selecting 2D polyline as boundary
Fixed MTEXT dialog context menu to enable Stack/Unstack menu item also with ~ # ^
Fixed VBA IsXref function
Fixed edit of hatch with USER defined style
Changed HPANNOTATIVE default value to 0
Added set of FONTALT variable with Far East languages
Fixed print with TTC fonts (like mingliu.ttc)
Fixed command DIST in layout if don’t pick point by esnap
Updated OneDrive detection
Fixed use of right click and osnap PER/TAN when dynamic input is active
Fixed FROM with dynamic Input
Added Autocad LT and ProA clipboard formats
Implemented “Embed TTF” and “TTF text as geometry” in PUBLISH
Fixed first time use of ETRANSMIT
Fixed display of additional file in etransmit dialog
Changed “Insert” to “Block Reference” in QSelect dialog
Fixed East Asian characters input
Fixed etrack with Direct distance entering without dynamic input, now pcad takes distance from active tracking point
Added check to avoid crash in property palette
Fixed huge memory usage in FULLRENDER command
Fixed update of viewport scale combobox and update of viewport selected moving focus from combo
Added question to append or substitute menu, toolbars and aliases
Fixed selection after ACIS load fix

Verzija 16.0.8.17 (07. avgust 2015.)

Ispravke i novine u verziji su:

This version has some fixes some issues with Windows 10 such as: icad.exe remains in process after close of progeCAD reactivation of PDF/JPEG printer, after Windows 10 update some client lost the activation

Verzija 16.0.8.14 (27. jul 2015.)

Ispravke i novine u verziji su:

In this release, there are few fixes from previous release which resulted in few crashes

Verzija 16.0.8.7 (16. jun 2015.)

 

Ispravke i novine u verziji su:

Fixed POLAR on ROTATE command after reference option
Fixed problem with redrawing
Fixed ESNAP on ACIS objects in blocks
Fixed crash with esnap on ACIS
Fixed UNDO after SHIFT to enable ortho
Fixed crash that may occur saving state of toolbars while closing progeCAD
Fixed bug reading PRG files
Fixed -HATCH with NWUCS
Fixed input linker option for QSelect project
Fixed dynamic block name and added length filter for some entities
Improved some specific commands during multiple lisp command
Improved speed of multiple lisp command with dynamic input ON
Fixed AREA command with architectural units (exchanged inches with feet)
Fixed Area prompt for architectural units
Fixed enable/disable of menu using variable
Added layer state to layer combo
Updated a few EasyArch objects to fix some measurement errors
Fixed update of layer dialog when is opened but collapsed
Fixed IcEditorReactor to send lispEnded on top level lisp command
Removed message on DIMENSION command during LISP or SCRIPT
PDF 3D: Tuned tessellation to 25 instead of 0, to reduce the PDF size
Removed message on JOIN command during LISP or SCRIPT
Disabled property palette and layer palette refresh during lisp or command to increase speed of LISP execution
Fixed crash during layer list reload operation
Dynamic Input: Improved speed of lisp procedures with many commands
Removed message on LINETYPE command during LISP or SCRIPT
Fixed clear of excessive layer filter, improved filter load, avoided load of layer data when layer palette is closed
Fixed Unload of raster images to unlock file
Fixed load of ACIS from other cad drawing
Fixed EXPORTPDF to show only PDF format in file dialog
Dynamic Input: Fixed EXPORT options and prompt string
Added check in layer palette and variable USELAYERFILTER to enable/disable layer filter in layer combo box
Added set of current FILTER in layer dialog
Added FILTER to layer combo
Fixed SWEEP command sent using lisp and selecting entities using lisp variable
Added 3dFace to SOLPROF
Fixed surface in FLATSHOT/SOLPROF
Fixed crash closing progeCAD
Dynamic Input: Added check to avoid prompt window in script or lisp
Fixed SWEEP after UNDO
Fixed POLAR with DynamicInput and NWUCS
Fixed imperial units distance that contains spaces
Added dialog to FLATSHOT
Fixed lost of width of columns in layer dialog changing document or active space. Added save and load of columns width between sessions
Improved load of extruded ACIS (fixed only if they come from progeCAD)
Improved command hint manager for not existent commands
Fixed ROTATE3D X/Y/Z options in NWUCS
Fixed command hint edit to starts a command quickly. Added AUTOCOMPLETEDELAY variable to change delay of list showdown
Fixed WEDGE length option in NWUCS
Fixed BOX with negative length width and height
Fixed MIRROR3D in NWUCS
Added support of some visual styles to property palette
Implemented SHADEDGE variable drawing ACIS in Shaded mode
Fixed SHADE and HIDE command to set also correct visual style
Fixed ZOOM extent with only one point entity in drawing
Fixed mirror of hatches
Fixed creation of layer group filters
Added context menu to DYNUCS status bar panel

Verzija 16.0.6.6 (23. april 2015.)

 

Ispravke i novine u verziji su:

Fixed COPYCLIP between progeCAD and other software products
Fixed EXTRUDE of not closed polylines but with equal end and start points
Dynamic Input: Fixed SPACEBAR to change grip function
Layer Manager: Fixed creation of layer group filters
Removed wrong ortho glyph used with ETRACK on NWUCS
Dynamic Input: Fixed not allowed chars
Annotative Dimension: Added regeneration of annotative dimensions to avoid disappearance
Fixed BOX command starting from not 0 Z
Fixed update of angle with rotation in Z axis in VIEWCTL dialog
Fixed ROTATE3D X/Y/Z options in NWUCS
Fixed CONE/CYILINDER specify radius with Z point
Fixed creation of BOX by length in NWUCS
Fixed command WEDGE length option
Dynamic UCS: Fixed exception in some cases
Disabled OSMODE for command LOFT
Annotative blocks: Fixed assign of annotative scale after SAVE and re-OPEN
Annotative blocks: Added BLOCKSCACHE variable to disable cache of blocks
Annotative blocks: Fixed BLOCKSCACHE change removing automatic reload of current drawing to avoid hang
Annotative blocks: Added check to annotative blocks changing active annotative scale, if found pcad asks the user to disable blocks cache and reload drawing
Added check to avoid useless and slow set of pdf printer margin
Fixed JPEG printer
Fixed LOFT command. Now it accepts parameters from LISP
Fixed crash/exception saving (also autosave) drawing with thumbnail
Fixed save of last used path to allow to set it by external IRX
Fixed lisp PRINT and PRIN1 with “\\”
Fixed FILLET command of a closed polyline
Fixed FLATSHOT and implemented dragging of created blocks
Fixed error when autosaving a 2013 drawing
Dynamic Input: Fixed CONE, SPHERE, CYLINDER commands typing diameter instead of radius
Added new contextual menu items for viewports. “Viewport Clip”, “Display Viewport Objects” and “Display Locked”.
Command VPORTS : Fixed ON/OFF for option Lock
Fixed ESNAP on ACIS with NWUCS
Dynamic UCS: Added dynamic UCS to CONE command and direction of extrusion
Dynamic UCS: Added Dynamic Ucs to WEDGE command
Dynamic Input: Fixed NNx and NNxp annotation in ZOOM command
Fixed extrude command with mouse direction and esnap
Fixed a wrong option in the ucs menu
TBSIZE variable set to readonly
QLEADER position error (with modified ucs)
Fixed specify of height of CILYNDER depending from mouse direction, ESNAP or ORTHO 3d
Fixed specify of height of BOX depending from mouse direction, ESNAP or ORTHO 3d
Dynamic UCS: Fixed Cylinder command with dynamic UCS
Changed the saving version parameter for command line
Fixed freeze with files with OLE objects
Removed colon at the end of EasyArch object’s attributes in the edit object mask
Cloud: Fixed save to cloud without fonts
Fixed INSERT command setting angle with keyboard and POLAR
Fixed Missing Arc Aligned Text label in QSelect
Fixed ROTATE command setting angle with keyboard and POLAR
Added some check to avoid exception in NCOPY
Fixed DWGPREFIX and DWGNAME variable for files in 2013 format
Dynamic Input: Fixed dimension pointed lines scale in imperial/metrics drawing
Dynamic Input: Fixed height of text in dynamic dimension in drawing if current text style has fixed height
Dynamic Input: Fixed FLATTEN prompt for options
Dynamic Input: Moved dynamic controls away from cursor position
Dynamic Input: Fixed prompt text of command TEXTMASK and MOCORO and various messages in express
Dynamic Input: Fixed display of unselected text in dynamic control
Dynamic Input: Fixed draw of caret in active edit control
Fixed Hatch of dynamic blocks
Fixed BREAKLINE command in NWUCS
Dynamic Input: Fixed PAN and ZOOM during selection in localized version
Dynamic Input: Fixed cursor on mandatory option list after select (PEDIT, IMAGECLIP,…)
Removed grips from solid face perpendicular to view direction
Fixed position of tooltip of ESNAP/ETRACK/POLAR
Dynamic Input: Fixed RAY and XLINE input
Dynamic Input: Fixed reset of value in GetString mode
Dynamic UCS: Fixed dynamic UCS during RTPAN/RTZOOM
Fixed the “File” menu when closed all documents
Dynamic Input: Fixed display of dynamic input controls after RTPAN in REVCLOUD command
Dynamic Input: Fixed display of selection set coordinate controls after RTPAN
Dynamic Input: Fixed options in RASTER commands
Dynamic Input: Fixed update of controls and dimensions using only keyboard

Verzija 14.0.10.14 (28. oktobar 2014.)

 

Ispravke i novine u verziji su:

Fixed: MTEXT format gets corrupted after editing
Fixed: Ortho is not working when select an entity
Fixed: Extrude error – Wrong EXTRUSION by path
Fixed: sds_getpoint is not showing message for invalid input
Fixed: MENU path is not deleted from search paths
Fixed: Paper size is reset when printer is not found
Fixed: Crash during switching layouts
Fixed: FILLET creates bad fillet when FILLETRAD is greater than possible arc’s radius
Fixed: No preview while creating a spline
Fixed: FLATTEN command missing output
Fixed: Crash on exit after some operations with Drawing Explorer
Fixed print and preview of “\U+XXXX” unicode texts
Fixed DIMORDINATE with INTERSECTION snap
Fixed ARTGR + E for Euro symbol in mtext dialog
Fixed etrack with additional angle setting
Updated pdf2cad
Fixed check of large double number
Fixed problem saving in R13 version
Added color button to snap aperture panel
Added button to open explorer in printer styles window
Disabled ESNAP with SNAPGRIDLEGACY set to ON without active command
Fixed DELOBJ variable with SWEEP command
Fixed sweep object after regen
Fixed crash with esnap on ACIS
Fixed REVOLVE command to remove selected objects (path and revolved objects)
Fixed DIST in PSPACE viewport clicking on polyline
Fixed eattext dialog with languages different from eng
Fixed exception moving sphere with grip with SOLIDGRIPS ON
Fixed GRIP with NWUCS
Fixed right click and ENTER to terminate grip edit
Added CTRL to copy entity using grip
Added multiline mode
Fixed HATCH dialog, now it reloads custom and user defined patterns
Selected by default the default Profile
Disabled export button for default profile
Fixed load of pc3 settings, use paper size from dialog and B/W vs color
Fixed drawing open with nested xref
Fixed: When dragging line/polyline vertices by grips, elevation is reset to current ELEVATION value
Fixed: Toolbars rearranged wrong when there are empty spaces between them
Fixed print unexpected error: DirectoryFull
Changed default of SOLIDGRIPS to 1
Restored _GOTOFAQ command
Fixed ORTHO in Z direction
Fixed WEDGE command with ORTHO ON
Fixed crash changing main dictionary in SPELL dialog
Fixed insert table from CSV comma separated
Added all dictionary to installation folder and set default dictionary
Fixed order layers color
Enabled _EDITLEN Icons
Fixed linetype combo box
Fixed EXPLODE command for polyline and nested blocks
Fixed command line HATCH command to select entities from floodfill algorithm
Fixed speed of hatch algorithm
Fixed lost of focus for command hint list
Fixed open of read-only DXF files version 2013
Fixed problems with zooming out when one of the viewports in Layout is very small
Fixed wrong extrusion following a path
Fixed: If a line is drawn after Zoom-In to the limit, then the line disappears.
Fixed: Inverted RGB colors during the PDF EXPORTATION
Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
Fixed: Setting “Recent drawing list size” (NFILELIST) to 0 leads to ICAD crash on drawing opening
Fixed: Fixed hatch boundary algorithm with overlapped edges
Fixed context menu with old menus read from registry
Fixed EasyArch stair construction bug when changing to meter units
Fixed color string in General property panel
Added support to the Large Buttons
Added 3D Box properties to property palette (only reading of geometric values from object, cannot modify yet)
Fixed wrong sentence in table properties
Added CTRL+A to layer property palette
Fixed Table creation dialog to store and reuse data
Fixed edit using 3D solid grips and improved performances
Fixed LOFT command removing “construction” solids
Implemented PDF/A for PDF printer
Fixed QLEADER removing “flash” at 0,0 starting jig
Fixed mtext option in QLEADER command
Fixed Alignment of MTEXT in QLEADER command
Added support to Multiline attribute in EATTEDIT dialog
Added icedEditMTextInteractive to IRX
Fixed crash in BATTMAN dialog changing TAG of attribute definition
Fixed stretch of Hatches to maintain associate objects
Reset previous selection starting STRETCH
Fixed STRETCH command with HATCH
Added option to preserve thickness values into DOCFAEXPORT command
Fixed memory loading accelerators
Fixed EXPLODE during refedit session
Fixed DIMCONTINUE command on paper space viewports
Implemented frame around text of QLEADER
Enabled scrollbars during dragging operations (LINE, MOVE, COPY etc…)
Fixed some texts in crashreport dialog
Fixed boundary finding procedure with overlapped edges
Improved hatch area algorithm with non visible boundaries, removed UCSICON and GRID enable and disable
Fixed hatch boundary algorithm to find the right way to close a path
Fixed QSELECT with custom objects
Fixed bug footer constrain
Fixed many errors with a VBA that opens and closes multiple drawings
Fixed area of hatches and added Area property in VB
Fixed Hatch with blocks and strange geometrics problem to decide if a point is outside a polygon
Fixed COPYM command with ACIS objects
Fixed COPYM with measure option
Added vl-load-com lisp function
Fixed crash that occurs while loading user folder with specific drawings
Fixed ACIS solid corruption after closing and re-opening a drawing
Fixed TRIM command for 2D and 3D polyline
Fixed print preview. In some circumstances, vectorization was failing and some items were not visible
Fixed erroneous random generation of icadplot.log file
Fixed zoom extension issue with splines having overlapping points
Fixed custom icon that was causing error messages
Added some controls to palette features to avoid crashes
Fixed occasional crashes while opening some files
Fixed polyface mesh that were not displayed

Verzija 14.0.8.19 (9. jul 2014.)

 

Ispravke i novine u verziji su:

Few major fixes of handling some specific DWG files

Verzija 14.0.8.13 (2. jun 2014.)

 

Ispravke i novine u verziji su:

Implemented new BATTMAN dialog

Added start up dialog
Changed ETRACKDELAY to 200 ms
Fixed erroneous behavior after resuming the PC from a sleep state
Fixed crash displaying some tiff on windows XP
Changed default for OSMODE and AUTOSNAP to enable POLAR, ETRACK and esnaps INT,END,CEN
Fixed COPYFULLPATH command to empty all other clipboard data
Fixed open of DXF files version 2013
Fixed changes of ALIAS with command hint list
Fixed ‘vlax-ename->vla-object’ for spline and leader objects
Fixed RGB inversion – Inverted RGB colors in during the PDF EXPORTATION
Fixed palette set in B/W images
Fixed BLOCK dialog with block names with ‘,’
Improved speed of layer palette changing layer’s properties
Improved LAYERP logger procedure to avoid save and delete of temporary layer state
Disabled ExportPDF3D command when no drawing is opened. Disabled DwgProps command when no drawing is opened
Fixed exception in LMAN with specific drawing
Fixed DATE variable now returns local time
Fixed PUBLISH with spline objects
Removed main viewport from selection set selected by QSELECT to avoid problem in case of erase
Fixed dcl crash with (mode_tile “xxx” 2) before (start_dialog)
Fixed PDF2CAD without open drawings
Fixed update of linetype combobox
Fixed crash while moving entities in a specific drawing
Fixed: VBA – Block.AddItems() should not change block origin to (0,0,0)
Fixed: Center snap is incorrect for some entities if elevation is different from zero
Fixed: OSNAP does not work on PDF underlay
Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
Fixed: Cannot set Window Print Area when Command Bar is floating
Fixed: ZOOM Extents zooming incorrect on blocks with more than 59 entities
Fixed: Tollbars position is not stored properly
Fixed Crash on startup
Fixed dwgname in DWGPROPS dialog, tab tooltip and OPENFOLDER command for dwg with 2013 format
Fixed bad memory release with monochrome images
Removed error messagebox during creation of toolbars and replaced with log
Changed DRAGDETAIL variable to 0 to fix problem of dragging (MOVE,ROTATE) of objects at large coordinates
Improved EXTRUDE and REVOLVE command with multiple select
Added unknown object types to QSELECT dialog
Fixed stretch to move hatch
Fixed creation of new menu items from customize dialog
Fixed height of text pasted from LibreOffice/OpenOffice tables
Added DEL button to remove layout from PUBLISH dialog
Fixed import of plot settings using PUBLISH, now it displays also inches unit
Added more items to tab context menu and implemented missing commands
Fixed localization of EXPRESS module
Fixed Red and Blue inversion in PUBLISH of PDF
Fixed PUBLISH of bitonal images
Fixed Extrude command: enabled multiple selection
Edited profile editor option dialog, changed default profile enable/disable buttons
Added reset all profiles button. Removed multi-line selection
Added check to avoid crash for buffer overrun
Added check to avoid crash from layer palette
Reduced size of pdf produced by PUBLISH with great images or clipped ones
Reenabled GDAL to manage TIFF to insert GEOTIFF images
Fixed DBMOD state on some drawings.
Fixed PDF printer code with the JPEG and TIFF modules enabled
Added NEXTLAYOUT and PREVLAYOUT commands to manage CTRL+PAGE UP and CTRL+PAGE DOWN accelerators
Added check to avoid exception in property palette
Fixed display of scientific number with DIMZIN to suppress trailing zero
Fixed scale of image using property palette
Fixed double click on table to edit, now it doesn’t start anymore PROPERTIES command
Fixed: DXFOUT command locks its output file
Fixed selection of “Multiple” in QSELECT element type combo
Fixed draworder in text mask command
Fixed some problems on EasyArch 3D
Fixed access violation on creation of solid text mask.
Fixed BLOCK dialog creating block in wrong space when TILEMODE=0 and CVPORT>1
Fixed a bug on EasyArch 3D zmove command
Fixed PSELECT command to select entities for property palette
Fixed shortcut key to call “From” esnap in Esnap context menu
Fixed UCSNAME display in property palette with standard UCS (FRONT,BACK,RIGHT,LEFT…)
Fixed remove text mask
Fixed SOLIDGRIP with large coordinates solid and overlapping grips
Fixed property palette project to remove “active context” exception
Fixed WBLOCK saving file without extension
Fixed attach of xref using -XREF, now it attaches full path
Fixed LAYLCK and LAYULK with XREFs
Disabled WCLOSE and WCLOSEALL during refedit session
Fixed order of combo in qselect dialog
Fixed commands REVSURF,AI_REVSURF,REVOLVE,TABSURF,AI_TABSURF,EXTRUDE,RULESURF,AI_RULESURF,LOFT. AI_XXX and XXXSURF commands create meshes, the other ones instead have MODE option to create ACIS surfaces or ACIS solids
Fixed some EasyArch 3D bug when using variable height walls
Added NONE option to ESNAP/OSNAP command
Fixed TDINDWG variable
Fixed name and tip of Revolved surface in property palette
Fixed visualization of solid surface with customized isolines
Added Revolved Surface entity in property palette
Fixed wrong hatch origin
Fixed Ungroup of multiple groups
Fixed PDF creation problem and fixed use of TFW file
Fixed SNAPGRIPLEGACY from list setvar
Fixed CRTL + grip drag on table objects
Fixed BLOCK dialog, now it reloads some data selecting a block name from list
Fixed DIMLINEAR with ORTHO
Fixed GRIP using keyboard shortcut to move selected objects
Fixed localization of “*VARIES*” in property palette
VBA – enabled editing for tUpsideDown and tBackward options for text entity
Fixed cancel of discard of changes on REFCLOSE command
Implemented Import page setup button in page setup manager and added IMPORTPAGESETUP command
Fixed the errors when used custom unit factor
Fixed wrong wall calculation on ARC doors/windows
Fixed selection of blocks/attributes in EATTEXT dialog
Fixed unexpected change of zoom when you use the render in a perspective view
Changed the reference to 2DWALL and 3DWALL layers
Added new layers to EasyArch 3D to be managed with different colours
Fixed size of controls in PNEW dialog
Fixed separate option with TEXT inside hatching area
Added SPACe feature to cycle between grip functions
Fixed: AUDIT leads to creation of redundant text entities
Fixed: FLATTEN moves entity to current layer
Fixed Crash during print preview
Fixed: Shape names from SHX files should be handled as case-insensitive
Fixed: Unable to unload IRX
Fixed huge amount of ram used by a specific drawing
Fixed: (getorient) lisp function not working
Fixed: sds_getorient doesn’t accept E or N90E as input
LISP (entupd) and sds_entupd don’t update block reference if block was modified
Fixed “AutoSave drawing extension” position in options dialog
Fixed AREA command. Now it uses LUPREC to print Area value
Fixed default value for FILLETRAD variable
Improved scale command on Table
Fixed command hint window: Added mouse right click management, added check in OPTIONS dialog and menu item in context menu over command line to enable/disable this feature
Increased dimension of a button in DIMSTYLE dialog to fit some languages
Fixed: MINSERT does not insert the blocks with the correct rotation with non-global ucs
Fixed underlined char in one EattEdit dialog
Added Standard Scale combo in property palette about viewport entities
Fixed search path of drawing converted from dwg 2013 format
Removed duplication of VL-LIST->STRING function
VBA – Implemented SliceSolid method
VBA – Implemented SetPaperSize method
VBA – Implemented SectionSolid method
VBA – Implemented CheckInterference method
VBA – Implemented Purge method
Cannot rotate entities at non-zero elevation when in non-plan view
Fixed Crash during zooming when grips are shown in PS viewport
Fixed print problem when LWDEFAULT is 0 (printed borders were shifted)
Fixed Snapping on 3DSOLIDS in Blocks
Cannot get Nearest snap point for line if there are some attributes in block under cursor
Fixed PEDIT JOIN d(erroneouse segment removal from the new polyline)
Fixed Error using MatchProp on the dimensions
Fixed: Cannot snap to the end of Splined Leader
Fixed: Different behavior using SOLIDEDIT command to extrude a face
Fixed: New frozen layer created by VPLAYER is not frozen
Fixed: Printing doesn’t work from shell commands
Fixed: LIST command doesn’t display bulge for last node in polyline
Fixed: Hatching of visually closed POLYLINE fails
Fixed Deadlock in ATTDEF dialog
Fixed: sds_sslength should set length to 0 in case of failure
Fixed: LUPREC shouldn’t affect scale values in IMAGE attach dialog
Fixed: Deadlock in CONVERTPSTYLES during recomputing HATCH boundary with HPGAPTOL=1
Fixed several crash changing color or deleting entities or at close time
Fixed problem plotting specific drawing
MTEXT is always created in World UCS
Entget does not return DXF 74 (and 73) group code from ATTDEF/attribute
MATCHPROP doesn’t work for viewports
Dimension “Fit” and “Text Movement” fields issue.
Fixed: Stretch grip from External application fails
Using (initget) with keywords leads to an error message with garbage symbols in case of entering empty string
Fixed: Cannot get node snap in xref drawing when PDMODE is not zero
Fixed wrong attributes order in BLOCK command
VBA – Fixed Crash on AppendItems
Fixed Issue in MASSPROP command (Centroid)
Fixed crash undoing a viewport creation or layout switch
Fixed DRAWORDER after copying incorrect
Fixed: LIST command doesn’t show attribute name
Fixed: Zoom extents doesn’t work when first opening a drawing
Fixed Crash in PURGE Reviewed
Fixed: RTDISPLAY must be ignored for custom entities
Paper size is not read properly from DWG
Wrong print preview using particular Printer Settings
Fixed Crash doing PAN
Fixed: Text is displayed wrong (paragraph formatting)
Fixed: WBLOCK, INSERT and OPEN command should have separate, their own paths for drawings
Fixed: Bad UNC paths in references cause severe delays
Fixed: Cannot switch to PSpace from Viewport by double click if “Print paperspace last” is disabled
Fixed: Wrong TTF font is used for printing
Fixed: Viewport moves when “print upside-down” is toggled on during printing
Fixed Copy/Paste crash
VBA : fixed activeLayout.GetPlotStyleTableNames property
Added resize feature in attribute selection dialog of EATTEXT command
Fixed menu commands for _refclose _save and, _refclose _discard
Fixed space header/footer text issue
Fixed property palette for polyline2d entities, added global width and fixed single vertex widths
Fixed drag preview of rotation inserting a block without moving the cursor
Fixed height property into QSELECT dialog for TEXT objects
Removed rename of blocks and attributes from EATTEXT dialog
Fixed position of sample text in font dialog
Fixed RENAME command that allowed to rename layer 0
Fixed some issues on dynamic block grip
Improproved table edit, now the enter key moves to the cell below
Fixed double click on corrupted drawings
Fixed order of layer filters
Fixed font in raster dialogs

 

Verzija 14.0.6.13

 

Ispravke i novine u verziji su:

Fixed PDF creation problem (big size) and fixed use of TFW file with TIFF images
Fixed ESC while inserting a block
Fixed cancel on discard of changes on REFCLOSE command
Normalized paths returned from (getenv \”ICAD\”) instruction
Solved the stairs total height for EasyArch 3D
Fixed the errors when used custom unit factor
LISP: Fixed arc option in polyline with rotated/moved UCS
Fixed total height for stairs in EasyArch 3D
Fixed a crash when repeating command in EasyArch 3D
Added new layers to EasyArch 3D to be managed with different colours
Changed the reference to 2DWALL and 3DWALL layers for EasyArch 3D
Fixed problem on REFCLOSE on a specific drawing
Fixed problem to compute boundary with intersecting areas
Fixed exception in hatch boundary findings
Fixed performance of grip edit of dynamic blocks and tables, also improved performance changing these entities from property palette
Fixed compute boundary procedure with closed objects
Added \”_\” to express commands in menu and toolbar
Reworked \”Solids\” toolbar that became \”Modeling\” and changed some icons
Improved speed of getting information from PC3 using caching of papers detail
VBA, fixed vertex order for property Coordinates into object LWPolyline
PDF 3D. Fixed space header/footer text issue
Fixed open of some specific drawings with bad entities
Fixed crash during audit of files with bad layers
Fixed base reg path for profileseditor executable
Fixed Paste of table from excel or openoffice with diactitics
Fixed HATCH with NWUCS
Fixed freeze while selecting hatch area
Added help of render in pdf format
Deadlock in CONVERTPSTYLES during recomputing HATCH boundary with HPGAPTOL=1
Fixed reset of Scale List Dictionary
Updated PDF printer driver
Improved performance of TRIM and EXTEND and added message when boundaries are more than 10000
Fixed edit of external reference
Fixed REFSET (ADD option), TRIM, EXTEND, LIST, MATCHPROP to select objects outside refedit working set
Improved TRIM with ALL option without blocks
Fixed attribute height using AddAttributeDef from VBA
Fixed EXTEND and added capability to extend to block entities (also nested using variable TRIMALLMAXNESTEDBLOCKLEVEL)
Fixed TRIM ALL option using block, implemented TRIMALLMAXNESTEDBLOCKLEVEL variable that controls how many level of recursion for nested blocks
Fixed some issues about hatch command
Fixed crash from status bar
Wrong attributes order in BLOCK command
Changed pasteclip of table copied from libreoffice. Now it creates table entities
Disabled plot style item in EXPLAYERS when drawing uses CTB
Fixed select block button in EATTEDIT dialog
Fixed double click on block to edit attributes with NWUCS
Fixed memory problems hatching several areas
Fixed memory leaks in layer change logger (LAYERP command)
Fixed memory leaks in command hint window
Improved memory management with COPYCLIP
Fixed text height using AddText from VBA
Fixed update of color from VBA using ColorIndex property
Fixed exception drawing intersection glyph
Improved performance of boundary compute algorithm
Fixed Style option in MLINE command

 

 

Verzija 13.0.18.4

 

Ispravke i novine u verziji su:

Added some check to avoid exception in property palette and selection after ESC of gripedit
Fixed start of progeCAD from vbs, now it loads all IRXs
Fixed change of circle associated with a dimension
Added some check to avoid exception drawing UCSicon erasing some viewports
Fixed NLM server connection function
Fixed load of ANSI mnu file with some nordic characters (example :ä)
Added check to avoid crash in property dialog scrollbar sizing function
Improved speed of refresh property palette reloading layer combo values only if it needs
Changed a tooltip in PUBLISH dialog
Fixed tooltip of save and load publish list in PUBLISH dialog
Set HYPERLINKICON default to 0
Fixed Fylout position
Fixed the 256 color “Black” button in background color selection
Improved speed of QSELECT command on large drawings
Fixed show of command bar when progeCAD was closed without it
Fixed viewport scale panning in activated viewport
Fixed the bug with the APPLY button of FONT dialog
Fixed the bug with grid color not changing in DDRMODES dialog
Fixed redefine of existing blocks
Fixed the bug with the impossibility of insert 3-digits true color in COLOR selection dialog
Fixed crash using BATTMAN command
Fixed some options in menu using international options adding “_”
fixed open of some drawings with some bad spline
Added feedback send for NLMServer token activation
Fixed crash while copying some entities between 2 drawings using specific format of other cads
Fixed crash using publish with Amyuni PDF/JPG printer
Fixed cone command with center of base with z != 0, fixed elevation after cone command is now restored to original value
Fixed DIMRAD and DIMDIAMETER command to dimension circle/arc inside scaled blocks
Added LAYERCLOSE command to close LAYER palette, added OLMSTATE variable to check if layer palette is open, Added ability to CTRL+2 accelerator to close layer palette
Unable to join using “_pedit” command, lines disappear
Fixed close of floating toolbar
Added MNU update mechanism
Restored APBOX default value to 0
Added CTRL+RETURN to close MTEXT edit dialog
Fixed SELGRIPS command when are already selected some entities
Added try and catch to avoid deactivate activation context problems
Fixed crash on double click on mtext after close of a drawing
Fixed VBA FontFile method
Fixed EXTRUDE command preselecting entities
Fixed plot from VBA setting parameters
Added check on MTEXT dialog
Different direction of extrusion using polylines to make rectangles
Restored new OPEN common dialog
Fixed right click context menu
Fixed intersection of etrack/polar alignment lines
Fixed Etrack/Polar in NWUCS
Added server ip and port to the command line of NLMServerMonitor
Changed status bar and CTRL + 2 to call LAYER command instead EXPLAYER
Fixed change of description of layers in layer dialog
Fixed layer dialog restored display of latest columns values
Added command line xml report to NLMServer and NLMServerMonitor
Fixed message during RECOVERYMANAGER command during load of some drawings
Fixed problem on WBLOCK dialog selecting file name
Fixed starting color of hatch taking active one
Added MLSTYLE command to custutils project
Changed the menu loading procedure in order to accept UTF-8 files
Added check on MIRROR command to avoid regen if only one entity is affected
Fixed conversion problem in property dialog
Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
Fixed icGetColorDialog to get also RGB and colorBook colors
Changed PreviewEntity control to support multiple entities preview
Changed icDrawEntityToDC to icDrawEntitiesToDC to draw multiple entities on a DC
Minor change to layer dialog getting wrong plot style from API
Added ability to set plot style to layer from layer palette
Added icGetPlotStyleDialog to IRX interface to select Plot Style
Fixed command after VBA.InsertBlock
Fixed preview control preview image was upside-down
Added ADDFORM command to add customized paper size to some printers (our PDF,JPG and some others)
Added preview control in create table dialog
Added CEntityPreview control to display an entity in a control
Added icDrawEntityToDC api to draw an entity to a DC
Fixed icdbLoadMlineStyleFile function to load a file twice and fixed reading of angles in grads
Fixed load of multiple style mln file with a specific requested style
Fixed an error on EasyArch dcl
Fixed load of specific MLSTYLE from a file
Fixed icdbLoadMlineStyleFile function to load multiple MLINE style
Fixed PDF printer with custom paper size
Added message on command REFCLOSE when it fails
Fixed load of layer combo in property palette to increase speed of common operations (ZOOM/PAN)
Fixed layer palette that slows down LAYISO command on large drawing. Improved refresh of layer palette adding a timer to stack all refreshes
Fixed load of UTF-8/UNICODE toolbars
Adjusted Table compilation for EasyArch2d
Fixed linetype combo box, now when is selected some entities it doesn’t change active linetype
Fixed Plotter manager dialog with our PDF/JPG printers
Fixed LMAN dialog creating a new state with a drawing with a group or a filter of layers
Fixed print of text with ISOCP,CALIBRI,PALATINO TT fonts
DDEDIT changes justification of text
progeCAD color dialog should be used in Print Style Table Editor instead of Windows color dialog
Wrong value is displayed for snap rotation (“SNAP -> Rotation” command)
Crash on opening TEXT editor
When PRINTTEXTOUT=1, xref clipping doesn’t work properly for printing
Alternate Font is not used for missing truetype fonts
Cannot create hatch in active viewport
Cannot import PGP file with TAB
cannot use esnap NEAR with “little” (radius ~ 0.1) circle
Cannot use snap INT with MLINE entities
Many problems using ssget from lisp (or SDS)
VB function GetObject, after CreateObject, doesn’t work
Wrong range and default value for FIELDEVAL variable
crash moving between model space and layout 1
Image command
SelectOnScreen doesn’t highlight entities during selection
VBA Hatch.ApplyHatch is not implemented
Mouse movement is slow while a command is active in heavy drawings
_refedit command: need a message before block editing
-IMAGE – Detach removes IMAGE entities instead of IMAGE definitions
Ability to turn off real-time Orbit and Twist (by Ctrl+Click) is required
ACISOUT cannot create ACIS SAT file other then version 700
ACISVER doesn’t return correct version number of ACIS.
Activating Antialiasing produce a section (not desired) in the rendered objects
Add cut/copy/paste features to MTEXT documentation
AddVertex doesn’t work
ArchT Hangs on Autosave Comment: Main engine thread allows process send messages during execute UI actions now.
Assertion is shown when attempt to detach a XREF
Association doesn’t work for Aligned Dimension
AttachExternalReference method of Modelspace fails
Attempt to open any drawing in icad.lsp, *.mnl or in other startup sequence member leads to incorrect behavior
ATTEXT issue
Bad print style file results in improperly handled condition.
Block changing position during Zoom operation
Cannot attach image files different from jpeg using progeCAD Explorer
Cannot create Wipeout via (entmake) properly
Cannot do center snap to arc segment of closed polyline
Cannot control Osnap tooltips properly
Closed method on LWPolyline doesn’t work
Context menu does not allow to copy more than 100 selected entities
Context menu imported from MNU file always shown in main menu
Context menu is opened with some delay if select a lot of entities.
Context menu on RMB is much too big. It is very confusing and overwhelming
Crash in EXPLORER during erasing layers (Win8 only)
Crash on saveas in particular drawings
Crash right after calling CONVERTPSTYLES
Crash when entity selected on the previous drawing is modified on a new drawing
Cursor slows down with “selectionpreview”
Deadlock in OpenGL on progeCAD start
DIMDISASSOCIATE command doesn’t work
Dimension on block
DIMRADIUS issue on object with Z <> 0
Direct entry of Unicode codes does not work in MTEXT dialog
Document use of commas for aligning text in headers and footers
DRAGNDROP doesn’t work for attached drawing
Improvement in DRAWORDER performance
During SELECTIVEREGENMODE=0, out-of-view raster image disappears when regen is performed
DWG association with progeCAD doesn’t work on some machines
Entities from nested XREFs are not visible in Layout
Entity goes to bad state by DEL command with enabled SELECTIONPREVIEW (3) and HIGHLIGHTLIMIT>0
Entity snap glyphs are not displayed if launch progeCAD and create or open a drawing
entmake for blocks always calls Regen
Entmake should create a entity specific handler for as many entities as possible.
Error during the image editing with the ORTHO function ON
(acad_colordlg) if flag=nil to disable ByLayer/ByBlock, the “Black” button returns 256
(ssget “ALL) does not work
[Crash] Cannot FLATTEN a leader
[Crash] Crash on open – problem with Activation Context
[CRASH] Deleting viewport causes crash
[Crash] progeCAD crashes sometimes on drawing closing when it occurs simultaneously with RealTime view change
[ENTPROP] sorting layer list
Excel document cannot be inserted
Exception if UNDO after REFCLOSE
Exploding blocks causes draworder change
Failed -DIMSTYLE command ANnotation option
For attached drawing – polyline is not drawn at the top of other entities during selectionpreview
General issue of calling commands from explorer
get_ProductOfInertia COM method is not implemented
GetEntity, GetInput and keywords do not works
progeCAD doesn’t set proper SDS function code when SDS function is registered by sds_regfunc
progeCAD occasionally crashed when exploding a block
ICADDoc.lsp is not called in case of run progeCAD by opening .dwg in explorer
icedGetPoint does not show pointer properly
icedSetCurrentView doesn’t refresh temporary graphics
If MNL file for some MNU contains MENULOAD command call, corresponding MNL file won’t be handled if it contains LISP (command) calls
-IMAGE -> Detach removes image entities instead of image definitions
IMPORT PGP function fails in ITALIAN language
INSERT command crash block has attributes and ATTREQ=1 and ATTDIA=1
INSERT command disable scale y and x field when user choose uniform block
INSERT command rotation default value use AUNITS and AUPREC
INSERT object disappears after closing the “progeCAD Explorer”
Inserting a Block with const attdef make wrong data
Issue in PRINT operation with WINDOW option
LENGTHEN command for polylines changes entity Layer to current
LISP ssget filter 430 set wrong selection set
LIST command does not display bulge for last node in polyline
List of blocks is not displayed in progeCAD Explorer if open any drawing with blocks
Fixed MASSPROP issue.
Middle mouse button should activate PAN command.
Missing paper rectangle on layouts
MNL scripts are not loaded properly when several drawings are opened at once
MTEXT entities are shown incorrectly in attached drawing
multiline text change position
Nearest snap overrules the grid and Ortho function
Need to implement context menu for options->paths settings.
OSNAP markers are not visible when used for entity filled by the same color as snap markers
Parallel snapping doesn’t work for XREF
Particular JPEG 2K image does not display in color as it should
Polar tracking works wrong in NWUCS – Extension snap works incorrectly in UCS for linear entities
PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
Print SCALED IMAGE problem
Print style table editor doesn’t release acquired GDI resources
progeCAD doesn’t recognize the coordinate position in the MNU file
Refedit command is limited at the first two block levels
Rendering does not work with perspective ON
Right click pop-up menu option in drawing window to have recent commands
Right-click menu disappears if mouse is moving at the moment of clicking
ROTATE command does not take angle input in form 45°28’40”
RQXLOAD event not called everytime a drawing is opened/created
SDS function code can be corrupted by commands called from SDS_CBCMDBEGIN callback
sds_getstring return wrong string from script
sds_ssget() does not work correctly on off layers
Search path is growing when attaching XREF’s
SelectOnScreen doesn’t close selection
Size error when inserting raster image
Some polylines in attached drawing are not visible during Print Preview
SPLINEDIT layer issue
STRETCH doesn’t work correctly if polyline has 0,0,-1 normal
Style and Language fields are empty if create a new style using -STYLE command
STYLE command font problems
System variable PRODUCT must be read-only
The objects with thickness different from “0” are not printed using its lineweight
The order of entities in the selection set is not consistent
The selection of the hatch area depends from the zoom level
The UCSVP variable has a strange effect on the height while drawing
The VBA entity creation doesn’t set Defaults properties
Toolbars can be lost (not restored) on restart of progeCAD
U.S./Imperial Units support for Export PDF
Unable to scroll drawing with specific keys
UserCoordinateSystems.Add, method does not behave correctly
Utility.Prompt doesn’t support new line character in the message
VBA – Entity.ArrayPolar() copy wrong space when TILEMODE=0 & CVPORT=2
VBA AddLeader method and Annotation property compatibility issue
VBA AttachExternalReference() have to check block Name is defined
VBA Block.AddItems always delete existing objects in the block
VBA ConvertArrayToPoints become Out Of Memory Error
VBA does not set object height as 0.0
VBA GetEntity cannot recoginize OdDb2dPolyline
VBA progeCAD Crash when set duplicated table record name
VBA Offset creates new objects but doesn’t append to Database
VBA selection set filter support more group codes
VBA Some AddXXXX() methods cannot create object into user defined block or inactive paper layout block.
VBA Utility.WildCardMatch is not implemented
VBA which functions returns E_NOTIMPL
VBA, New keyword only works the first time
WBLOCK/-WBLOCK fail silently when trying to write to an open file
When you place your cursor on the dimension text, snap point on the dimension line is obtained.
Wrong behavior if REFEDIT read-only xref
Wrong visualization in layout using an hidden view
XREF problem with GRADS
Xref reloader does not work

Verzija 13.0.16.21

Ispravke i novine u verziji su:

Fixed starting color of hatch taking active one
Added grips to entities selected via VBA.ActiveSelectionSet
Fixed command after VBA.InsertBlock
Fixed display of plot style in layer dialog
Updated Amyuni PDF Converter from version 4.5.3.5 to version 4.5.3.7
Localized some tooltips in hatch dialog
Implemented SetView function in VBA
Fixed Import and Export of DXF from VBA
Fixed VBA CreateColor parameter now uses RGB value
Fixed crash detaching not found xref
Fixed message during RECOVERYMANAGER command that stops load of some drawings
Removed progress bar from splash screen to avoid deadlock during startup
Added lock to avoid update of drawing during IRX load
Fixed problem on WBLOCK dialog selecting file name
Added check on MIRROR command to avoid regen if only one entity is affected
Fixed conversion problem in property dialog
Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
Implemented VBA.PurgeAll method
Fixed icGetColorDialog to get also RGB and colorBook colors
Fixed Import and Export of DXF from VBA
Fixed an error on EasyArch dcl
Fixed VBA Export function to export DXF files
Modified the Sources sentences for PLINE command
Fixed problem on icGetLinetypeDialog api
Fixed collinear walls in EasyArch
Fixed print area including borders
Fixed perspective view render and render with antialias
Enabled print transparecy images
Fixed helpstring on status bar of flyout buttons
Fixed “Fractional type” property for dimensions in property dialog
Fixed default value for REGENMODEGLOBAL to 0 to disable popup balloon during zoom
Restored “Select by properties menu” to call Filter option and added “Quick select” to call QSelect
Fixed localization of QSELECT command
Fixed right click context menu with a number of selected entities > of GRIPOBJLIMIT
Fixed RECOVERYMODE variable setting
Fixed creation of new UCS from VBA
Added old VBA.Workspace events
Fixed placement of docked toolbars imported from MNU
Fixed position of imported (from MNU) floating toolbars
Fixed EXTRUDE command. Fixed Extruded entities position and fixed region extrusion.
Fixed property palette alignment point for TEXT and ATTRIBUTE definition
Fixed mesh menus
Fixed some issues that could cause exceptions
Fixed QDIM with NWUCS
Fixed intersection snap between LINEs and MLINEs
Fixed crash selecting center osnap on some cylindric 3d solids
Fixed VBA SelectOnScreen to highlight selected entities, disable right click menu, command line message and cursor shape
Fixed PICKADD checkbox in options dialog
Fixed creation of a block with many entities from VBA
implemented VBA ApplyHatch method
Added redraw in Layer palette to force redraw of drawing after layer change
Alternate Font is not used for missing truetype fonts.
Fixed NEAR esnap when PARALLEL is active
Added Multileader,Image,Table and Multiline to QSELECT dialog
Fixed hatch dialog with dimension
Fixed hatch dialog and boundary dialog height
Fixed a problem with TRIM and rectangle selection set
Fixed VB GetObject taking an instance created using a previous CreateObject
Added ObjectModified, ObjectAdded, ObjectErased events to VBA Document
Fixed the dimensions of the imported Google Earth images
Removed control over the file name for the FONTALT into Options Dialog
Changed default FONTALT variable, from ic-simplex.shx to simplex.shx
Added TrueColor property to improve compatibility with Autocad
Added few properties and methods to VBA Document object
Implemented new VL, VLA and VLAX functions:
vlax-get-acad-object, vla-get-activedocument, vla-get-modelspace, vlax-get-property,
vlax-put-property, vla-get-count, vla-item, vlax-vla-object->ename, vlax-ename->vla-object,
vlax-curve-getpointatdist, vlax-sevice-print, vl-vbaload, vl-vbarun, vl-prin1-to-string,
vla-get-Height, vla-get-WindowState, vla-put-Height, vla-put-Lock, vla-put-Width,
vla-put-WindowState, vlax-Release-Object, vlax-safearray->list, vlax-variant-value,
vlax-Create-Object, vlax-get-or-create-object, vlax-getinterfaceobject, vla-delete,
vla-get-registeredapplications, vla-get-utility, vlax-curve-getarea, vlax-curve-getclosestpointto,
vlax-curve-getclosestpointtoprojection, vlax-curve-getdistatparam, vlax-curve-getdistatpoint,
vlax-curve-getendparam, vlax-curve-getendpoint, vlax-curve-getfirstderiv, vlax-curve-getparamatdist,
vlax-curve-getparamatpoint, vlax-curve-getpointatparam, vlax-curve-getsecondderiv,
vlax-curve-getstartparam, vlax-curve-getstartpoint, vlax-curve-isclosed, vlax-curve-isperiodic,
vlax-curve-isplanar, VlaxInvokeMethodProxy
Fixed crash when JPG printer is not installed
Fixed print of scaled image
VBA.AddVertex doesn’t work
Fixed QSELECT with only one command active
VBA :Fixed creation of hatches in an active viewport of a layout
Added QSELECT command to select options in command line
Fixed QSELECT dialog selection of circle by radius
Added Transparency property to QSELECT dialog
Fixed QSELECT dialog using some operators searching default DXF values (color, lineweight, linetype, linetype scale, thickness)
removed standard selection set menu items from CHAMFER and FILLET commands
Added mechanism to reduce memory footprint changing layout, it starts when REDUCELAYOUTMEMORY variable is ON and when used memory > 2GB or available memory is less than 70%
Fixed the bug with wrong image dimension ration during the ImportGEImage command with the Google Earth images
Fixed the bug with foreign command line keywords in IMAGECLIP command
fixed the bug with the activation of “Apply” button in text style dialog
Added operator combo to QSELECT dialog and reworked layout
Fixed display of layout tabs opening drawings
Fixed DRAWINGTAB command to hide/restore drawing tab
Added UPDATEFIELD command to force update of field in texts
Fixed FIELDEVAL variable
Fixed a couple of minor Express bugs
Fixed some Express menu items
Fixed Zoom extension command and fixing UCS icon problem
Fixed recovery manager to manage also saved file by emergency crash system
Fixed crash changing layout
Fixed Emergency save output folder
Added some check on PDF2CAD destination, now progeCAD checks if the file already exists, right extension specified and output directory exist and has rights to write in
Changed CIRCLE TanTanTan menu command
Reverted the NEW command to ask always for a template file
Fixed color of icons in menu
Fixed hatch island detection (problem generated during last merge with ITC source)
Added “remove boundaries” button in hatch dialog
Added message box to allow to user to show created PDF or JPG after print
Toolbars can be lost (not restored) on restart of progeCAD
Cannot select the correct grip of 3D line
Entity snap glyphs are not displayed if launch progeCAD and create or open a drawing
[CRASH] Fixed crash due to arithmetic overflow
When ORTHO is ON you can not draw ortho lines
Crash by selecting the line
OLE background color: added OLEBKGCOLOR and USEOLEBKGCOLOR
progeCAD hangs when open a xref from progeCAD Explorer
Rulesurf doesn’t work for closed entities
LENGTHEN command for polylines changes entity Layer to current
progeCAD freeze during the selection of 3d object in the attached drawing
INSERT is not working correctly when ORTHO is enabled and insertion point is specified on screen
[CRASH] Fixed many crashes
Missing dialog title and possible data corruption
Grip points of a new drawing are displayed in the previous drawing
SDS command calls from LISP leave CMDACTIVE in wrong state
Solid with applied material is invisible
Autosave improvements
[Crash] Crash in OpenGL on drawing open/close
Slow response to select the displacement for moving objects while a command(copy, …) is running
Improved support for naming of bitmaps in MNU files
If cancel insertion of a block, progeCAD makes UNDO
Offset error of 2Dpolyline
IcadDoc.lsp is not loaded if progeCAD is started using COM
Additional windows (views) cannot be focused / used
Polyline linetype is generated with different scale in progeCAD
[Crash] opening program
XML Toolbar with resource dll cannot show buttons
ssget works wrong when filter contains regapp
No line feed in setvar prompt
PLINEGEN variable doesn’t affect linetype generation for polylines
Prompt items are not correct in the -STYLE command
Entity disappears when it’s layer color is changed
Wrong stretch of an arc
3DSolid visualization issue
GRIPS=0 forces PICKFIRST on
An application must register with Default Programs feature to be offered as the default program in Windows Vista and later.
LISP (ssget) with filters prints wrong number of entities
DIMSCALE value is not applied to DIMCENTER
The hatch disappears after copying or moving it
-DIMSTYLE command doesn’t list dimension styles alphabetically
-STYLE command doesn’t list styles alphabetically
Stretch using grips and esnaps does not work right along the Z axis
COPYEDATA,MOVEEDATA,DELEDATA allow wildcard for source application id
Wrong visualization in layout (out of layout window and rotated)
Result of Perpendicular Osnap depends on Zoom Window
getcorner cannot return keyword like getpoint
Layers names are not in alphabetical order with -LAYER command
Error extruding the polyline in this drawing
EXPLORER delete linetype must not set layer’s ltype to Bylayer
Inconsistency in ‘lisp’ local variables
sds_dispobjs returns 2 vertices chains for PFACEs
Select all entities does not include entities from the viewports different than the current viewport
[Crash] Crash during panning in locked viewports
EXPLODE issue on REGION
SDS initialization/uninitialization RQ request codes usage for applications is wrong!!!
SDS callback deadlock
DIMRAD and DIMDIA silently exits if no entity picked
Entity snaps don’t work for a PlaneSurface
[Crash] Crashed when switching to Layout2 from Layout1 after dimensions creation
[Crash] 3D ORBIT
[Crash] Explorer dwg double click
[Crash] Attempting to open a new drawing using an existing template
Text dimension in edit text dialog (single line text)
Cannot to snap to grip points during grips dragging
ZOOM Dynamic does not work properly in NWUCS
(sslength) returns RTREAL
Command REVOLVE does not work when object started from revolution axis
Improved performance in canUndo() function
Critical issue during PC3 creation with plotter HP
Attempt to use HATCH leads to infinite loop for attached drawing
Insert HATCH problem.
WIPEOUT entites printed as black rectangles when named print style is used in attached drawing
Grip editing dimensions should be disallowed when UCS isn’t parallel to ECS
Different direction of extrusion using polylines to made rectangles
MTEXT editor to have ability to clear formatting
Unable to load a .mnu file from path with dot symbol
Transparent zoom window breaks getpoint jig dragging line
[Win8]”Could not start print job” message displayed for printers configured on port FILE:
Incorrect tangent snapping to spline
PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
Do the alignment. Then, a Z coordinate is changed.
Right click pop-up menu option in drawing window to have recent commands
Fillets don’t always work for solids using coordinates not in WCS
Cannot save changes of REFEDIT session by REFCLOSE for test drawing
Entity is not redrawn when changed via Entity Properties toolbar
[Crash] Crash during changing color from Entity Properties toolbar
UNDO option inside Selection state of commands is extremely slow for big number of entities
LISP (initget) and sds_initget are not interchangeable
Transparent zoom window breaks getpoint jig dragging line
3dSolid is always rendered in grey color (entity material is ignored)
Unable to define a box with Z negative value
Crash on open after roundtrip in some scripts on Windows 8
CHSPACE creates wrong entities when there are twisted viewports in Layout
The icaddoc.lsp doesn’t executes propriety then opening few drawing at once
Improved performance of the RTPAN command
Entity tracking is not working in UCS
Member needs to know when 3DObit is active or not.
[Crash] Crash on exit in scripts which uses PDF underlays.
SDS_CBVARCHANGE notification is not called in all circumstances
Wrong area calculation for HATCH entities with holes (hole area is added, instead of being subtracted from the total)
“Pointer defaults to crosshairs” should be enabled by default
Code for handling pface meshes is throwing with invalid index error
PEDIT is not working correctly for spline fit and curve fit pline
FREEZE / THAW switching is too slow
LAYOFF error
Apparent intersection snap leaves tracking points
Wrong behavior of Tangent/Perp/Quad snap in UCS
Quadrant snap doesn’t work correctly in UCS
during RTROT the mouse cursor should change to show appropriate orbit mode/constraints
Undo issue-One of all entities ALWAYS cannot be deleted After Delete & Undo.
Icon toolbar customization, confused
Review AllCOM failures and fix bugs or scripts
Some dimensions are updated incorrectly during COPY and EXPLODE of the block
Extension snap works incorrectly in UCS for linear entities
progeCAD doesn’t support Multiline Tooltips for Snaps
Image manager – image preview is black after an image is erased from the drawing
Show snap setting on cursor is not working right
Hatch vs Dimensions issue
progeCAD uses > 1.6 GB while plot preview and pdf is missing
Even if “Pointer default to crosshairs” is turning off, Crosshair is seen
Cursor is reset to crosshair if display options dialog is loaded during active command
Block dimensions are moved in wrong places
Serious problem with DIMRADIUS / DIMCENTER on blocks
Pan command does not change cursor type
Object tracking does not work from lisp routine
Zoom Dynamic has several problems
Second crosshair appears and freezes after switching drawings by Ctrl+Tab
Resizing images by grip points works incorrectly
Missing SDS_CBDOCCHG notification when closing a drawing.
ZOOM command options are incoherent comparing POP UP and Command Prompt
Mouseover (SELECTIONPREVIEW) highlighting makes cursor very slow and jumpy when zoomed in on image in attached drawing
Extension snap is not working for elliptical arc in WCS and for all entities in UCS
Icad can’t extrude region on a closed polyline
OLE2FRAME disappears after redefining block
Grammatical mistake in the prompt while redefining block
OSNAP points are not implemented for SubDMesh entities
No linetypes are loaded by -LINETYPE command if .lin file contains some invalid data
-GROUP command creates only even unnamed groups
ZOOMWHEEL sysvar is treated as a boolean, instead of 0/1 value insinuating it turns zoomwheel on/off.
Parallel snap doesn’t work if enable Parallel and Extension snaps
“Select all” button needs to be added to the Entity Snap Settings dialog
When app is loaded via Icad.sds the request msg SDS_RQXLOAD is fired before progeCAD is initialized
Images on OFF layers affect performace
progeCAD always uses the same CPU on multi-core systems causing performance issues when multiple sessions are run on the same machine
Cursor slows down with “selectionpreview”
Russian Linetypes with ” in definition do not load
Custom OSNAPs don’t work
ssget, viewports and layout
Sometimes AUTOSAVE doesn’t work when ICAD window is inactive
Linetypes loading is stopped as soon as linetype with unknown font is met in .lin file
ETRACK: Arc & Elliptical arc behave badly for _EXT osnap in non-world-UCS
The print preview does not show all the entities in the layout
Incorrect PERPENDICULAR snap to arc segments of PLINE in NWUCS
A new anonymous block can not be inserted if we tried before to add another anonymous block two times
[VBA] I can not create the DIMSTYLE.
MTEXT editor renders text very different from the drawing
Cannot enable more then one snap using the command line while a command is active
Disappearing blocks on large coordinates
JPEG image does not open
Bigfont load problem
Text string is not printed correctly in some cases
PURGE does not complete initialization on attached drawing
getPoint without base point is not working when ORTHO is enabled
ARC definition bug
progeCAD hangs if explore groups in a drawing with a huge number of groups
progeCAD hangs if display all groups in the Group dialog in a drawing with a huge number of groups
Sorting groups by name works very slow…
REVOLVE and UCS fail
Fixed occasional crash occurring during printing
Hatches are shown with low density in progeCAD
Deadlock if callback is called at the same time when COM Job is sent to Main Engine, which is waiting for Main thread
VIEWCTL command doesn’t works in the LAYOUT VIEWPORTS
If you execute an INSERT and press RMB then RTCAN has to be returned
Attempt to change image path in the Explorer leads to crash
IMAGE path updating functionality is not working
ICAD is deadlocked when sds_draggen callback performs any operation with dialog created by SDS app
DROP-DOWN COLOR LIST issue
Some entities in NWUCS are not being handled properly
Incorrect prompt if hatch area not fully visible in window
Crash in INSERT command
MIRRTEXT = OFF, Horizontal problem
PURGE command doesn’t delete UNNAMED GROUPS
Wrong ETRACK behavior
progeCAD crashes during changing entities color
Cursor freezes when trying PERPENDICULAR snap to spline in NWUCS
Strecth by grips error of hatch entity
Command “Convert to Mesh”(3DCONVERT) does not work
Aligned dimension shows incorrect text for MSPACE entities in PSPACE
Fillet is created in wrong UCS
Setting zero scale for viewport causes crash
Periodical crash in Array command
LISP variable types are being promoted long to real and short to long
Deleted entity can not be added to the selection set
Fixed JUSTIFICATION > FIT error

Verzija 13.0.14.11

Ispravke i novine u verziji su:

Added PUBLISH command
Fixed several crashes
Fixed paper size order in print dialog
Restored name of block in QSELECT list
Fixed localization of some sentence in Recover manager dialog
LISP: Added vl-cmdf function to VLISP project
LISP: Added layoutlist lisp function
Inserted error message for conversion PDF to JPG
Upgraded PDF and JPG driver from version 4.5.3.3 to version 4.5.3.5
Fixed missing uninstall part for pdf printer
Fixed UCS toolbar, button ORIGIN.
PDF2CAD: set tickness to 0 for all entities converted
PDF2CAD: removed request to open files
PDF2CAD: fixed some messages
Fixed creation of PC3 with specific option in HP Djet 500 plotter
Fixed esnap NEAR to circle with little radius (0.1)
Fixed OFFSET error of 2Dpolyline
Fixed import of PGP files with tabs
Fixed icad.fmp file to remove substitution of fonts
Fixed crash opening drawing with password and scrollbars activated
Global linetpe scale – Property dialog not working
Fixed crash using Explorer->blocks
VBA: The method AddAttributeDef doesn’t assign current layer to entity
VBA: fixed several VBA methods
VBA: Block.Delete method is not supported
Restored default settings: User can restore only Menu or Toolbar
Removed message prompt for searching missing references
Added SNAPGRIDLEGACY variable to constrain cursor movement to GRID also when no command or selection active (default is off)
Added CTRL+ENTER to press OK button to close EATTEDIT dialog
Improved selection of attributes in EATTEDIT dialog directly on double clicked
Fixed crash pressing OK in print dialog
Fixed crash using property palette
Improved ability to cancel search of closed boundary in hatch dialog
Improved closed area recognition fixing various deadlocks and improved algorithm
Changed CH alias to ENTPROP command
Fixed filter names after creation in LAYERS dialog
Fixed paths tab in options dialog
VBA: Fixed property closed on object LWPolyline.
Added progressbar in hatch area compute and increased ESC management (also analyzing sub paths)
Added Autocad 2013-2014 clipboard format to allow PASTECLIP in autocad recent versions
Added check to avoid crash on COPYCLIP+PASTECLIP in another application
Fixed LAYFRZ command with dimension
Fixed crash on ESC on print preview
Fixed EXTRUDE command with large coordinate
Fixed direction of extrusion
Fixed search order for SHX files, now pcad first searches in drawing folder then in other search paths
Changed plot header and footer separator char from “,” to “|”
Fixed API to set overridden plotting configurations
Fixed crash when dimassoc = 0 dimlinear doesn’t work.
Fixed DWFOUT command, now uses dialog to choose filename and uses parameters in dialog
Fixed VIEWPOINT command removing ESNAP when user type coordinates on keyboard
Fixed display of RECOVER message loading a corrupted file with double click
Removed plot length limit from paper size
Fixed attribute edit during INSERT command
Fixed INSERT with NWUCS
Fixed margins for plotters with large paper size (A1 etc.) removed PRINTAUTOROTATE variable behavior

Verzija 13.0.12.12

Ispravke i novine u verziji su:

Fixed change of path of images
Updated PDF Printer to Amyuni Document Converter 4.5.3.3
Fixed COPYBASE temporary removed grips before selecting base point
Added TEXSIZEGRANULARITY to change size of texture used as drawing plane
Fixed TXTEXP crash progecad selecting all drawing
Added MINOPENGL variable to set minimal OPENGL version requirement to activate HW display system
Added some missing SHX fonts duplicating and renaming existing and updated icad.fmp
Fixed _VIEW (R option) that makes always visible UCS icon
Removed confirm question creating an existing view using command -VIEW (W option) like autocad and progecad 2011
VBA : Fixed Lock property in Layer object
Changed drag of dxf files now it uses DRAGOPEN variable to choose to open or to insert a dxf file
Fixed load of old,bad CTB files made by old version of intellicad
Fixed POLYLINE command with negative angles and using always same angle values
Fixed display of images in NWUCS
Fixed all profiles problems
Added setting to force NVIDIA GPU to work with progecad with notebook with dual GPU
Fixed copyclip and paste in word
Fixed OBject option in UCS command
Fixed etrack point acquisition with NWUCS
Fixed command “Convert to Mesh”(3DCONVERT)
Added option to -TOOLBAR command to permit to delete all toolbars
Changed PICKBOXCOLOR to 7 (white) as default
Added delete option to -TOOLBAR command
Fixed VBA method SelectByPolygon.
Fixed usage of “=” in -INSERT command
Added SETATT function in progecad.lsp
Fixed -INSERT command from menu with spaces instead of ‘;’, path for blocks should use ” to describe paths with spaces inside
Fixed redefinition of blocks only using “=” in -INSERT command
Added check on already protected scripts in LispDefender
Fixed VIEWRES (ZOOMPERCENT), SPLINESEGS, FACETRES and ISOLINES variables in the CONFIG DISPLAY dialog
Fixed open of dwg files version 2013 that needs recover after conversion
VBA: Fixed “New” of Point, Matrix, Vector, Points
Fixed name of printed document to allow print of PDF files
Grouped toolbar in popup menu
Fixed the bug with HATCH editing angle set
Fixed load of toolbar used also as flyout
Fixed getpoint with ortho from lisp
Fixed “inherits properties” in hatch dialog now after use it once you can change properties
Added readalisfile function (available in lisp)
Fixed ETrack with TAN points
Fixed compounded (deferred) tangent between two circles (or arcs)
Fixed print of drawings with non ANSI chars (czech) using our PDF printer
Added ICAD environment variable management to set search paths
Fixed maximum length to 256 chars of command in imagemenu button
Added /perf parameter to log cursor display time
fixed for wireframe 3D printing problem
Fixed access violation on preview.
Reenabled scrollbars
Fixed load of flyout images from a dll
Added message to ask to overwrite a file in WBLOCK dialog
Fixed set of viewport visualstyle and removed useless shadeplot
Fixed menu check of UCSICON commands
Added “.dwg” to file name in wblock dialog
Was removed error message when requested menu wasn’t found. (menucmd function does not require any massage)
Fixed background color and position of entities in pasted objects in Word
Improved copyclip and paste in word
Fixed COPYCLIP and CUTCLIP to copy only selected object
Fixed crash reloading a toolbar with missing flyout
Fixed greyvar for UCSICON commands in menu
Fixed crash after selecting a command from nested flyout in another flyout
Added ConfigurePrinters command, changed a menu item, changed a string in the CONFIG dialog
Fixed esnap EXT without any other esnap
Fixed load of nested flyout
Fixed Etrack point acquisition with INT and END esnap
Fixed performance searching files in network
Changed ESNAP menu in status bar, added EXTENSION snap and fixed APPARENT
Fixed hang on WBLOCK and crash closing progecad
Fixed TXT2MTXT bug with BYBLOCK color assignment
Fixed show of application during edit of embedded OLE object in other application (office/autocad)
Fixed open of embedded object in other application (autocad/office)
The REFEDIT toolbar get hidden at the end of REFEDIT command only if it was opened by the REFEDIT command and wasn’t already visible by its own
Added base.dcl to translate base tiles of dcl dialogs
Now base.dcl file is being first loaded from progeCAD root folder and if not found there – loaded from the resources
Added check on easyarch commands to avoid problems when there isn’t open drawing
Fixed crash selecting a dimension in a drawing with errors
Fixed PNEW preview image overlapping with bitmaps
Fixed the context menu appearing on “More” button in MTEXT dialog
Added “VBA missing” message on BATTMAN and other vba commans
Removed default values from ddattdef dialog and restored original sentence in command line version -ATTDEF
Fixed the Bullets and Lists changes in multi text editing
Changed list of command to exclude Recovery manager file recorder
Changed network path resolver to use different api to solve problems opening files on some NAS and other operating systems
Added “Zoom Fit” button to the print preview dialog
Fixed “Select Entities” button in properties palette
Changed color to white of background color in pasted image
Fixed Recovery manager to ignore “false saves” during COPYCLIP and COPYBASE commands
Localized some strings in -IMAGEATTACH command
Fixed memory problem selecting image extension from file dialog in ATTACH command
World to paper space calculation is fixed for both linear and aligned dimensions.
Improved ESNAP perfromance in drawing with image and GRID active
Text with zero height can be created if switch text styles using toolbar
[VBA]Filtering of the entity does not work with SelectionSet.
Incorrect NEAREST snapping to arc if viewpoint is non planar and UCS is not world
Entity Properties toolbar should work regardless of PICKFIRST system variable
Fixed VIEWPOINT Crash
Can’t select drawing file version in WBLOCK dialog
Cannot to switch to PSpace by double click if something is selected inside viewport
Some entities in NWUCS are not being handled properly by (trans), Fix for Chamfer, Divide, Solid.
Aligned dimension shows incorrect text for MSPACE entities in PSPACE
ICAD cannot save drawing in some formats
Moving a grip intellicad freeze
Maximal possible value of AUTOSNAP variable shouldn’t be tied to default value
Fixed printing of large google earth imported images
Perpedicular snap doesn’t work properly
Strange behavior when you edit a text
Fixed STYLE / EXPSTYLES – font “(not found)” error message is not true
Incorrect Nearest snapping to NWUCS mspace Spline in Layout
HATCH created with wrong elevation in NWUCS
Offset problem using esnaps
The stretch command does not allow a multiple window selection
WP selection doesn’t work properly for NW view
Switching ORTHO with F8 is not working for LISP commands
The stretch command does not allow a multiple window selection
Crash during LINETYPE command
If you execute an INSERT and press RMB then RTCAN has to be returned
The stretch command does not allow a multiple window selection
Linetypes with dots loose the dots on display
“_solidedit” command. You can’t use a negative angle value to rotate a face
The stretch command does not allow a multiple window selection
Some block entities are not printed correctly in attached drawing
MASSPROP command ignores UCS
^P (menu echo) used in menus will cause an extra return when the menu item is activated
ICAD LISP interpreter is slower than ACAD
During placement the INSERT command creates a temporary entity in combination with OSMODE = 512
Redefine existing block does not work properly
The stretch command does not allow a multiple window selection
Wipeout frame is now always plotted
Audit errors are reported for text style with height = 0
SDS app which creates block table record failing with SPLINE, HATCH and curved POLYLINE.
INSERT with angle 0 is not previewed and placed at angle 0
[VBA] CAD crashes when adding an XDATA in “SetXData” method.
sds_initget/sds_getpoint combination should return RTKWORD
Added missing XLIST command
The Stretch command doesn’t work on HATCH
_DTEXT , left-click inserts text
-PLOT command should work also with uppercase printer name from scripts
Creating ARC TANGENT issue
The value 360 degrees for Rotation angle is accepted
Record name duplication in AutoLinetypes table is not checked in COM interface
(EntMake) of polyline inside a block fails when returning SEQUENCEEND
OSNAP lisp function returns incorrect value for NWUCS MSPACE entities in Layout
[VBA] CAD crashes when you set the text to “TextString” property.
Record name duplication in AutoLayers table is not checked in COM interface
_DTEXT , left-click inserts text
Record name duplication in AutoDimensionStyles table is not checked in COM interface
Record name duplication in AutoBlocks table is not checked in COM interface
Incorrect behavior ARC / Follow option after erasing previously created ARC
PLATFORM sysvar is not supported correctly, it returns and empty string.
Text Middle-Center Justification issue
Polar does not work fine using a rotated UCS
I just ran an audit and had 16 errors. I ran again to fix errors and the crash report appeared
Insert fails when the file path doesn’t contains the extension
SAVEAS – Default Save As Format Option not honoured when FILEDIA Off
With ANGBASE=90, the rotation of the asixs is not correct
Issue during linetype typeing
Inserting Hatch problem
It is not possible to create an OdDbMaterial object via (entmake).
ICAD’s window becomes unfocused after turning the current layer off through the entity properties toolbar

 

Verzija 13.0.10.6

Ispravke i novine u verziji su:

Fixed save of position of toolbars.
Fixed a bug with 0 gap tolerance in hatch dialog.
Fixed property bar using visual styles from drawing not old visualization configurations
Fixed viewport ucsicon using ROTATE and INSERT commands
Fixed visualization of available commands in menu and toolbar customization dialog
Added “Open containing folder” command to window menu
Fixed position of UCSIcon changing viewpoint
Fixed some crashes on edit and creation commands
Fixed UCS bug with international options like _FRONT, _TOP, etc
Fixed UCS II toolbar, added new buttons
Fixed crash using snap CEN on some surfaces
Improved cursor speed when esnap is on, grid is off and at least one image is inserted
Fixed illumination factor for Easyarch windows
Fixed the bug with BYLAYER color selection in DDEDIT dialog
Fixed the bug with layer rename while creating the layer with a group active
Fixed hang after problem editing grip of a polyline
Fixed plotting window specification with ORTHO ON
Fixed perpendicular esnap with UCS different from global
Fixed POLAR with UCS not world
Added esnap menu to esnap context menu in status bar
Fixed Ortho and Polar on first point
Fixed insert image into layout
Fixed Direct Distance Entering with grips
Added use of Direct distance entering using ETrack points
Fixed printing image with setting FADE(image property)
Fixed @ operator.
Improved Paper space esnap
Fixed the bug with LAYERS dialog on creating new drawing
Fixed freeze on QDIM command
Fixed the bug with GAP TOLERANCE in BHATCH dialog. Added a variable to remember the BHATCH dialog width
Fixed the bug with a horizontal line in the ruler in the MTEXT dialog
Fixed the bug with layer rename and implemented the assignment of a layer to a selected group filter
Fixed paper space esnap and improved etrack functions
Center snap is not detected is move the cursor to the center of a circle located in a viewport
PASTESPEC to have more choices when pasting region from Excel
Some snaps are not detected if enable Nearest and Extension snaps
Only two quadrant snaps are detected for a circle in a viewport
Nearest snap glyph is not displayed if enable Nearest and Parallel snaps
Wrong snap is detected if enable parallel, intersection and tangent snaps
PEDIT -> Edit vertices, glyph does not show until mouse is moved
Fixed DIMRADIUS on TTR trimmed circle get dim text mirrored
When Autocomplete feature is enabled – it may cause to impossibility to choose the drawing in file dialog
LIST should display the material if it is not By layer
unable to define a circle specifing its radius (inches value)
Entities doesn’t appear after undo of hide layer using Explorer
MASSPROPIncorrect “Bounding Box” field’s value after saving
VPLAYER to support wildcards in layer names
-Layer does not print a message when trying to freeze the current
Fixed creation of an OdDbMaterial object via (entmake)
Fixed crash in ESNAP on polyline during ROTATE and view rotating with CTRL+Mouse
LISP – Not equal [ /= ] does not work properly in case of lists
Graphic disappears if run 3DORBIT and grab left/right circle on the rotation sphere
Fixed Crash during print
Fixed MTEXT tabulation in MTEXT editor
COPY command with enabled ortho creates wrong entity
STYLE command can lead to deadlock and data loss on Escaping
ATTEXT – Cannot extract attribute data from a dwg.
With esnap extension can’t acquire etrack point using Mid
Pressing ESC on INSERT command ads returned code is RTNORM not RTCAN
Redefine existing block does not work properly
The TAG of attributes and AttDefs are not created in Uppercase
LISP (entget) doesn’t extract XDATA for entities in attached drawing
Changing the background color is not updated all open drawings

Kontakt

LIMIS doo
Veljka Dugoševića 89
22400 Ruma, Srbija.
Telefon: +381 22 210 13 22
Faks: +381 22 478 514
E-mail: office @ limis.rs
radno vreme: Pon÷Pet: 8:00÷14:30

Osnovni podaci

Poslovno ime: LIMIS DOO RUMA
Matični broj: 201 45 477
PIB: 104 326 503
Broj računa: 160-358241-16


Pratite nas

Da li nas pratite? Ako ne, bilo bi nam drago da budete povezani sa nama.

Kliknite na jedno od magičnih linkova:

Facebook
Twitter
Linked-In

Tehnička podrška

Naše osoblje Vam stoji na raspolaganju za sva pitanja vezana za upotrebu progeCAD-a.

Podrška>>

 

Mi koristimo kolačiće!

Dobrodošli na www.progesoft.rs! Ovaj internet sajt koristi kolačiće (cookies). Nastavkom korišćenja ovog sajta ste saglasni sa našom upotrebom kolačića.

Ukoliko niste saglasni sa upotrebom kolačića, možete odbiti zahtev, ali se onda može desiti da sajt ne funkcioniše kako treba.