Veljka Dugorševića 165 lokal 7, 22400 Ruma, Srbija

+381 (0)22 210 13 22 prodaja@progesoft.rs       

Ispravke u aktuelnoj verziji

Verzija 18.0.4.6 (14. jul 2017.)

speed_proge
Ispravke i novine u verziji su:

Added support to open Autocad 2018 files
Improved speed of draw of entities in large drawings (>5MB)
Improved speed of regen of 3d solid entities in shaded/hidden mode
Fixed ESNAP with layer OFF, now objects on OFF layer are ignored
Fixed print of PDF file with layer name containing round brackets
Improved print performance with pdf printer and layer enabled
Added checkbox to enable/disable layer in pdf printer
Fixed intersection esnap between polylines with some objects in draworder table
Fixed display and print of OLE objects in blocks
Improved speed of automatic Regen of OLE, Images, Xray objects
Improved speed of Highlight and selection of entities
Improved selection performance: improved update of style comboboxes
Improved selection performance: Improved update of viewport scale and HPLayer combo box
Improved selection performance: Improved speed of update of textstyle and dimstyle combo boxes
Improved object modified reactor to improve MOVE, COPY speed
Fixed SELECTIONPREVIEW with PAN and ZOOM
Fixed creation of dimension using esnap on overlapped entities
Fixed solid grip dragging with face having negative normal
Disabled REFEDITPREVIEW by default
Added check to avoid crash in layerwalk
Improved print of PDF in case of layer disabled
Fixed face grip edit for compatibility with AutoCAD 2018
Added check to avoid exception in viewport scale combo
Start „PEDIT“ on double click on 3D Polylines instead of „PROPERTIES“
Added advanced render uninstall request at uninstall time
Improved layer palette
Make layer list font 1px bigger
Improved layout and colors
Fixed click of editbox into list to allow the click and related features
Fixed dragging/editing
Fixed selection of font drawing an MTEXT
Fixed crash with angular dimension of polyline
Fixed crash using font substitution dialog
Fixed save of HPLINETYPE variable
Fixed key tip for application button
Fixed size of print stamp
Added message starting POINTCLOUDATTACH command
Added ETRACKPRIORITY variable and relative tooltips to the settings in „Coordinate Input“ tab (Entity Snaps) and in „Dynamic Input“ tab
Fixed COPYCLIP and PASTECLIP of corrupted ACIS solids with bad materials assigned to subentities
Improved SELECT ALL performance to do a single highlight
Fixed architectural units in Korean command line, fixed when options contains ‘()’ for capital letters
Fixed dynamic input with imperial units without specifing ‘“‘
Fixed SWEEP command in some cases
Fixed draw of BOX with NWUCS
Improved switch between drawings, removed useless resize of non active view
Fixed printing JPG using pc3 of our jpeg printer
Fixed SELECTIONPREVIEW with dynamic input on
Fixed priority of dynamic input over polar tracking, Added ETRACKPRIORITY variable to set priority of ETRACK over dynamic Input
Added font support in copy and paste from Excel
Switched Center mark, center cross icons
Changed icon into profile export mask
Added „Center mark with settings“ to the ribbon
Fixed error in placing Label for EasyArch
Fixed imperial units in text height combo
Leader changes moving all drawing
Fixed command line options with ‘()’ for far-east languages, Fixed underlined part
Added single selection mode to JOIN command
Fixed Command line message crating a new profile
Fixed crash in OVERKILL command with dynamic input
Fixed JOIN command to join lines in different directions, removed source line on success
Removed grips and selection from deactivating document
Fixed crash in MOCORO with unsupported objects
Fixed exception in sds_getkword function with Dynamic Input
Fixed EXIT command after undo of REFEDIT session
Enlarged some combo in Dynamic Input tooltips configuration dialog
Changed the default colors (for LAZ files without RGB data) when importing a laz pointcloud file

Verzija 16.0.10.23 (21. januar 2016.)

Ispravke i novine u verziji su:

Updated ALL Amyuni driver files to 5.0.1.9
Fixed print and preview of images
Disabled resize of edit dimension style dialog
Fixed LISP vlax-ename->vla-object and (vla-get-activedocument (vlax-get-acad-object))
Fixed FROM esnap with NWUCS
Fixed „Autor“ in dwgprops command
Fixed a probably NLM thread gosthing with Windows 10
Fixed creation of spline from VBA
Fixed elevation of hatches in NWUCS
Fixed stack/unstack selecting last characters in mtext editor
Fixed entity type used by vba for ExternalReference and added Path property to Block object
Fixed update of dimensions changing scale factor
Fixed HATCH command selecting 2D polyline as boundary
Fixed MTEXT dialog context menu to enable Stack/Unstack menu item also with ~ # ^
Fixed VBA IsXref function
Fixed edit of hatch with USER defined style
Changed HPANNOTATIVE default value to 0
Added set of FONTALT variable with Far East languages
Fixed print with TTC fonts (like mingliu.ttc)
Fixed command DIST in layout if don’t pick point by esnap
Updated OneDrive detection
Fixed use of right click and osnap PER/TAN when dynamic input is active
Fixed FROM with dynamic Input
Added Autocad LT and ProA clipboard formats
Implemented „Embed TTF“ and „TTF text as geometry“ in PUBLISH
Fixed first time use of ETRANSMIT
Fixed display of additional file in etransmit dialog
Changed „Insert“ to „Block Reference“ in QSelect dialog
Fixed East Asian characters input
Fixed etrack with Direct distance entering without dynamic input, now pcad takes distance from active tracking point
Added check to avoid crash in property palette
Fixed huge memory usage in FULLRENDER command
Fixed update of viewport scale combobox and update of viewport selected moving focus from combo
Added question to append or substitute menu, toolbars and aliases
Fixed selection after ACIS load fix

Verzija 16.0.8.17 (07. avgust 2015.)

Ispravke i novine u verziji su:

This version has some fixes some issues with Windows 10 such as: icad.exe remains in process after close of progeCAD reactivation of PDF/JPEG printer, after Windows 10 update some client lost the activation

Verzija 16.0.8.14 (27. jul 2015.)

Ispravke i novine u verziji su:

In this release, there are few fixes from previous release which resulted in few crashes

Verzija 16.0.8.7 (16. jun 2015.)

Ispravke i novine u verziji su:

Fixed POLAR on ROTATE command after reference option
Fixed problem with redrawing
Fixed ESNAP on ACIS objects in blocks
Fixed crash with esnap on ACIS
Fixed UNDO after SHIFT to enable ortho
Fixed crash that may occur saving state of toolbars while closing progeCAD
Fixed bug reading PRG files
Fixed -HATCH with NWUCS
Fixed input linker option for QSelect project
Fixed dynamic block name and added length filter for some entities
Improved some specific commands during multiple lisp command
Improved speed of multiple lisp command with dynamic input ON
Fixed AREA command with architectural units (exchanged inches with feet)
Fixed Area prompt for architectural units
Fixed enable/disable of menu using variable
Added layer state to layer combo
Updated a few EasyArch objects to fix some measurement errors
Fixed update of layer dialog when is opened but collapsed
Fixed IcEditorReactor to send lispEnded on top level lisp command
Removed message on DIMENSION command during LISP or SCRIPT
PDF 3D: Tuned tessellation to 25 instead of 0, to reduce the PDF size
Removed message on JOIN command during LISP or SCRIPT
Disabled property palette and layer palette refresh during lisp or command to increase speed of LISP execution
Fixed crash during layer list reload operation
Dynamic Input: Improved speed of lisp procedures with many commands
Removed message on LINETYPE command during LISP or SCRIPT
Fixed clear of excessive layer filter, improved filter load, avoided load of layer data when layer palette is closed
Fixed Unload of raster images to unlock file
Fixed load of ACIS from other cad drawing
Fixed EXPORTPDF to show only PDF format in file dialog
Dynamic Input: Fixed EXPORT options and prompt string
Added check in layer palette and variable USELAYERFILTER to enable/disable layer filter in layer combo box
Added set of current FILTER in layer dialog
Added FILTER to layer combo
Fixed SWEEP command sent using lisp and selecting entities using lisp variable
Added 3dFace to SOLPROF
Fixed surface in FLATSHOT/SOLPROF
Fixed crash closing progeCAD
Dynamic Input: Added check to avoid prompt window in script or lisp
Fixed SWEEP after UNDO
Fixed POLAR with DynamicInput and NWUCS
Fixed imperial units distance that contains spaces
Added dialog to FLATSHOT
Fixed lost of width of columns in layer dialog changing document or active space. Added save and load of columns width between sessions
Improved load of extruded ACIS (fixed only if they come from progeCAD)
Improved command hint manager for not existent commands
Fixed ROTATE3D X/Y/Z options in NWUCS
Fixed command hint edit to starts a command quickly. Added AUTOCOMPLETEDELAY variable to change delay of list showdown
Fixed WEDGE length option in NWUCS
Fixed BOX with negative length width and height
Fixed MIRROR3D in NWUCS
Added support of some visual styles to property palette
Implemented SHADEDGE variable drawing ACIS in Shaded mode
Fixed SHADE and HIDE command to set also correct visual style
Fixed ZOOM extent with only one point entity in drawing
Fixed mirror of hatches
Fixed creation of layer group filters
Added context menu to DYNUCS status bar panel

Verzija 16.0.6.6 (23. april 2015.)

Ispravke i novine u verziji su:

Fixed COPYCLIP between progeCAD and other software products
Fixed EXTRUDE of not closed polylines but with equal end and start points
Dynamic Input: Fixed SPACEBAR to change grip function
Layer Manager: Fixed creation of layer group filters
Removed wrong ortho glyph used with ETRACK on NWUCS
Dynamic Input: Fixed not allowed chars
Annotative Dimension: Added regeneration of annotative dimensions to avoid disappearance
Fixed BOX command starting from not 0 Z
Fixed update of angle with rotation in Z axis in VIEWCTL dialog
Fixed ROTATE3D X/Y/Z options in NWUCS
Fixed CONE/CYILINDER specify radius with Z point
Fixed creation of BOX by length in NWUCS
Fixed command WEDGE length option
Dynamic UCS: Fixed exception in some cases
Disabled OSMODE for command LOFT
Annotative blocks: Fixed assign of annotative scale after SAVE and re-OPEN
Annotative blocks: Added BLOCKSCACHE variable to disable cache of blocks
Annotative blocks: Fixed BLOCKSCACHE change removing automatic reload of current drawing to avoid hang
Annotative blocks: Added check to annotative blocks changing active annotative scale, if found pcad asks the user to disable blocks cache and reload drawing
Added check to avoid useless and slow set of pdf printer margin
Fixed JPEG printer
Fixed LOFT command. Now it accepts parameters from LISP
Fixed crash/exception saving (also autosave) drawing with thumbnail
Fixed save of last used path to allow to set it by external IRX
Fixed lisp PRINT and PRIN1 with „\\“
Fixed FILLET command of a closed polyline
Fixed FLATSHOT and implemented dragging of created blocks
Fixed error when autosaving a 2013 drawing
Dynamic Input: Fixed CONE, SPHERE, CYLINDER commands typing diameter instead of radius
Added new contextual menu items for viewports. „Viewport Clip“, „Display Viewport Objects“ and „Display Locked“.
Command VPORTS : Fixed ON/OFF for option Lock
Fixed ESNAP on ACIS with NWUCS
Dynamic UCS: Added dynamic UCS to CONE command and direction of extrusion
Dynamic UCS: Added Dynamic Ucs to WEDGE command
Dynamic Input: Fixed NNx and NNxp annotation in ZOOM command
Fixed extrude command with mouse direction and esnap
Fixed a wrong option in the ucs menu
TBSIZE variable set to readonly
QLEADER position error (with modified ucs)
Fixed specify of height of CILYNDER depending from mouse direction, ESNAP or ORTHO 3d
Fixed specify of height of BOX depending from mouse direction, ESNAP or ORTHO 3d
Dynamic UCS: Fixed Cylinder command with dynamic UCS
Changed the saving version parameter for command line
Fixed freeze with files with OLE objects
Removed colon at the end of EasyArch object’s attributes in the edit object mask
Cloud: Fixed save to cloud without fonts
Fixed INSERT command setting angle with keyboard and POLAR
Fixed Missing Arc Aligned Text label in QSelect
Fixed ROTATE command setting angle with keyboard and POLAR
Added some check to avoid exception in NCOPY
Fixed DWGPREFIX and DWGNAME variable for files in 2013 format
Dynamic Input: Fixed dimension pointed lines scale in imperial/metrics drawing
Dynamic Input: Fixed height of text in dynamic dimension in drawing if current text style has fixed height
Dynamic Input: Fixed FLATTEN prompt for options
Dynamic Input: Moved dynamic controls away from cursor position
Dynamic Input: Fixed prompt text of command TEXTMASK and MOCORO and various messages in express
Dynamic Input: Fixed display of unselected text in dynamic control
Dynamic Input: Fixed draw of caret in active edit control
Fixed Hatch of dynamic blocks
Fixed BREAKLINE command in NWUCS
Dynamic Input: Fixed PAN and ZOOM during selection in localized version
Dynamic Input: Fixed cursor on mandatory option list after select (PEDIT, IMAGECLIP,…)
Removed grips from solid face perpendicular to view direction
Fixed position of tooltip of ESNAP/ETRACK/POLAR
Dynamic Input: Fixed RAY and XLINE input
Dynamic Input: Fixed reset of value in GetString mode
Dynamic UCS: Fixed dynamic UCS during RTPAN/RTZOOM
Fixed the „File“ menu when closed all documents
Dynamic Input: Fixed display of dynamic input controls after RTPAN in REVCLOUD command
Dynamic Input: Fixed display of selection set coordinate controls after RTPAN
Dynamic Input: Fixed options in RASTER commands
Dynamic Input: Fixed update of controls and dimensions using only keyboard

Verzija 14.0.10.14 (28. oktobar 2014.)

Ispravke i novine u verziji su:

Fixed: MTEXT format gets corrupted after editing
Fixed: Ortho is not working when select an entity
Fixed: Extrude error – Wrong EXTRUSION by path
Fixed: sds_getpoint is not showing message for invalid input
Fixed: MENU path is not deleted from search paths
Fixed: Paper size is reset when printer is not found
Fixed: Crash during switching layouts
Fixed: FILLET creates bad fillet when FILLETRAD is greater than possible arc’s radius
Fixed: No preview while creating a spline
Fixed: FLATTEN command missing output
Fixed: Crash on exit after some operations with Drawing Explorer
Fixed print and preview of „\U+XXXX“ unicode texts
Fixed DIMORDINATE with INTERSECTION snap
Fixed ARTGR + E for Euro symbol in mtext dialog
Fixed etrack with additional angle setting
Updated pdf2cad
Fixed check of large double number
Fixed problem saving in R13 version
Added color button to snap aperture panel
Added button to open explorer in printer styles window
Disabled ESNAP with SNAPGRIDLEGACY set to ON without active command
Fixed DELOBJ variable with SWEEP command
Fixed sweep object after regen
Fixed crash with esnap on ACIS
Fixed REVOLVE command to remove selected objects (path and revolved objects)
Fixed DIST in PSPACE viewport clicking on polyline
Fixed eattext dialog with languages different from eng
Fixed exception moving sphere with grip with SOLIDGRIPS ON
Fixed GRIP with NWUCS
Fixed right click and ENTER to terminate grip edit
Added CTRL to copy entity using grip
Added multiline mode
Fixed HATCH dialog, now it reloads custom and user defined patterns
Selected by default the default Profile
Disabled export button for default profile
Fixed load of pc3 settings, use paper size from dialog and B/W vs color
Fixed drawing open with nested xref
Fixed: When dragging line/polyline vertices by grips, elevation is reset to current ELEVATION value
Fixed: Toolbars rearranged wrong when there are empty spaces between them
Fixed print unexpected error: DirectoryFull
Changed default of SOLIDGRIPS to 1
Restored _GOTOFAQ command
Fixed ORTHO in Z direction
Fixed WEDGE command with ORTHO ON
Fixed crash changing main dictionary in SPELL dialog
Fixed insert table from CSV comma separated
Added all dictionary to installation folder and set default dictionary
Fixed order layers color
Enabled _EDITLEN Icons
Fixed linetype combo box
Fixed EXPLODE command for polyline and nested blocks
Fixed command line HATCH command to select entities from floodfill algorithm
Fixed speed of hatch algorithm
Fixed lost of focus for command hint list
Fixed open of read-only DXF files version 2013
Fixed problems with zooming out when one of the viewports in Layout is very small
Fixed wrong extrusion following a path
Fixed: If a line is drawn after Zoom-In to the limit, then the line disappears.
Fixed: Inverted RGB colors during the PDF EXPORTATION
Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
Fixed: Setting „Recent drawing list size“ (NFILELIST) to 0 leads to ICAD crash on drawing opening
Fixed: Fixed hatch boundary algorithm with overlapped edges
Fixed context menu with old menus read from registry
Fixed EasyArch stair construction bug when changing to meter units
Fixed color string in General property panel
Added support to the Large Buttons
Added 3D Box properties to property palette (only reading of geometric values from object, cannot modify yet)
Fixed wrong sentence in table properties
Added CTRL+A to layer property palette
Fixed Table creation dialog to store and reuse data
Fixed edit using 3D solid grips and improved performances
Fixed LOFT command removing „construction“ solids
Implemented PDF/A for PDF printer
Fixed QLEADER removing „flash“ at 0,0 starting jig
Fixed mtext option in QLEADER command
Fixed Alignment of MTEXT in QLEADER command
Added support to Multiline attribute in EATTEDIT dialog
Added icedEditMTextInteractive to IRX
Fixed crash in BATTMAN dialog changing TAG of attribute definition
Fixed stretch of Hatches to maintain associate objects
Reset previous selection starting STRETCH
Fixed STRETCH command with HATCH
Added option to preserve thickness values into DOCFAEXPORT command
Fixed memory loading accelerators
Fixed EXPLODE during refedit session
Fixed DIMCONTINUE command on paper space viewports
Implemented frame around text of QLEADER
Enabled scrollbars during dragging operations (LINE, MOVE, COPY etc…)
Fixed some texts in crashreport dialog
Fixed boundary finding procedure with overlapped edges
Improved hatch area algorithm with non visible boundaries, removed UCSICON and GRID enable and disable
Fixed hatch boundary algorithm to find the right way to close a path
Fixed QSELECT with custom objects
Fixed bug footer constrain
Fixed many errors with a VBA that opens and closes multiple drawings
Fixed area of hatches and added Area property in VB
Fixed Hatch with blocks and strange geometrics problem to decide if a point is outside a polygon
Fixed COPYM command with ACIS objects
Fixed COPYM with measure option
Added vl-load-com lisp function
Fixed crash that occurs while loading user folder with specific drawings
Fixed ACIS solid corruption after closing and re-opening a drawing
Fixed TRIM command for 2D and 3D polyline
Fixed print preview. In some circumstances, vectorization was failing and some items were not visible
Fixed erroneous random generation of icadplot.log file
Fixed zoom extension issue with splines having overlapping points
Fixed custom icon that was causing error messages
Added some controls to palette features to avoid crashes
Fixed occasional crashes while opening some files
Fixed polyface mesh that were not displayed

Verzija 14.0.8.19 (9. jul 2014.)

Ispravke i novine u verziji su:

Few major fixes of handling some specific DWG files

Verzija 14.0.8.13 (2. jun 2014.)

Ispravke i novine u verziji su:

Implemented new BATTMAN dialog

Added start up dialog
Changed ETRACKDELAY to 200 ms
Fixed erroneous behavior after resuming the PC from a sleep state
Fixed crash displaying some tiff on windows XP
Changed default for OSMODE and AUTOSNAP to enable POLAR, ETRACK and esnaps INT,END,CEN
Fixed COPYFULLPATH command to empty all other clipboard data
Fixed open of DXF files version 2013
Fixed changes of ALIAS with command hint list
Fixed ‘vlax-ename->vla-object’ for spline and leader objects
Fixed RGB inversion – Inverted RGB colors in during the PDF EXPORTATION
Fixed palette set in B/W images
Fixed BLOCK dialog with block names with ‘,’
Improved speed of layer palette changing layer’s properties
Improved LAYERP logger procedure to avoid save and delete of temporary layer state
Disabled ExportPDF3D command when no drawing is opened. Disabled DwgProps command when no drawing is opened
Fixed exception in LMAN with specific drawing
Fixed DATE variable now returns local time
Fixed PUBLISH with spline objects
Removed main viewport from selection set selected by QSELECT to avoid problem in case of erase
Fixed dcl crash with (mode_tile „xxx“ 2) before (start_dialog)
Fixed PDF2CAD without open drawings
Fixed update of linetype combobox
Fixed crash while moving entities in a specific drawing
Fixed: VBA – Block.AddItems() should not change block origin to (0,0,0)
Fixed: Center snap is incorrect for some entities if elevation is different from zero
Fixed: OSNAP does not work on PDF underlay
Fixed: Export a drawing with images to PDF creates huge and corrupted pdf
Fixed: Cannot set Window Print Area when Command Bar is floating
Fixed: ZOOM Extents zooming incorrect on blocks with more than 59 entities
Fixed: Tollbars position is not stored properly
Fixed Crash on startup
Fixed dwgname in DWGPROPS dialog, tab tooltip and OPENFOLDER command for dwg with 2013 format
Fixed bad memory release with monochrome images
Removed error messagebox during creation of toolbars and replaced with log
Changed DRAGDETAIL variable to 0 to fix problem of dragging (MOVE,ROTATE) of objects at large coordinates
Improved EXTRUDE and REVOLVE command with multiple select
Added unknown object types to QSELECT dialog
Fixed stretch to move hatch
Fixed creation of new menu items from customize dialog
Fixed height of text pasted from LibreOffice/OpenOffice tables
Added DEL button to remove layout from PUBLISH dialog
Fixed import of plot settings using PUBLISH, now it displays also inches unit
Added more items to tab context menu and implemented missing commands
Fixed localization of EXPRESS module
Fixed Red and Blue inversion in PUBLISH of PDF
Fixed PUBLISH of bitonal images
Fixed Extrude command: enabled multiple selection
Edited profile editor option dialog, changed default profile enable/disable buttons
Added reset all profiles button. Removed multi-line selection
Added check to avoid crash for buffer overrun
Added check to avoid crash from layer palette
Reduced size of pdf produced by PUBLISH with great images or clipped ones
Reenabled GDAL to manage TIFF to insert GEOTIFF images
Fixed DBMOD state on some drawings.
Fixed PDF printer code with the JPEG and TIFF modules enabled
Added NEXTLAYOUT and PREVLAYOUT commands to manage CTRL+PAGE UP and CTRL+PAGE DOWN accelerators
Added check to avoid exception in property palette
Fixed display of scientific number with DIMZIN to suppress trailing zero
Fixed scale of image using property palette
Fixed double click on table to edit, now it doesn’t start anymore PROPERTIES command
Fixed: DXFOUT command locks its output file
Fixed selection of „Multiple“ in QSELECT element type combo
Fixed draworder in text mask command
Fixed some problems on EasyArch 3D
Fixed access violation on creation of solid text mask.
Fixed BLOCK dialog creating block in wrong space when TILEMODE=0 and CVPORT>1
Fixed a bug on EasyArch 3D zmove command
Fixed PSELECT command to select entities for property palette
Fixed shortcut key to call „From“ esnap in Esnap context menu
Fixed UCSNAME display in property palette with standard UCS (FRONT,BACK,RIGHT,LEFT…)
Fixed remove text mask
Fixed SOLIDGRIP with large coordinates solid and overlapping grips
Fixed property palette project to remove „active context“ exception
Fixed WBLOCK saving file without extension
Fixed attach of xref using -XREF, now it attaches full path
Fixed LAYLCK and LAYULK with XREFs
Disabled WCLOSE and WCLOSEALL during refedit session
Fixed order of combo in qselect dialog
Fixed commands REVSURF,AI_REVSURF,REVOLVE,TABSURF,AI_TABSURF,EXTRUDE,RULESURF,AI_RULESURF,LOFT. AI_XXX and XXXSURF commands create meshes, the other ones instead have MODE option to create ACIS surfaces or ACIS solids
Fixed some EasyArch 3D bug when using variable height walls
Added NONE option to ESNAP/OSNAP command
Fixed TDINDWG variable
Fixed name and tip of Revolved surface in property palette
Fixed visualization of solid surface with customized isolines
Added Revolved Surface entity in property palette
Fixed wrong hatch origin
Fixed Ungroup of multiple groups
Fixed PDF creation problem and fixed use of TFW file
Fixed SNAPGRIPLEGACY from list setvar
Fixed CRTL + grip drag on table objects
Fixed BLOCK dialog, now it reloads some data selecting a block name from list
Fixed DIMLINEAR with ORTHO
Fixed GRIP using keyboard shortcut to move selected objects
Fixed localization of „*VARIES*“ in property palette
VBA – enabled editing for tUpsideDown and tBackward options for text entity
Fixed cancel of discard of changes on REFCLOSE command
Implemented Import page setup button in page setup manager and added IMPORTPAGESETUP command
Fixed the errors when used custom unit factor
Fixed wrong wall calculation on ARC doors/windows
Fixed selection of blocks/attributes in EATTEXT dialog
Fixed unexpected change of zoom when you use the render in a perspective view
Changed the reference to 2DWALL and 3DWALL layers
Added new layers to EasyArch 3D to be managed with different colours
Fixed size of controls in PNEW dialog
Fixed separate option with TEXT inside hatching area
Added SPACe feature to cycle between grip functions
Fixed: AUDIT leads to creation of redundant text entities
Fixed: FLATTEN moves entity to current layer
Fixed Crash during print preview
Fixed: Shape names from SHX files should be handled as case-insensitive
Fixed: Unable to unload IRX
Fixed huge amount of ram used by a specific drawing
Fixed: (getorient) lisp function not working
Fixed: sds_getorient doesn’t accept E or N90E as input
LISP (entupd) and sds_entupd don’t update block reference if block was modified
Fixed „AutoSave drawing extension“ position in options dialog
Fixed AREA command. Now it uses LUPREC to print Area value
Fixed default value for FILLETRAD variable
Improved scale command on Table
Fixed command hint window: Added mouse right click management, added check in OPTIONS dialog and menu item in context menu over command line to enable/disable this feature
Increased dimension of a button in DIMSTYLE dialog to fit some languages
Fixed: MINSERT does not insert the blocks with the correct rotation with non-global ucs
Fixed underlined char in one EattEdit dialog
Added Standard Scale combo in property palette about viewport entities
Fixed search path of drawing converted from dwg 2013 format
Removed duplication of VL-LIST->STRING function
VBA – Implemented SliceSolid method
VBA – Implemented SetPaperSize method
VBA – Implemented SectionSolid method
VBA – Implemented CheckInterference method
VBA – Implemented Purge method
Cannot rotate entities at non-zero elevation when in non-plan view
Fixed Crash during zooming when grips are shown in PS viewport
Fixed print problem when LWDEFAULT is 0 (printed borders were shifted)
Fixed Snapping on 3DSOLIDS in Blocks
Cannot get Nearest snap point for line if there are some attributes in block under cursor
Fixed PEDIT JOIN d(erroneouse segment removal from the new polyline)
Fixed Error using MatchProp on the dimensions
Fixed: Cannot snap to the end of Splined Leader
Fixed: Different behavior using SOLIDEDIT command to extrude a face
Fixed: New frozen layer created by VPLAYER is not frozen
Fixed: Printing doesn’t work from shell commands
Fixed: LIST command doesn’t display bulge for last node in polyline
Fixed: Hatching of visually closed POLYLINE fails
Fixed Deadlock in ATTDEF dialog
Fixed: sds_sslength should set length to 0 in case of failure
Fixed: LUPREC shouldn’t affect scale values in IMAGE attach dialog
Fixed: Deadlock in CONVERTPSTYLES during recomputing HATCH boundary with HPGAPTOL=1
Fixed several crash changing color or deleting entities or at close time
Fixed problem plotting specific drawing
MTEXT is always created in World UCS
Entget does not return DXF 74 (and 73) group code from ATTDEF/attribute
MATCHPROP doesn’t work for viewports
Dimension „Fit“ and „Text Movement“ fields issue.
Fixed: Stretch grip from External application fails
Using (initget) with keywords leads to an error message with garbage symbols in case of entering empty string
Fixed: Cannot get node snap in xref drawing when PDMODE is not zero
Fixed wrong attributes order in BLOCK command
VBA – Fixed Crash on AppendItems
Fixed Issue in MASSPROP command (Centroid)
Fixed crash undoing a viewport creation or layout switch
Fixed DRAWORDER after copying incorrect
Fixed: LIST command doesn’t show attribute name
Fixed: Zoom extents doesn’t work when first opening a drawing
Fixed Crash in PURGE Reviewed
Fixed: RTDISPLAY must be ignored for custom entities
Paper size is not read properly from DWG
Wrong print preview using particular Printer Settings
Fixed Crash doing PAN
Fixed: Text is displayed wrong (paragraph formatting)
Fixed: WBLOCK, INSERT and OPEN command should have separate, their own paths for drawings
Fixed: Bad UNC paths in references cause severe delays
Fixed: Cannot switch to PSpace from Viewport by double click if „Print paperspace last“ is disabled
Fixed: Wrong TTF font is used for printing
Fixed: Viewport moves when „print upside-down“ is toggled on during printing
Fixed Copy/Paste crash
VBA : fixed activeLayout.GetPlotStyleTableNames property
Added resize feature in attribute selection dialog of EATTEXT command
Fixed menu commands for _refclose _save and, _refclose _discard
Fixed space header/footer text issue
Fixed property palette for polyline2d entities, added global width and fixed single vertex widths
Fixed drag preview of rotation inserting a block without moving the cursor
Fixed height property into QSELECT dialog for TEXT objects
Removed rename of blocks and attributes from EATTEXT dialog
Fixed position of sample text in font dialog
Fixed RENAME command that allowed to rename layer 0
Fixed some issues on dynamic block grip
Improproved table edit, now the enter key moves to the cell below
Fixed double click on corrupted drawings
Fixed order of layer filters
Fixed font in raster dialogs

Verzija 14.0.6.13

 

Ispravke i novine u verziji su:

Fixed PDF creation problem (big size) and fixed use of TFW file with TIFF images
Fixed ESC while inserting a block
Fixed cancel on discard of changes on REFCLOSE command
Normalized paths returned from (getenv \“ICAD\“) instruction
Solved the stairs total height for EasyArch 3D
Fixed the errors when used custom unit factor
LISP: Fixed arc option in polyline with rotated/moved UCS
Fixed total height for stairs in EasyArch 3D
Fixed a crash when repeating command in EasyArch 3D
Added new layers to EasyArch 3D to be managed with different colours
Changed the reference to 2DWALL and 3DWALL layers for EasyArch 3D
Fixed problem on REFCLOSE on a specific drawing
Fixed problem to compute boundary with intersecting areas
Fixed exception in hatch boundary findings
Fixed performance of grip edit of dynamic blocks and tables, also improved performance changing these entities from property palette
Fixed compute boundary procedure with closed objects
Added \“_\“ to express commands in menu and toolbar
Reworked \“Solids\“ toolbar that became \“Modeling\“ and changed some icons
Improved speed of getting information from PC3 using caching of papers detail
VBA, fixed vertex order for property Coordinates into object LWPolyline
PDF 3D. Fixed space header/footer text issue
Fixed open of some specific drawings with bad entities
Fixed crash during audit of files with bad layers
Fixed base reg path for profileseditor executable
Fixed Paste of table from excel or openoffice with diactitics
Fixed HATCH with NWUCS
Fixed freeze while selecting hatch area
Added help of render in pdf format
Deadlock in CONVERTPSTYLES during recomputing HATCH boundary with HPGAPTOL=1
Fixed reset of Scale List Dictionary
Updated PDF printer driver
Improved performance of TRIM and EXTEND and added message when boundaries are more than 10000
Fixed edit of external reference
Fixed REFSET (ADD option), TRIM, EXTEND, LIST, MATCHPROP to select objects outside refedit working set
Improved TRIM with ALL option without blocks
Fixed attribute height using AddAttributeDef from VBA
Fixed EXTEND and added capability to extend to block entities (also nested using variable TRIMALLMAXNESTEDBLOCKLEVEL)
Fixed TRIM ALL option using block, implemented TRIMALLMAXNESTEDBLOCKLEVEL variable that controls how many level of recursion for nested blocks
Fixed some issues about hatch command
Fixed crash from status bar
Wrong attributes order in BLOCK command
Changed pasteclip of table copied from libreoffice. Now it creates table entities
Disabled plot style item in EXPLAYERS when drawing uses CTB
Fixed select block button in EATTEDIT dialog
Fixed double click on block to edit attributes with NWUCS
Fixed memory problems hatching several areas
Fixed memory leaks in layer change logger (LAYERP command)
Fixed memory leaks in command hint window
Improved memory management with COPYCLIP
Fixed text height using AddText from VBA
Fixed update of color from VBA using ColorIndex property
Fixed exception drawing intersection glyph
Improved performance of boundary compute algorithm
Fixed Style option in MLINE command

 

 

Verzija 13.0.18.4

 

Ispravke i novine u verziji su:

Added some check to avoid exception in property palette and selection after ESC of gripedit
Fixed start of progeCAD from vbs, now it loads all IRXs
Fixed change of circle associated with a dimension
Added some check to avoid exception drawing UCSicon erasing some viewports
Fixed NLM server connection function
Fixed load of ANSI mnu file with some nordic characters (example :ä)
Added check to avoid crash in property dialog scrollbar sizing function
Improved speed of refresh property palette reloading layer combo values only if it needs
Changed a tooltip in PUBLISH dialog
Fixed tooltip of save and load publish list in PUBLISH dialog
Set HYPERLINKICON default to 0
Fixed Fylout position
Fixed the 256 color „Black“ button in background color selection
Improved speed of QSELECT command on large drawings
Fixed show of command bar when progeCAD was closed without it
Fixed viewport scale panning in activated viewport
Fixed the bug with the APPLY button of FONT dialog
Fixed the bug with grid color not changing in DDRMODES dialog
Fixed redefine of existing blocks
Fixed the bug with the impossibility of insert 3-digits true color in COLOR selection dialog
Fixed crash using BATTMAN command
Fixed some options in menu using international options adding „_“
fixed open of some drawings with some bad spline
Added feedback send for NLMServer token activation
Fixed crash while copying some entities between 2 drawings using specific format of other cads
Fixed crash using publish with Amyuni PDF/JPG printer
Fixed cone command with center of base with z != 0, fixed elevation after cone command is now restored to original value
Fixed DIMRAD and DIMDIAMETER command to dimension circle/arc inside scaled blocks
Added LAYERCLOSE command to close LAYER palette, added OLMSTATE variable to check if layer palette is open, Added ability to CTRL+2 accelerator to close layer palette
Unable to join using „_pedit“ command, lines disappear
Fixed close of floating toolbar
Added MNU update mechanism
Restored APBOX default value to 0
Added CTRL+RETURN to close MTEXT edit dialog
Fixed SELGRIPS command when are already selected some entities
Added try and catch to avoid deactivate activation context problems
Fixed crash on double click on mtext after close of a drawing
Fixed VBA FontFile method
Fixed EXTRUDE command preselecting entities
Fixed plot from VBA setting parameters
Added check on MTEXT dialog
Different direction of extrusion using polylines to make rectangles
Restored new OPEN common dialog
Fixed right click context menu
Fixed intersection of etrack/polar alignment lines
Fixed Etrack/Polar in NWUCS
Added server ip and port to the command line of NLMServerMonitor
Changed status bar and CTRL + 2 to call LAYER command instead EXPLAYER
Fixed change of description of layers in layer dialog
Fixed layer dialog restored display of latest columns values
Added command line xml report to NLMServer and NLMServerMonitor
Fixed message during RECOVERYMANAGER command during load of some drawings
Fixed problem on WBLOCK dialog selecting file name
Fixed starting color of hatch taking active one
Added MLSTYLE command to custutils project
Changed the menu loading procedure in order to accept UTF-8 files
Added check on MIRROR command to avoid regen if only one entity is affected
Fixed conversion problem in property dialog
Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
Fixed icGetColorDialog to get also RGB and colorBook colors
Changed PreviewEntity control to support multiple entities preview
Changed icDrawEntityToDC to icDrawEntitiesToDC to draw multiple entities on a DC
Minor change to layer dialog getting wrong plot style from API
Added ability to set plot style to layer from layer palette
Added icGetPlotStyleDialog to IRX interface to select Plot Style
Fixed command after VBA.InsertBlock
Fixed preview control preview image was upside-down
Added ADDFORM command to add customized paper size to some printers (our PDF,JPG and some others)
Added preview control in create table dialog
Added CEntityPreview control to display an entity in a control
Added icDrawEntityToDC api to draw an entity to a DC
Fixed icdbLoadMlineStyleFile function to load a file twice and fixed reading of angles in grads
Fixed load of multiple style mln file with a specific requested style
Fixed an error on EasyArch dcl
Fixed load of specific MLSTYLE from a file
Fixed icdbLoadMlineStyleFile function to load multiple MLINE style
Fixed PDF printer with custom paper size
Added message on command REFCLOSE when it fails
Fixed load of layer combo in property palette to increase speed of common operations (ZOOM/PAN)
Fixed layer palette that slows down LAYISO command on large drawing. Improved refresh of layer palette adding a timer to stack all refreshes
Fixed load of UTF-8/UNICODE toolbars
Adjusted Table compilation for EasyArch2d
Fixed linetype combo box, now when is selected some entities it doesn’t change active linetype
Fixed Plotter manager dialog with our PDF/JPG printers
Fixed LMAN dialog creating a new state with a drawing with a group or a filter of layers
Fixed print of text with ISOCP,CALIBRI,PALATINO TT fonts
DDEDIT changes justification of text
progeCAD color dialog should be used in Print Style Table Editor instead of Windows color dialog
Wrong value is displayed for snap rotation („SNAP -> Rotation“ command)
Crash on opening TEXT editor
When PRINTTEXTOUT=1, xref clipping doesn’t work properly for printing
Alternate Font is not used for missing truetype fonts
Cannot create hatch in active viewport
Cannot import PGP file with TAB
cannot use esnap NEAR with „little“ (radius ~ 0.1) circle
Cannot use snap INT with MLINE entities
Many problems using ssget from lisp (or SDS)
VB function GetObject, after CreateObject, doesn’t work
Wrong range and default value for FIELDEVAL variable
crash moving between model space and layout 1
Image command
SelectOnScreen doesn’t highlight entities during selection
VBA Hatch.ApplyHatch is not implemented
Mouse movement is slow while a command is active in heavy drawings
_refedit command: need a message before block editing
-IMAGE – Detach removes IMAGE entities instead of IMAGE definitions
Ability to turn off real-time Orbit and Twist (by Ctrl+Click) is required
ACISOUT cannot create ACIS SAT file other then version 700
ACISVER doesn’t return correct version number of ACIS.
Activating Antialiasing produce a section (not desired) in the rendered objects
Add cut/copy/paste features to MTEXT documentation
AddVertex doesn’t work
ArchT Hangs on Autosave Comment: Main engine thread allows process send messages during execute UI actions now.
Assertion is shown when attempt to detach a XREF
Association doesn’t work for Aligned Dimension
AttachExternalReference method of Modelspace fails
Attempt to open any drawing in icad.lsp, *.mnl or in other startup sequence member leads to incorrect behavior
ATTEXT issue
Bad print style file results in improperly handled condition.
Block changing position during Zoom operation
Cannot attach image files different from jpeg using progeCAD Explorer
Cannot create Wipeout via (entmake) properly
Cannot do center snap to arc segment of closed polyline
Cannot control Osnap tooltips properly
Closed method on LWPolyline doesn’t work
Context menu does not allow to copy more than 100 selected entities
Context menu imported from MNU file always shown in main menu
Context menu is opened with some delay if select a lot of entities.
Context menu on RMB is much too big. It is very confusing and overwhelming
Crash in EXPLORER during erasing layers (Win8 only)
Crash on saveas in particular drawings
Crash right after calling CONVERTPSTYLES
Crash when entity selected on the previous drawing is modified on a new drawing
Cursor slows down with „selectionpreview“
Deadlock in OpenGL on progeCAD start
DIMDISASSOCIATE command doesn’t work
Dimension on block
DIMRADIUS issue on object with Z <> 0
Direct entry of Unicode codes does not work in MTEXT dialog
Document use of commas for aligning text in headers and footers
DRAGNDROP doesn’t work for attached drawing
Improvement in DRAWORDER performance
During SELECTIVEREGENMODE=0, out-of-view raster image disappears when regen is performed
DWG association with progeCAD doesn’t work on some machines
Entities from nested XREFs are not visible in Layout
Entity goes to bad state by DEL command with enabled SELECTIONPREVIEW (3) and HIGHLIGHTLIMIT>0
Entity snap glyphs are not displayed if launch progeCAD and create or open a drawing
entmake for blocks always calls Regen
Entmake should create a entity specific handler for as many entities as possible.
Error during the image editing with the ORTHO function ON
(acad_colordlg) if flag=nil to disable ByLayer/ByBlock, the „Black“ button returns 256
(ssget „ALL) does not work
[Crash] Cannot FLATTEN a leader
[Crash] Crash on open – problem with Activation Context
[CRASH] Deleting viewport causes crash
[Crash] progeCAD crashes sometimes on drawing closing when it occurs simultaneously with RealTime view change
[ENTPROP] sorting layer list
Excel document cannot be inserted
Exception if UNDO after REFCLOSE
Exploding blocks causes draworder change
Failed -DIMSTYLE command ANnotation option
For attached drawing – polyline is not drawn at the top of other entities during selectionpreview
General issue of calling commands from explorer
get_ProductOfInertia COM method is not implemented
GetEntity, GetInput and keywords do not works
progeCAD doesn’t set proper SDS function code when SDS function is registered by sds_regfunc
progeCAD occasionally crashed when exploding a block
ICADDoc.lsp is not called in case of run progeCAD by opening .dwg in explorer
icedGetPoint does not show pointer properly
icedSetCurrentView doesn’t refresh temporary graphics
If MNL file for some MNU contains MENULOAD command call, corresponding MNL file won’t be handled if it contains LISP (command) calls
-IMAGE -> Detach removes image entities instead of image definitions
IMPORT PGP function fails in ITALIAN language
INSERT command crash block has attributes and ATTREQ=1 and ATTDIA=1
INSERT command disable scale y and x field when user choose uniform block
INSERT command rotation default value use AUNITS and AUPREC
INSERT object disappears after closing the „progeCAD Explorer“
Inserting a Block with const attdef make wrong data
Issue in PRINT operation with WINDOW option
LENGTHEN command for polylines changes entity Layer to current
LISP ssget filter 430 set wrong selection set
LIST command does not display bulge for last node in polyline
List of blocks is not displayed in progeCAD Explorer if open any drawing with blocks
Fixed MASSPROP issue.
Middle mouse button should activate PAN command.
Missing paper rectangle on layouts
MNL scripts are not loaded properly when several drawings are opened at once
MTEXT entities are shown incorrectly in attached drawing
multiline text change position
Nearest snap overrules the grid and Ortho function
Need to implement context menu for options->paths settings.
OSNAP markers are not visible when used for entity filled by the same color as snap markers
Parallel snapping doesn’t work for XREF
Particular JPEG 2K image does not display in color as it should
Polar tracking works wrong in NWUCS – Extension snap works incorrectly in UCS for linear entities
PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
Print SCALED IMAGE problem
Print style table editor doesn’t release acquired GDI resources
progeCAD doesn’t recognize the coordinate position in the MNU file
Refedit command is limited at the first two block levels
Rendering does not work with perspective ON
Right click pop-up menu option in drawing window to have recent commands
Right-click menu disappears if mouse is moving at the moment of clicking
ROTATE command does not take angle input in form 45°28’40“
RQXLOAD event not called everytime a drawing is opened/created
SDS function code can be corrupted by commands called from SDS_CBCMDBEGIN callback
sds_getstring return wrong string from script
sds_ssget() does not work correctly on off layers
Search path is growing when attaching XREF’s
SelectOnScreen doesn’t close selection
Size error when inserting raster image
Some polylines in attached drawing are not visible during Print Preview
SPLINEDIT layer issue
STRETCH doesn’t work correctly if polyline has 0,0,-1 normal
Style and Language fields are empty if create a new style using -STYLE command
STYLE command font problems
System variable PRODUCT must be read-only
The objects with thickness different from „0“ are not printed using its lineweight
The order of entities in the selection set is not consistent
The selection of the hatch area depends from the zoom level
The UCSVP variable has a strange effect on the height while drawing
The VBA entity creation doesn’t set Defaults properties
Toolbars can be lost (not restored) on restart of progeCAD
U.S./Imperial Units support for Export PDF
Unable to scroll drawing with specific keys
UserCoordinateSystems.Add, method does not behave correctly
Utility.Prompt doesn’t support new line character in the message
VBA – Entity.ArrayPolar() copy wrong space when TILEMODE=0 & CVPORT=2
VBA AddLeader method and Annotation property compatibility issue
VBA AttachExternalReference() have to check block Name is defined
VBA Block.AddItems always delete existing objects in the block
VBA ConvertArrayToPoints become Out Of Memory Error
VBA does not set object height as 0.0
VBA GetEntity cannot recoginize OdDb2dPolyline
VBA progeCAD Crash when set duplicated table record name
VBA Offset creates new objects but doesn’t append to Database
VBA selection set filter support more group codes
VBA Some AddXXXX() methods cannot create object into user defined block or inactive paper layout block.
VBA Utility.WildCardMatch is not implemented
VBA which functions returns E_NOTIMPL
VBA, New keyword only works the first time
WBLOCK/-WBLOCK fail silently when trying to write to an open file
When you place your cursor on the dimension text, snap point on the dimension line is obtained.
Wrong behavior if REFEDIT read-only xref
Wrong visualization in layout using an hidden view
XREF problem with GRADS
Xref reloader does not work

Verzija 13.0.16.21

Ispravke i novine u verziji su:

Fixed starting color of hatch taking active one
Added grips to entities selected via VBA.ActiveSelectionSet
Fixed command after VBA.InsertBlock
Fixed display of plot style in layer dialog
Updated Amyuni PDF Converter from version 4.5.3.5 to version 4.5.3.7
Localized some tooltips in hatch dialog
Implemented SetView function in VBA
Fixed Import and Export of DXF from VBA
Fixed VBA CreateColor parameter now uses RGB value
Fixed crash detaching not found xref
Fixed message during RECOVERYMANAGER command that stops load of some drawings
Removed progress bar from splash screen to avoid deadlock during startup
Added lock to avoid update of drawing during IRX load
Fixed problem on WBLOCK dialog selecting file name
Added check on MIRROR command to avoid regen if only one entity is affected
Fixed conversion problem in property dialog
Fixed .bak creation using only ISAVEMAK variable, removed MAKEBAK variable
Fixed icdbLoadMlineStyleFile to load linetypes used by mln file
Implemented VBA.PurgeAll method
Fixed icGetColorDialog to get also RGB and colorBook colors
Fixed Import and Export of DXF from VBA
Fixed an error on EasyArch dcl
Fixed VBA Export function to export DXF files
Modified the Sources sentences for PLINE command
Fixed problem on icGetLinetypeDialog api
Fixed collinear walls in EasyArch
Fixed print area including borders
Fixed perspective view render and render with antialias
Enabled print transparecy images
Fixed helpstring on status bar of flyout buttons
Fixed „Fractional type“ property for dimensions in property dialog
Fixed default value for REGENMODEGLOBAL to 0 to disable popup balloon during zoom
Restored „Select by properties menu“ to call Filter option and added „Quick select“ to call QSelect
Fixed localization of QSELECT command
Fixed right click context menu with a number of selected entities > of GRIPOBJLIMIT
Fixed RECOVERYMODE variable setting
Fixed creation of new UCS from VBA
Added old VBA.Workspace events
Fixed placement of docked toolbars imported from MNU
Fixed position of imported (from MNU) floating toolbars
Fixed EXTRUDE command. Fixed Extruded entities position and fixed region extrusion.
Fixed property palette alignment point for TEXT and ATTRIBUTE definition
Fixed mesh menus
Fixed some issues that could cause exceptions
Fixed QDIM with NWUCS
Fixed intersection snap between LINEs and MLINEs
Fixed crash selecting center osnap on some cylindric 3d solids
Fixed VBA SelectOnScreen to highlight selected entities, disable right click menu, command line message and cursor shape
Fixed PICKADD checkbox in options dialog
Fixed creation of a block with many entities from VBA
implemented VBA ApplyHatch method
Added redraw in Layer palette to force redraw of drawing after layer change
Alternate Font is not used for missing truetype fonts.
Fixed NEAR esnap when PARALLEL is active
Added Multileader,Image,Table and Multiline to QSELECT dialog
Fixed hatch dialog with dimension
Fixed hatch dialog and boundary dialog height
Fixed a problem with TRIM and rectangle selection set
Fixed VB GetObject taking an instance created using a previous CreateObject
Added ObjectModified, ObjectAdded, ObjectErased events to VBA Document
Fixed the dimensions of the imported Google Earth images
Removed control over the file name for the FONTALT into Options Dialog
Changed default FONTALT variable, from ic-simplex.shx to simplex.shx
Added TrueColor property to improve compatibility with Autocad
Added few properties and methods to VBA Document object
Implemented new VL, VLA and VLAX functions:
vlax-get-acad-object, vla-get-activedocument, vla-get-modelspace, vlax-get-property,
vlax-put-property, vla-get-count, vla-item, vlax-vla-object->ename, vlax-ename->vla-object,
vlax-curve-getpointatdist, vlax-sevice-print, vl-vbaload, vl-vbarun, vl-prin1-to-string,
vla-get-Height, vla-get-WindowState, vla-put-Height, vla-put-Lock, vla-put-Width,
vla-put-WindowState, vlax-Release-Object, vlax-safearray->list, vlax-variant-value,
vlax-Create-Object, vlax-get-or-create-object, vlax-getinterfaceobject, vla-delete,
vla-get-registeredapplications, vla-get-utility, vlax-curve-getarea, vlax-curve-getclosestpointto,
vlax-curve-getclosestpointtoprojection, vlax-curve-getdistatparam, vlax-curve-getdistatpoint,
vlax-curve-getendparam, vlax-curve-getendpoint, vlax-curve-getfirstderiv, vlax-curve-getparamatdist,
vlax-curve-getparamatpoint, vlax-curve-getpointatparam, vlax-curve-getsecondderiv,
vlax-curve-getstartparam, vlax-curve-getstartpoint, vlax-curve-isclosed, vlax-curve-isperiodic,
vlax-curve-isplanar, VlaxInvokeMethodProxy
Fixed crash when JPG printer is not installed
Fixed print of scaled image
VBA.AddVertex doesn’t work
Fixed QSELECT with only one command active
VBA :Fixed creation of hatches in an active viewport of a layout
Added QSELECT command to select options in command line
Fixed QSELECT dialog selection of circle by radius
Added Transparency property to QSELECT dialog
Fixed QSELECT dialog using some operators searching default DXF values (color, lineweight, linetype, linetype scale, thickness)
removed standard selection set menu items from CHAMFER and FILLET commands
Added mechanism to reduce memory footprint changing layout, it starts when REDUCELAYOUTMEMORY variable is ON and when used memory > 2GB or available memory is less than 70%
Fixed the bug with wrong image dimension ration during the ImportGEImage command with the Google Earth images
Fixed the bug with foreign command line keywords in IMAGECLIP command
fixed the bug with the activation of „Apply“ button in text style dialog
Added operator combo to QSELECT dialog and reworked layout
Fixed display of layout tabs opening drawings
Fixed DRAWINGTAB command to hide/restore drawing tab
Added UPDATEFIELD command to force update of field in texts
Fixed FIELDEVAL variable
Fixed a couple of minor Express bugs
Fixed some Express menu items
Fixed Zoom extension command and fixing UCS icon problem
Fixed recovery manager to manage also saved file by emergency crash system
Fixed crash changing layout
Fixed Emergency save output folder
Added some check on PDF2CAD destination, now progeCAD checks if the file already exists, right extension specified and output directory exist and has rights to write in
Changed CIRCLE TanTanTan menu command
Reverted the NEW command to ask always for a template file
Fixed color of icons in menu
Fixed hatch island detection (problem generated during last merge with ITC source)
Added „remove boundaries“ button in hatch dialog
Added message box to allow to user to show created PDF or JPG after print
Toolbars can be lost (not restored) on restart of progeCAD
Cannot select the correct grip of 3D line
Entity snap glyphs are not displayed if launch progeCAD and create or open a drawing
[CRASH] Fixed crash due to arithmetic overflow
When ORTHO is ON you can not draw ortho lines
Crash by selecting the line
OLE background color: added OLEBKGCOLOR and USEOLEBKGCOLOR
progeCAD hangs when open a xref from progeCAD Explorer
Rulesurf doesn’t work for closed entities
LENGTHEN command for polylines changes entity Layer to current
progeCAD freeze during the selection of 3d object in the attached drawing
INSERT is not working correctly when ORTHO is enabled and insertion point is specified on screen
[CRASH] Fixed many crashes
Missing dialog title and possible data corruption
Grip points of a new drawing are displayed in the previous drawing
SDS command calls from LISP leave CMDACTIVE in wrong state
Solid with applied material is invisible
Autosave improvements
[Crash] Crash in OpenGL on drawing open/close
Slow response to select the displacement for moving objects while a command(copy, …) is running
Improved support for naming of bitmaps in MNU files
If cancel insertion of a block, progeCAD makes UNDO
Offset error of 2Dpolyline
IcadDoc.lsp is not loaded if progeCAD is started using COM
Additional windows (views) cannot be focused / used
Polyline linetype is generated with different scale in progeCAD
[Crash] opening program
XML Toolbar with resource dll cannot show buttons
ssget works wrong when filter contains regapp
No line feed in setvar prompt
PLINEGEN variable doesn’t affect linetype generation for polylines
Prompt items are not correct in the -STYLE command
Entity disappears when it’s layer color is changed
Wrong stretch of an arc
3DSolid visualization issue
GRIPS=0 forces PICKFIRST on
An application must register with Default Programs feature to be offered as the default program in Windows Vista and later.
LISP (ssget) with filters prints wrong number of entities
DIMSCALE value is not applied to DIMCENTER
The hatch disappears after copying or moving it
-DIMSTYLE command doesn’t list dimension styles alphabetically
-STYLE command doesn’t list styles alphabetically
Stretch using grips and esnaps does not work right along the Z axis
COPYEDATA,MOVEEDATA,DELEDATA allow wildcard for source application id
Wrong visualization in layout (out of layout window and rotated)
Result of Perpendicular Osnap depends on Zoom Window
getcorner cannot return keyword like getpoint
Layers names are not in alphabetical order with -LAYER command
Error extruding the polyline in this drawing
EXPLORER delete linetype must not set layer’s ltype to Bylayer
Inconsistency in ‘lisp’ local variables
sds_dispobjs returns 2 vertices chains for PFACEs
Select all entities does not include entities from the viewports different than the current viewport
[Crash] Crash during panning in locked viewports
EXPLODE issue on REGION
SDS initialization/uninitialization RQ request codes usage for applications is wrong!!!
SDS callback deadlock
DIMRAD and DIMDIA silently exits if no entity picked
Entity snaps don’t work for a PlaneSurface
[Crash] Crashed when switching to Layout2 from Layout1 after dimensions creation
[Crash] 3D ORBIT
[Crash] Explorer dwg double click
[Crash] Attempting to open a new drawing using an existing template
Text dimension in edit text dialog (single line text)
Cannot to snap to grip points during grips dragging
ZOOM Dynamic does not work properly in NWUCS
(sslength) returns RTREAL
Command REVOLVE does not work when object started from revolution axis
Improved performance in canUndo() function
Critical issue during PC3 creation with plotter HP
Attempt to use HATCH leads to infinite loop for attached drawing
Insert HATCH problem.
WIPEOUT entites printed as black rectangles when named print style is used in attached drawing
Grip editing dimensions should be disallowed when UCS isn’t parallel to ECS
Different direction of extrusion using polylines to made rectangles
MTEXT editor to have ability to clear formatting
Unable to load a .mnu file from path with dot symbol
Transparent zoom window breaks getpoint jig dragging line
[Win8]“Could not start print job“ message displayed for printers configured on port FILE:
Incorrect tangent snapping to spline
PRIMARY UNITS SCALE for dimensions, doesn’t work in the layout
Do the alignment. Then, a Z coordinate is changed.
Right click pop-up menu option in drawing window to have recent commands
Fillets don’t always work for solids using coordinates not in WCS
Cannot save changes of REFEDIT session by REFCLOSE for test drawing
Entity is not redrawn when changed via Entity Properties toolbar
[Crash] Crash during changing color from Entity Properties toolbar
UNDO option inside Selection state of commands is extremely slow for big number of entities
LISP (initget) and sds_initget are not interchangeable
Transparent zoom window breaks getpoint jig dragging line
3dSolid is always rendered in grey color (entity material is ignored)
Unable to define a box with Z negative value
Crash on open after roundtrip in some scripts on Windows 8
CHSPACE creates wrong entities when there are twisted viewports in Layout
The icaddoc.lsp doesn’t executes propriety then opening few drawing at once
Improved performance of the RTPAN command
Entity tracking is not working in UCS
Member needs to know when 3DObit is active or not.
[Crash] Crash on exit in scripts which uses PDF underlays.
SDS_CBVARCHANGE notification is not called in all circumstances
Wrong area calculation for HATCH entities with holes (hole area is added, instead of being subtracted from the total)
„Pointer defaults to crosshairs“ should be enabled by default
Code for handling pface meshes is throwing with invalid index error
PEDIT is not working correctly for spline fit and curve fit pline
FREEZE / THAW switching is too slow
LAYOFF error
Apparent intersection snap leaves tracking points
Wrong behavior of Tangent/Perp/Quad snap in UCS
Quadrant snap doesn’t work correctly in UCS
during RTROT the mouse cursor should change to show appropriate orbit mode/constraints
Undo issue-One of all entities ALWAYS cannot be deleted After Delete & Undo.
Icon toolbar customization, confused
Review AllCOM failures and fix bugs or scripts
Some dimensions are updated incorrectly during COPY and EXPLODE of the block
Extension snap works incorrectly in UCS for linear entities
progeCAD doesn’t support Multiline Tooltips for Snaps
Image manager – image preview is black after an image is erased from the drawing
Show snap setting on cursor is not working right
Hatch vs Dimensions issue
progeCAD uses > 1.6 GB while plot preview and pdf is missing
Even if „Pointer default to crosshairs“ is turning off, Crosshair is seen
Cursor is reset to crosshair if display options dialog is loaded during active command
Block dimensions are moved in wrong places
Serious problem with DIMRADIUS / DIMCENTER on blocks
Pan command does not change cursor type
Object tracking does not work from lisp routine
Zoom Dynamic has several problems
Second crosshair appears and freezes after switching drawings by Ctrl+Tab
Resizing images by grip points works incorrectly
Missing SDS_CBDOCCHG notification when closing a drawing.
ZOOM command options are incoherent comparing POP UP and Command Prompt
Mouseover (SELECTIONPREVIEW) highlighting makes cursor very slow and jumpy when zoomed in on image in attached drawing
Extension snap is not working for elliptical arc in WCS and for all entities in UCS
Icad can’t extrude region on a closed polyline
OLE2FRAME disappears after redefining block
Grammatical mistake in the prompt while redefining block
OSNAP points are not implemented for SubDMesh entities
No linetypes are loaded by -LINETYPE command if .lin file contains some invalid data
-GROUP command creates only even unnamed groups
ZOOMWHEEL sysvar is treated as a boolean, instead of 0/1 value insinuating it turns zoomwheel on/off.
Parallel snap doesn’t work if enable Parallel and Extension snaps
„Select all“ button needs to be added to the Entity Snap Settings dialog
When app is loaded via Icad.sds the request msg SDS_RQXLOAD is fired before progeCAD is initialized
Images on OFF layers affect performace
progeCAD always uses the same CPU on multi-core systems causing performance issues when multiple sessions are run on the same machine
Cursor slows down with „selectionpreview“
Russian Linetypes with “ in definition do not load
Custom OSNAPs don’t work
ssget, viewports and layout
Sometimes AUTOSAVE doesn’t work when ICAD window is inactive
Linetypes loading is stopped as soon as linetype with unknown font is met in .lin file
ETRACK: Arc & Elliptical arc behave badly for _EXT osnap in non-world-UCS
The print preview does not show all the entities in the layout
Incorrect PERPENDICULAR snap to arc segments of PLINE in NWUCS
A new anonymous block can not be inserted if we tried before to add another anonymous block two times
[VBA] I can not create the DIMSTYLE.
MTEXT editor renders text very different from the drawing
Cannot enable more then one snap using the command line while a command is active
Disappearing blocks on large coordinates
JPEG image does not open
Bigfont load problem
Text string is not printed correctly in some cases
PURGE does not complete initialization on attached drawing
getPoint without base point is not working when ORTHO is enabled
ARC definition bug
progeCAD hangs if explore groups in a drawing with a huge number of groups
progeCAD hangs if display all groups in the Group dialog in a drawing with a huge number of groups
Sorting groups by name works very slow…
REVOLVE and UCS fail
Fixed occasional crash occurring during printing
Hatches are shown with low density in progeCAD
Deadlock if callback is called at the same time when COM Job is sent to Main Engine, which is waiting for Main thread
VIEWCTL command doesn’t works in the LAYOUT VIEWPORTS
If you execute an INSERT and press RMB then RTCAN has to be returned
Attempt to change image path in the Explorer leads to crash
IMAGE path updating functionality is not working
ICAD is deadlocked when sds_draggen callback performs any operation with dialog created by SDS app
DROP-DOWN COLOR LIST issue
Some entities in NWUCS are not being handled properly
Incorrect prompt if hatch area not fully visible in window
Crash in INSERT command
MIRRTEXT = OFF, Horizontal problem
PURGE command doesn’t delete UNNAMED GROUPS
Wrong ETRACK behavior
progeCAD crashes during changing entities color
Cursor freezes when trying PERPENDICULAR snap to spline in NWUCS
Strecth by grips error of hatch entity
Command „Convert to Mesh“(3DCONVERT) does not work
Aligned dimension shows incorrect text for MSPACE entities in PSPACE
Fillet is created in wrong UCS
Setting zero scale for viewport causes crash
Periodical crash in Array command
LISP variable types are being promoted long to real and short to long
Deleted entity can not be added to the selection set
Fixed JUSTIFICATION > FIT error

Verzija 13.0.14.11

Ispravke i novine u verziji su:

Added PUBLISH command
Fixed several crashes
Fixed paper size order in print dialog
Restored name of block in QSELECT list
Fixed localization of some sentence in Recover manager dialog
LISP: Added vl-cmdf function to VLISP project
LISP: Added layoutlist lisp function
Inserted error message for conversion PDF to JPG
Upgraded PDF and JPG driver from version 4.5.3.3 to version 4.5.3.5
Fixed missing uninstall part for pdf printer
Fixed UCS toolbar, button ORIGIN.
PDF2CAD: set tickness to 0 for all entities converted
PDF2CAD: removed request to open files
PDF2CAD: fixed some messages
Fixed creation of PC3 with specific option in HP Djet 500 plotter
Fixed esnap NEAR to circle with little radius (0.1)
Fixed OFFSET error of 2Dpolyline
Fixed import of PGP files with tabs
Fixed icad.fmp file to remove substitution of fonts
Fixed crash opening drawing with password and scrollbars activated
Global linetpe scale – Property dialog not working
Fixed crash using Explorer->blocks
VBA: The method AddAttributeDef doesn’t assign current layer to entity
VBA: fixed several VBA methods
VBA: Block.Delete method is not supported
Restored default settings: User can restore only Menu or Toolbar
Removed message prompt for searching missing references
Added SNAPGRIDLEGACY variable to constrain cursor movement to GRID also when no command or selection active (default is off)
Added CTRL+ENTER to press OK button to close EATTEDIT dialog
Improved selection of attributes in EATTEDIT dialog directly on double clicked
Fixed crash pressing OK in print dialog
Fixed crash using property palette
Improved ability to cancel search of closed boundary in hatch dialog
Improved closed area recognition fixing various deadlocks and improved algorithm
Changed CH alias to ENTPROP command
Fixed filter names after creation in LAYERS dialog
Fixed paths tab in options dialog
VBA: Fixed property closed on object LWPolyline.
Added progressbar in hatch area compute and increased ESC management (also analyzing sub paths)
Added Autocad 2013-2014 clipboard format to allow PASTECLIP in autocad recent versions
Added check to avoid crash on COPYCLIP+PASTECLIP in another application
Fixed LAYFRZ command with dimension
Fixed crash on ESC on print preview
Fixed EXTRUDE command with large coordinate
Fixed direction of extrusion
Fixed search order for SHX files, now pcad first searches in drawing folder then in other search paths
Changed plot header and footer separator char from „,“ to „|“
Fixed API to set overridden plotting configurations
Fixed crash when dimassoc = 0 dimlinear doesn’t work.
Fixed DWFOUT command, now uses dialog to choose filename and uses parameters in dialog
Fixed VIEWPOINT command removing ESNAP when user type coordinates on keyboard
Fixed display of RECOVER message loading a corrupted file with double click
Removed plot length limit from paper size
Fixed attribute edit during INSERT command
Fixed INSERT with NWUCS
Fixed margins for plotters with large paper size (A1 etc.) removed PRINTAUTOROTATE variable behavior

Verzija 13.0.12.12

Ispravke i novine u verziji su:

Fixed change of path of images
Updated PDF Printer to Amyuni Document Converter 4.5.3.3
Fixed COPYBASE temporary removed grips before selecting base point
Added TEXSIZEGRANULARITY to change size of texture used as drawing plane
Fixed TXTEXP crash progecad selecting all drawing
Added MINOPENGL variable to set minimal OPENGL version requirement to activate HW display system
Added some missing SHX fonts duplicating and renaming existing and updated icad.fmp
Fixed _VIEW (R option) that makes always visible UCS icon
Removed confirm question creating an existing view using command -VIEW (W option) like autocad and progecad 2011
VBA : Fixed Lock property in Layer object
Changed drag of dxf files now it uses DRAGOPEN variable to choose to open or to insert a dxf file
Fixed load of old,bad CTB files made by old version of intellicad
Fixed POLYLINE command with negative angles and using always same angle values
Fixed display of images in NWUCS
Fixed all profiles problems
Added setting to force NVIDIA GPU to work with progecad with notebook with dual GPU
Fixed copyclip and paste in word
Fixed OBject option in UCS command
Fixed etrack point acquisition with NWUCS
Fixed command „Convert to Mesh“(3DCONVERT)
Added option to -TOOLBAR command to permit to delete all toolbars
Changed PICKBOXCOLOR to 7 (white) as default
Added delete option to -TOOLBAR command
Fixed VBA method SelectByPolygon.
Fixed usage of „=“ in -INSERT command
Added SETATT function in progecad.lsp
Fixed -INSERT command from menu with spaces instead of ‘;’, path for blocks should use “ to describe paths with spaces inside
Fixed redefinition of blocks only using „=“ in -INSERT command
Added check on already protected scripts in LispDefender
Fixed VIEWRES (ZOOMPERCENT), SPLINESEGS, FACETRES and ISOLINES variables in the CONFIG DISPLAY dialog
Fixed open of dwg files version 2013 that needs recover after conversion
VBA: Fixed „New“ of Point, Matrix, Vector, Points
Fixed name of printed document to allow print of PDF files
Grouped toolbar in popup menu
Fixed the bug with HATCH editing angle set
Fixed load of toolbar used also as flyout
Fixed getpoint with ortho from lisp
Fixed „inherits properties“ in hatch dialog now after use it once you can change properties
Added readalisfile function (available in lisp)
Fixed ETrack with TAN points
Fixed compounded (deferred) tangent between two circles (or arcs)
Fixed print of drawings with non ANSI chars (czech) using our PDF printer
Added ICAD environment variable management to set search paths
Fixed maximum length to 256 chars of command in imagemenu button
Added /perf parameter to log cursor display time
fixed for wireframe 3D printing problem
Fixed access violation on preview.
Reenabled scrollbars
Fixed load of flyout images from a dll
Added message to ask to overwrite a file in WBLOCK dialog
Fixed set of viewport visualstyle and removed useless shadeplot
Fixed menu check of UCSICON commands
Added „.dwg“ to file name in wblock dialog
Was removed error message when requested menu wasn’t found. (menucmd function does not require any massage)
Fixed background color and position of entities in pasted objects in Word
Improved copyclip and paste in word
Fixed COPYCLIP and CUTCLIP to copy only selected object
Fixed crash reloading a toolbar with missing flyout
Fixed greyvar for UCSICON commands in menu
Fixed crash after selecting a command from nested flyout in another flyout
Added ConfigurePrinters command, changed a menu item, changed a string in the CONFIG dialog
Fixed esnap EXT without any other esnap
Fixed load of nested flyout
Fixed Etrack point acquisition with INT and END esnap
Fixed performance searching files in network
Changed ESNAP menu in status bar, added EXTENSION snap and fixed APPARENT
Fixed hang on WBLOCK and crash closing progecad
Fixed TXT2MTXT bug with BYBLOCK color assignment
Fixed show of application during edit of embedded OLE object in other application (office/autocad)
Fixed open of embedded object in other application (autocad/office)
The REFEDIT toolbar get hidden at the end of REFEDIT command only if it was opened by the REFEDIT command and wasn’t already visible by its own
Added base.dcl to translate base tiles of dcl dialogs
Now base.dcl file is being first loaded from progeCAD root folder and if not found there – loaded from the resources
Added check on easyarch commands to avoid problems when there isn’t open drawing
Fixed crash selecting a dimension in a drawing with errors
Fixed PNEW preview image overlapping with bitmaps
Fixed the context menu appearing on „More“ button in MTEXT dialog
Added „VBA missing“ message on BATTMAN and other vba commans
Removed default values from ddattdef dialog and restored original sentence in command line version -ATTDEF
Fixed the Bullets and Lists changes in multi text editing
Changed list of command to exclude Recovery manager file recorder
Changed network path resolver to use different api to solve problems opening files on some NAS and other operating systems
Added „Zoom Fit“ button to the print preview dialog
Fixed „Select Entities“ button in properties palette
Changed color to white of background color in pasted image
Fixed Recovery manager to ignore „false saves“ during COPYCLIP and COPYBASE commands
Localized some strings in -IMAGEATTACH command
Fixed memory problem selecting image extension from file dialog in ATTACH command
World to paper space calculation is fixed for both linear and aligned dimensions.
Improved ESNAP perfromance in drawing with image and GRID active
Text with zero height can be created if switch text styles using toolbar
[VBA]Filtering of the entity does not work with SelectionSet.
Incorrect NEAREST snapping to arc if viewpoint is non planar and UCS is not world
Entity Properties toolbar should work regardless of PICKFIRST system variable
Fixed VIEWPOINT Crash
Can’t select drawing file version in WBLOCK dialog
Cannot to switch to PSpace by double click if something is selected inside viewport
Some entities in NWUCS are not being handled properly by (trans), Fix for Chamfer, Divide, Solid.
Aligned dimension shows incorrect text for MSPACE entities in PSPACE
ICAD cannot save drawing in some formats
Moving a grip intellicad freeze
Maximal possible value of AUTOSNAP variable shouldn’t be tied to default value
Fixed printing of large google earth imported images
Perpedicular snap doesn’t work properly
Strange behavior when you edit a text
Fixed STYLE / EXPSTYLES – font „(not found)“ error message is not true
Incorrect Nearest snapping to NWUCS mspace Spline in Layout
HATCH created with wrong elevation in NWUCS
Offset problem using esnaps
The stretch command does not allow a multiple window selection
WP selection doesn’t work properly for NW view
Switching ORTHO with F8 is not working for LISP commands
The stretch command does not allow a multiple window selection
Crash during LINETYPE command
If you execute an INSERT and press RMB then RTCAN has to be returned
The stretch command does not allow a multiple window selection
Linetypes with dots loose the dots on display
„_solidedit“ command. You can’t use a negative angle value to rotate a face
The stretch command does not allow a multiple window selection
Some block entities are not printed correctly in attached drawing
MASSPROP command ignores UCS
^P (menu echo) used in menus will cause an extra return when the menu item is activated
ICAD LISP interpreter is slower than ACAD
During placement the INSERT command creates a temporary entity in combination with OSMODE = 512
Redefine existing block does not work properly
The stretch command does not allow a multiple window selection
Wipeout frame is now always plotted
Audit errors are reported for text style with height = 0
SDS app which creates block table record failing with SPLINE, HATCH and curved POLYLINE.
INSERT with angle 0 is not previewed and placed at angle 0
[VBA] CAD crashes when adding an XDATA in „SetXData“ method.
sds_initget/sds_getpoint combination should return RTKWORD
Added missing XLIST command
The Stretch command doesn’t work on HATCH
_DTEXT , left-click inserts text
-PLOT command should work also with uppercase printer name from scripts
Creating ARC TANGENT issue
The value 360 degrees for Rotation angle is accepted
Record name duplication in AutoLinetypes table is not checked in COM interface
(EntMake) of polyline inside a block fails when returning SEQUENCEEND
OSNAP lisp function returns incorrect value for NWUCS MSPACE entities in Layout
[VBA] CAD crashes when you set the text to „TextString“ property.
Record name duplication in AutoLayers table is not checked in COM interface
_DTEXT , left-click inserts text
Record name duplication in AutoDimensionStyles table is not checked in COM interface
Record name duplication in AutoBlocks table is not checked in COM interface
Incorrect behavior ARC / Follow option after erasing previously created ARC
PLATFORM sysvar is not supported correctly, it returns and empty string.
Text Middle-Center Justification issue
Polar does not work fine using a rotated UCS
I just ran an audit and had 16 errors. I ran again to fix errors and the crash report appeared
Insert fails when the file path doesn’t contains the extension
SAVEAS – Default Save As Format Option not honoured when FILEDIA Off
With ANGBASE=90, the rotation of the asixs is not correct
Issue during linetype typeing
Inserting Hatch problem
It is not possible to create an OdDbMaterial object via (entmake).
ICAD’s window becomes unfocused after turning the current layer off through the entity properties toolbar

 

Verzija 13.0.10.6

Ispravke i novine u verziji su:

Fixed save of position of toolbars.
Fixed a bug with 0 gap tolerance in hatch dialog.
Fixed property bar using visual styles from drawing not old visualization configurations
Fixed viewport ucsicon using ROTATE and INSERT commands
Fixed visualization of available commands in menu and toolbar customization dialog
Added „Open containing folder“ command to window menu
Fixed position of UCSIcon changing viewpoint
Fixed some crashes on edit and creation commands
Fixed UCS bug with international options like _FRONT, _TOP, etc
Fixed UCS II toolbar, added new buttons
Fixed crash using snap CEN on some surfaces
Improved cursor speed when esnap is on, grid is off and at least one image is inserted
Fixed illumination factor for Easyarch windows
Fixed the bug with BYLAYER color selection in DDEDIT dialog
Fixed the bug with layer rename while creating the layer with a group active
Fixed hang after problem editing grip of a polyline
Fixed plotting window specification with ORTHO ON
Fixed perpendicular esnap with UCS different from global
Fixed POLAR with UCS not world
Added esnap menu to esnap context menu in status bar
Fixed Ortho and Polar on first point
Fixed insert image into layout
Fixed Direct Distance Entering with grips
Added use of Direct distance entering using ETrack points
Fixed printing image with setting FADE(image property)
Fixed @ operator.
Improved Paper space esnap
Fixed the bug with LAYERS dialog on creating new drawing
Fixed freeze on QDIM command
Fixed the bug with GAP TOLERANCE in BHATCH dialog. Added a variable to remember the BHATCH dialog width
Fixed the bug with a horizontal line in the ruler in the MTEXT dialog
Fixed the bug with layer rename and implemented the assignment of a layer to a selected group filter
Fixed paper space esnap and improved etrack functions
Center snap is not detected is move the cursor to the center of a circle located in a viewport
PASTESPEC to have more choices when pasting region from Excel
Some snaps are not detected if enable Nearest and Extension snaps
Only two quadrant snaps are detected for a circle in a viewport
Nearest snap glyph is not displayed if enable Nearest and Parallel snaps
Wrong snap is detected if enable parallel, intersection and tangent snaps
PEDIT -> Edit vertices, glyph does not show until mouse is moved
Fixed DIMRADIUS on TTR trimmed circle get dim text mirrored
When Autocomplete feature is enabled – it may cause to impossibility to choose the drawing in file dialog
LIST should display the material if it is not By layer
unable to define a circle specifing its radius (inches value)
Entities doesn’t appear after undo of hide layer using Explorer
MASSPROPIncorrect „Bounding Box“ field’s value after saving
VPLAYER to support wildcards in layer names
-Layer does not print a message when trying to freeze the current
Fixed creation of an OdDbMaterial object via (entmake)
Fixed crash in ESNAP on polyline during ROTATE and view rotating with CTRL+Mouse
LISP – Not equal [ /= ] does not work properly in case of lists
Graphic disappears if run 3DORBIT and grab left/right circle on the rotation sphere
Fixed Crash during print
Fixed MTEXT tabulation in MTEXT editor
COPY command with enabled ortho creates wrong entity
STYLE command can lead to deadlock and data loss on Escaping
ATTEXT – Cannot extract attribute data from a dwg.
With esnap extension can’t acquire etrack point using Mid
Pressing ESC on INSERT command ads returned code is RTNORM not RTCAN
Redefine existing block does not work properly
The TAG of attributes and AttDefs are not created in Uppercase
LISP (entget) doesn’t extract XDATA for entities in attached drawing
Changing the background color is not updated all open drawings

Uslovi korišćenja

Godišnji odmor

Od 10. jula do 21. jula smo na godišnjem odmoru.

Vaše narudžbine će biti obrađene posle 21. jula.

Hvala na razumevanju,
Vaš LIMIS doo